Description of Works Sample Clauses

Description of Works. Subject to clause 6.11, the Contractor must construct the Works in accordance with: the Works Description and any Design Documentation issued by the Contract Administrator under clause 8.8 (if Option 1 of that clause applies); if the Contract requires the Contractor to design any part of the Works, any Design Documentation prepared by the Contractor in accordance with the requirements of the Contract and which the Contractor is entitled to use for construction purposes under clause 6.3; any direction of the Contract Administrator given or purported to be given under a provision of the Contract, including any Variation directed by the Contract Administrator by a document titled "Variation Order"; and the other requirements of the Contract. All Work Included The Contractor has allowed for the provision of all Plant, Equipment and Work, materials and other work necessary for the Contractor's Activities, whether or not expressly mentioned in the Works Description or any Design Documentation. Any such Plant, Equipment and Work, materials and other work: must be undertaken and provided by the Contractor; and forms part of the Contractor's Activities and will not entitle the Contractor to make a Claim except as otherwise provided for in the Contract. Statutory Requirements The Contract Particulars specify the Approvals which exist at the Award Date or which the Commonwealth will obtain after the Award Date. In carrying out the Contractor's Activities, the Contractor must: unless otherwise specified in the Contract Particulars, comply with all applicable Statutory Requirements; without limiting subparagraph (i): apply for and obtain all Approvals other than those specified in the Contract Particulars; and give all notices and pay all fees and other amounts which it is required to pay in respect of the carrying out of its Contract obligations; and promptly give the Contract Administrator copies of all documents (including Approvals and other notices) that any authority, body or organisation having jurisdiction over the Site, the Contractor's Activities or the Works issues to the Contractor. Change in Statutory Requirements or Variance with Contract If: there is any change in a Statutory Requirement after the Award Date; or a Statutory Requirement is at variance with the Contract, then the party discovering the change or variance must promptly give the Contract Administrator and the other party notice in writing. The Contract Administrator must, within 14 days of re...
AutoNDA by SimpleDocs
Description of Works. Hire of plant and equipment on an “as required” basis during the period undermentioned:-
Description of Works. 2. Details: .
Description of Works. The Contractor must construct the Works only in accordance with: the Design Documents; any design prepared by the Contractor and for which the Contract Administrator has given permission to use under clause 5.2; any direction of the Contract Administrator, including a Variation directed by the Contract Administrator by a written document titled "Variation Order"; and any other requirement of the Contract. The Contractor must, without adjustment of the Contract Price, provide all work or materials necessary for the Contractor's Activities and which a prudent, competent and experienced contractor should have realised would have been required whether or not expressly mentioned in the Design Documents or the design prepared by the Contractor which the Contract Administrator has given permission to use under clause 5.2.
Description of Works. [What is the nature of the Works?] [How should the Works be delivered?] [Refer to any proposal prepared by the Contractor if this helps describe any aspects of the Service.]
Description of Works. The Contractor must construct the Works in accordance with: the Design Documents; if the Contract requires the Contractor to design any part of the Works, the design prepared by the Contractor which the PDS Contractor has given permission to use under clause 5.2; any direction of the PDS Contractor, including a Variation directed by the PDS Contractor by a written document titled "Variation Order"; and the other requirements of the Contract. The Contractor must, without adjustment of the Contract Price, provide all work or materials necessary for the Contractor's Activities and which a prudent, competent and experienced contractor should have realised would have been required whether or not expressly mentioned in the Design Documents or the design prepared by the Contractor which the PDS Contractor has given permission to use under clause 5.2. Resolution of Ambiguities If there is any ambiguity, discrepancy or inconsistency in the documents which make up the Contract, the order of precedence specified in the Contract Particulars will apply. If any ambiguity, discrepancy or inconsistency in any documents which make up the Contract is discovered by the Contractor or the Commonwealth, then the party discovering it must give the PDS Contractor and the other party notice in writing. The PDS Contractor must direct the Contractor as to the course it must adopt within 14 days of receipt of a notice from a party. If the Contractor believes the direction constitutes a Variation it must give notice to the PDS Contractor under clause 10.4 before it complies with the direction.
