How to Obtain Warranty Service. The Warranty Holder must inspect the Flooring for Manufacturing Defects caused by improper milling, grading, staining, and coating, and report any such defects to Cali Bamboo, prior to installation of the Flooring. To obtain warranty service, the Warranty Holder must contact Cali Bamboo’s Customer Experience Department: xxxxxxxxxxxxxxx@xxxxxxxxxx.xxx/ 000- 000-0000. Warranty claims must be received within 30 calendar days after the Warranty Holder identifies the Manufacturing Defect or other basis for a warranty claim. To be covered under this Cali Bamboo limited warranty, the Warranty Holder must provide documentation of sales order and proof that the Flooring was properly installed in accordance with the Installation Guide (defined below). Cali Bamboo reserves the right to retain a certified and independent National Wood Flooring Association inspector (“NWFA Inspector”) to verify the Warranty Holder’s warranty claims. The determination of the NWFA Inspector regarding the warranty claim is not binding on either Cali Bamboo or on the Warranty Holder. A determination that does not verify the warranty claim shall not affect the Warranty Holder’s right to submit its claim to arbitration in accordance with the terms of the Arbitration Agreement (as defined in Cali Bamboo’s Terms and Conditions of Purchase). The performance of the inspection, however, if requested by Xxxx Xxxxxx and assuming that Xxxx Xxxxxx advances the full cost of the inspection as described above, is a requirement for the Warranty Holder to submit a warranty claim to arbitration under the Arbitration Agreement. For specific instructions on how to obtain warranty service for defective Flooring, visit the Cali Bamboo website xxxxx://xxx.xxxxxxxxxx.xxx/flooring-warranty/. Warranty Exclusions and Limitations: This limited warranty covers Flooring that is both (i) installed with strict adherence to Cali Bamboo’s Odyssey Engineered flooring installation guide found online at xxxxx://xxx.xxxxxxxxxx.xxx/flooring-installation/ (the “Installation Guide”) and
How to Obtain Warranty Service. If the warranty holder feels the product is defective or has any other claim under the warranty, the owner must make a claim in writing to APPLETON BUILDING PRODUCTS®, DIVISION OF APPLETON SUPPLY® CO., INC., Customer Service Department, 0000 Xxxx Xxxxxxx Xxxxxx, Xxxxxxxx XX 00000. The written claim notification must set forth the owner's name and address, a brief description of the product and defect, and include copies of the original warranty certificate and receipt or agreement with contractor if installed by a contractor. Claims will be considered made on the date APPLETON receives the claim notification. APPLETON has the right to inspect the product on the owner's premises to determine that the product has failed to meet the terms of this warranty. Within a reasonable time after receiving the warranty claim notice, APPLETON will notify the owner whether the claim has been accepted and, if so, how it intends to remedy the defect under this warranty. Any claim notification received by APPLETON after the end of the lifetime of the original installation on the structure on which the products are originally installed shall not be covered by this warranty. WHAT WE WILL DO. APPLETON will assume 100 percent of the cost of material and labor for repair, replacement or refinishing, at its option, for claims made during the first two (2) years of the warranty period. Thereafter APPLETON will be responsible for the cost set forth above based on when a claim is made on the following prorated basis, and the owner shall be responsible for the difference: 90 percent during the third year, 5 percent less than the preceding year for each succeeding year through the eighteenth year, and thereafter APPLETON will pay 10 percent through the end of the warranty period. APPLETON reserves the right to change or discontinue any of its products. If the products covered by the warranty are not available at the time the claim is made, APPLETON shall have the right to substitute a product that is of equal quality or value. The original warranty periods shall not be extended by any warranty claim. A color variance may occur between the replacement product and the original product as a result of weathering and is not a material defect. APPLETON also has the option of refunding the owner's original purchase price of the product and cost of installation, if any. All warranty work will commence by APPLETON or its agents within six (6) months of receipt of a written claim. LIMITATION OF...
How to Obtain Warranty Service. You must keep a copy of the original repair invoice and present it when seeking service under this warranty. If warranty work is performed, you must temporarily surrender possession of the original repair invoice, or a legible copy of the same. If you are less than 25 miles away from the original repair Facility, you must return your vehicle to that Facility for any warranty repairs. If you are more than 25 miles from the original Facility, then you must call the Warranty Administrator prior to any warranty repair work being performed, at 000-000-0000, from 8:00 a.m. to 8:00 p.m. Monday through Friday (Eastern Time), Saturday from 9:00 a.m. to 6:00 p.m., excluding holidays. The Administrator will provide to you the nearest participating Facility. If there are no participating locations in your area, you may take your vehicle to a non-participating Repair Facility in your area. If the non- participating Repair Facility will not accept payment from the Warranty Administrator, you must pay for the warranty service and submit your original repair invoice (or legible copy) and subsequent warranty repair invoice (or legible copy) to the Administrator for review, within 90 days of the date of repair. If your vehicle is inoperable, and you are further than 25 miles from the original facility, you may be eligible for certain towing benefits, to a maximum of $60.00. You may also be eligible for Rental Car benefits if your vehicle cannot be repaired the same day due to circumstances beyond your control. The maximum benefit would be for 2 days at a maximum of $40.00 per day, as determined by the Warranty Administrator.
How to Obtain Warranty Service. If the product does not function as warranted during the warranty period, you may obtain warranty service by contacting Lenovo or a Lenovo approved Service Provider. A list of approved Service Providers and their telephone numbers is available at: xxx.xxxxxx.xxx/xxxxxxx/xxxxx. Warranty service may not be available in all locations and may differ from location to location. Charges may apply outside a Service Provider’s normal service area. Contact a local Service Provider for information specific to your location.
How to Obtain Warranty Service. To obtain warranty service, Purchaser must obtain an RMA (Return Material Authorization Number) and instructions on how and where to return the products from StarTek’s Customer Service through their website at xxx.xxxxxxxxxxxxxxxxxxxxxx.xxx/xxxxxxxx.
How to Obtain Warranty Service. To obtain warranty service, you must deliver the Product, in either its original packaging or packaging providing an equal degree of protection, to the address specified by Fitbit. In accordance with applicable law, Fitbit may require that you furnish proof of purchase details and/or comply with registration requirements before receiving warranty service. It is your responsibility to backup any data, software, or other materials you may have stored or preserved on the Product. It is likely that such data, software, or other materials will be lost or reformatted during service, and Fitbit will not be responsible for any such damage or loss. For specific instructions on how to obtain warranty service on your Product, visit the Fitbit website (xxx.xxxxxx.xxx/xxxx).
How to Obtain Warranty Service a. To obtain warranty service for a Covered Product, the Covered Owner must comply with the Return Merchandise Authorization (RMA) Procedure available at xxxxx://xxxxxxx.xxx/en- us/support/return-merchandise-authorization-procedure. If Enphase instructs the Covered Owner to return the Covered Product to Enphase, the RMA Procedure allows Covered Owners to generate a prepaid mailing label for the return. If a Covered Owner returns a Covered Product to Enphase (a) without an RMA from Enphase or (b) without all parts included in the original package, Enphase retains the right to either (1) refuse delivery of such return; or (2) charge a restocking fee equal to the higher of fifteen (15) per cent of the original Covered Owner’s purchase price of the Covered Product or the retail value of the missing parts. We recommend that Covered Owners use a tracking service for their protection.
How to Obtain Warranty Service a. To obtain warranty service for a Covered Product, the Covered Owner must comply with the Return Merchandise Authorization (RMA) Procedure available at xxxxx://xxxxxxx.xxx/en- us/support/return-merchandise-authorization-procedure. Unless Enphase specifically instructs the Covered Owner otherwise, the Covered Owner must return the allegedly defective Covered Product to Enphase in the original packaging or equivalent. If the allegedly defective Covered Product is not received by Enphase within 60 days of Enphase providing an RMA number to Covered Owner, pursuant to the RMA Procedure, Enphase will invoice the Covered Owner, and the Covered Owner will pay, the then-current list price for such new Covered Product or replacement product. We recommend that Covered Owners use a tracking service for their protection. The RMA Procedure allows Covered Owners to generate a prepaid mailing label for the return.
How to Obtain Warranty Service. Upon discovery of any defect, malfunction or nonconformity in the Covered Product, the buyer must promptly notify Fortress in writing by sending an e- mail communication to customer service @ xxxx@xxxxxxxxxxxxxxxxxxxxx.xxx or by calling @ (000) 000-0000 to speak to a customer service representative. Upon confirmation that the defect, malfunction or nonconformity qualifies as a warranty repair or replacement, Fortress Industries may choose one of the following options for obtaining warranty service and repairs: Ship product to Fortress Industries for repair or replacement The buyer should carefully pack the Covered Product, preferably in the original packing materials, and deliver it, together with a copy of the original purchase receipt and a description of the problem, and ship the product to: Fortress Industries C/O Warranty Repairs, 00000 Xxxxxx Xxx Unit B, Chino CA 91710 Repair product through an independent authorized service center The buyer may secure the services of an independent repair or service facility for the service or repair of the Covered Product, when service or repair of the goods can be economically accomplished. In that event, Fortress Industries will reimburse the independent repair or service facility for the reasonable cost of service and repair, including any cost for parts, reasonable labor cost and any reasonable cost of transporting the goods or parts. If the buyer sends the product ships the product via mail, ground, air or LTL, we recommend that the buyer insure it and send it with shipping tracking requested. We accept no liability for products lost or misplaced in shipment. Return product to seller for service, exchange or replacement The buyer may return the Covered Product to the retail seller, or to any retail seller of like goods of the same manufacturer, who will do one of the following:
How to Obtain Warranty Service. If the product is not functioning properly, please contact our representative. Our representative will help determine whether our product requires service and, if it does, will inform you how we will provide it.