Description of Works. The Contractor must construct the Works in accordance with: the Works Description; if the Contract requires the Contractor to design any part of the Works, the design prepared by the Contractor which the Contract Administrator has given permission to use under clause 5.2; any direction of the Contract Administrator, given or purported to be given under a provision of the Contract, including a Variation directed by the Contract Administrator by a written document titled "Variation Order"; and the other requirements of the Contract. The Contractor must, without adjustment of the Contract Price, provide all work or materials necessary for the Contractor's Activities and which a prudent, competent and experienced contractor should have realised would have been required whether or not expressly mentioned in the Works Description or the design prepared by the Contractor which the Contract Administrator has given permission to use under clause 5.2.
AutoNDA by SimpleDocs
Description of Works. The scope of works shall include, but not be limited to, the following items in accordance with the specification and the drawing(s), Review the Record Plans and any relevant information of the building to design and construct the required alteration work as specified to the satisfaction of the Employer’s Representative; Conduct liaison meetings with the occupants of the sites and submit proposal to the Employer’s Representative for approval regarding the arrangement of possession of site, protection to properties nearby, site security, power shut down, duration and extent of temporary power supply; Making necessary provision and conduct briefing sessions to the occupants of the sites for the details of the approved work program and working sequence; Conduct a survey and submit a survey report within 1 week after the issue of Service Order on the existing conditions of the site and the areas nearby. The report shall include site photo in digital format and identify in detail the defects of the existing property; Submit a completion report endorsed by the AP showing the conditions of the completed works 1 day before the completion of Contract. The format and content of the completion report shall be correspond to the submitted survey report with all the updated conditions of the property; Submission of Design drawings and shop drawings showing the details of works to be carried out to the Employer’s Representative for approval; Make all necessary submission to the Building Authority in good time; Obtain the necessary permit/consent/approval from the Building Authority before carrying out the work; Carry out building and Electrical & Mechanical Systems modification work in accordance with the design intent detailed in the Contract Drawings, Site Information Schedules, Particular Specification and other parts of the Contract Document; Allow work to be carried out during night time or holidays as instructed by the Employer’s Representative; Carry out site cleaning work and remove all rubbish, surplus materials, tools and equipment from the sites to the satisfaction of the Employer’s Representative; Provision of as-fitted drawing, O&M manuals, recommended spare part list and C&T report; Make good the existing architectural finishes for the parts altered by the Contractor to the satisfaction of the Employer’s Representative; Submission of detailed work programme, shop drawings, design calculations, offered equipment/material catalogues & technical information an...
Description of Works. The works to be executed under the Contract comprise the following major items of Works:- • Cargo clearance facilities including kiosks for clearance of good vehicles, customs inspection platforms, X-ray building, etc.; • Passenger related facilities including processing kiosks and examination facilities for private cars and coaches, annexure for examination of accompanying passengers of private cars, etc.; • Accommodation/offices for the facilities (like fire station, police station, buildings for ImmD, C&ED, AFCD, FHED, DofH etc.) of the Government departments providing services in connection with the Hong Kong Boundary Crossing Facilities (HKBCF). • Provision of transport and miscellaneous facilities inside the HKBCF including 中國港灣工程有限公司 Regular Marine Travel Routes Plan China Harbour Engineering Co., Ltd. Contract No.: HY/2013/03 public transport interchange (PTI), transport drop-off and pick-up areas, vehicle holding areas, passenger queuing areas, road networks, footbridges, fencing, sewerage and drainage systems, sewage treatment plant and treated effluent disposal facilities, water supply system, building services works, electronic system, and traffic control and information system including traffic control and surveillance system (TCSS), etc.; • Provision of roads connecting the Hong Kong Boundary Crossing Facilities (HKBCF) to the Hong Kong Link Road (HKLR), the Tuen Mun – Chek Lap Kok Link (TM-CLKL) and the Hong Kong International Airport (HKIA), except the part of road works in HKIA entrusted to the HKLR project; • Reprovisioning of the affected HKIA’s facilities, except those affected by the Automated People Mover (APM) system such as the existing east rescue berth; The works mainly include the construction of vehicle clearance plazas, ancillary buildings and facilities, vehicular bridges, at-grade roads, drainage, sewerage, water supplies, landscape, utilities and electrical and mechanical works, etc. for Hong Kong-Zhuhai-Macao Bridge Hong Kong Boundary Crossing Facilities. The main scope of works under the Contract does not include marine construction or vessel operation related to construction works. 中國港灣工程有限公司 Regular Marine Travel Routes Plan China Harbour Engineering Co., Ltd. Contract No.: HY/2013/03 2 Planning on Regular Marine Travel Routes
Description of Works. Site GradingEnvironmental protection • Clearing, grubbing, stripping, excavation and grading of road right of ways and drainage easementsStripping and rough grading of remaining Lots and Blocks to facilitate redistribution of fill on site and ensure proper drainage • Restoration, including placement of topsoil and sod/seed and rip rap of channels, xxxxxx and exposed slopes • Installation of retaining walls and privacy fencing Installation of Utilities • Installation of water, sanitary and storm sewer infrastructure • Testing and CCTV inspection Road WorksPlacement and compaction of granular road base • Placement and compaction of base course asphalt Pond Improvements • Modification/installation of inlet and outlet structures • Regrade/raise pond berm and adjust perimeter fencing SCHEDULE "C" OF PRE-SERVICING AGREEMENT DESCRIPTION OF PHASES Works will be completed for the Owners entire property further described as Phase 1 of Xxxxxxxxxx Ridge East. No further phasing is proposed. SCHEDULE "D" OF PRE-SERVICING AGREEMENT TIME SCHEDULE FOR CONSTRUCTION OF WORKS Schedule of Works is estimated to be between June 12, 2017 and September 31, 2017 SCHEDULE “E” PLANS FOR WORKS TO BE CONSTRUCTED SP1 SITE PLAN EC EROSION CONTROL G1 GRADING PLAN NORTH PORTION G2 GRADING PLAN SOUTH PORTION X0 XXXXXXXXX XXXXXX- PLAN AND PROFILE C2 STREET A - PLAN AND PROFILE C3 STREET B - PLAN AND PROFILE PND POND PLAN AND X-SECTION S1 EP ZONE & CHANNEL MODIFICATION S2 CHANNEL PROFILE AND CROSS SECTIONS S3 CHANNEL CROSS SECTIONS T1 TYPICAL DETAILS T2 GENERAL NOTES SA1 SANITARY SEWER DRAINAGE AREAS SA2 STORM SEWER DRAINAGE AREAS RW1 RETAINING WALL AND PRIVACY FENCE THE ORIGINAL PLANS LISTED IN THIS SCHEDULE AND INCORPORATED BY REFERENCE INTO THIS AGREEMENT ARE NOW ON FILE IN THE MUNICIPAL OFFICES AND SHALL GOVERN IN THE EVENT OF ANY DISPUTE. SCHEDULE "F" OF PRE-SERVICING AGREEMENT N/A SCHEDULE "G" OF PRE-SERVICING AGREEMENT N/A SCHEDULE "H" OF PRE-SERVICING AGREEMENT GRANTS OF EASEMENT AND OTHER PUBLIC LANDS LANDS to be DEEDED FOR ROAD EXTENSION PT LT 34 CON A Brighton Pts 2, 3, 4, 5, 7, 8, 9, 10 39R13556 Municipality of Brighton County of Northumberland EASEMENT LANDS PT LT 34 CON A Brighton XX 0 & 0 XX 00X00000 XXXXXXXX "I" OF PRE-SERVICING AGREEMENT N/A SCHEDULE "J" OF PRE-SERVICING AGREEMENT SPECIAL CONDITIONS Staged Construction
Time is Money Join Law Insider Premium to draft better contracts faster.