Use of Supplier’s design Sample Clauses

Use of Supplier’s design. First read core clause 22.1 and then include here the exceptions and other purposes if applicable. If there are none this section could be deleted leaving the core clause to stand.
Sample 1Sample 2Sample 3See All (6)
AutoNDA by SimpleDocs
Use of Supplier’s design. Not applicable
Sample 1Sample 2
Use of Supplier’s design. The Supplier is to comply with the specifications as stated in the standard 240-128700801 Technical Evaluation Criteria and Technical Specifications Standard 240-45395762 for pole and ground mounted transformers.
Sample 1
Use of Supplier’s design. First read core clause 22.1 and then include here the exceptions and other purposes if applicable. If there are none this section could be deleted leaving the core clause to stand. Manufacture & fabrication Although the Purchaser does not usually prescribe how the goods are to be manufactured and fabricated, if there are any specific requirements they could be stated here. Factory acceptance testing (FAT) Core Clauses 40 and 41 both make reference to the Goods Information regarding tests and inspections. There are often comprehensive requirements for testing at place of manufacture and before delivery. State whether the tests are to be witnessed by the Supply Manager or by a testing agency of the Purchaser’s nomination. Note, Supplier may not restrict Supply Manager’s right to witness tests per clause 25.2
Sample 1
Use of Supplier’s design. The Suppliers supplied information will be used for the in installation and the commissioning of the works information. Manufacture & fabrication As per Schindler design Factory acceptance testing (FAT) The Contractor is required to conduct the necessary Factory Acceptance Testing (FAT) and Site Acceptance Testing (SIT) of the Plant. Other tests and inspections and commissioning in place of use The Employer’s On-Site Commissioning for Low Pressure Systems Standard 240-56356376 commissioning procedure will be adhered to, and Inspection, Testing and Maintenance of Lifts, Escalators and Passenger Conveyors Standard 240-75850027. Operating manuals and maintenance schedules All documents supplied by the Contractor shall be subject to Eskom’s approval. The language of all documentation shall be in English. The Contractor shall include the Employer’s drawing number in the drawing title block. This requirement only applies to design drawings developed by the Contractor and his Subcontractors. Drawing numbers will be assigned by the Employer as drawings are developed. The Contractor supplies the following manuals: Operating manual Maintenance manual The manuals conform to the specifications set out in this Works and are submitted to the Employer for acceptance Supply Requirements The Supply Requirements for this contract are in an Annexure to the Contract Data provided by the Purchaser. Specification of the services to be provided Constraints on how the Supplier Provides the Goods Programming constraints None Work to be done by the Delivery Date All equipment required for the completion of the works for the installation and commissioning of the works. Marking the goods As required for identification of parts numbering Constraints at the delivery place and place of use None Cooperating with Others None, except that the goods will have to be source directly from the OEM, which in these contract will be Schindler. Services & other things to be provided by the Purchaser or Supplier The supply, delivery to site, installation, testing and commissioning of the equipment as per the scope of work.
Sample 1
Use of Supplier’s design. As per OEM. Manufacture & fabrication As per OEM. Factory acceptance testing (FAT) QC to be done with the end user before and after delivery Other tests and inspections and commissioning in place of use All relevant required certificates to be supplied Operating manuals and maintenance schedules N/A Supply Requirements Batches to be clearly xxxx and packed according to the price list or scope Specification of the services to be providedAll equipment / spares must be on time of required order date  Transported by road on suppliers costs and transport  End user to be informed when delivery will be done at least 2 days upfront  No deliveries to be done on a Friday, Weekend or public holiday  Pellets to convey the batch must be strong enough to carry and transport load at anytime Constraints on how the Supplier Provides the Goods Programming constraints  All equipment / spares must be on time of required order date  Transported by road on suppliers costs and transport  End user to be informed when delivery will be done at least 2 days upfront  No deliveries to be done on a Friday, Weekend or public holiday  Lead time to be negotiated upfront to ensure that end user will receive materials, spares / equipment in time  All vehicles to be roadworthy Work to be done by the Delivery Date .  All equipment / spares must be on time of required order date  Transported by road on suppliers costs and transport  End user to be informed when delivery will be done at least 2 days upfront or other decided by end user on a as and when required basis  No deliveries to be done on a Friday, Weekend or public holiday  Lead time to be negotiated upfront to ensure that end user will receive materials, spares / equipment in time Marking the goods  Batches to be clearly xxxx and packed according to the price list or scope  All nuts and washers to be packed separately in a good and strong container / bag. Constraints at the delivery place and place of use  End user will determine the offloading point at time  Fork with driver will be supplied for off loading  Pellets to convey the batch must be strong enough to carry and transport load at anytime Cooperating with Others  Co-operation with others will be from time to time and on a as and when required basis decided by the end user Services & other things to be provided by the Purchaser or Supplier Number Title Issued by Act 85 of 93 Occupational Health and Safety Act Supplier Spares Insurance Cover Supplier Manag...
Sample 1
Use of Supplier’s design. First read core clause 22.1 and then include here the exceptions and other purposes if applicable. If there are none this section could be deleted leaving the core clause to stand. Manufacture & fabrication Although the Purchaser does not usually prescribe how the goods are to be manufactured and fabricated, if there are any specific requirements they could be stated here.
Sample 1
AutoNDA by SimpleDocs
Use of Supplier’s design 
Sample 1

Related to Use of Supplier’s design

  • Use of sub-processors (a) The data importer has the data exporter’s general authorisation for the engagement of sub-processor(s) from an agreed list. The data importer shall specifically inform the data exporter in writing of any intended changes to that list through the addition or replacement of sub-processors at least thirty (30) days in advance, thereby giving the data exporter sufficient time to be able to object to such changes prior to the engagement of the sub-processor(s). The data importer shall provide the data exporter with the information necessary to enable the data exporter to exercise its right to object.

  • Use of Sub-Contractors A framework of practical business provisions. Edit as you require. This ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ - ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ .

  • Use of Subcontractors Nothing in this Appendix 2 shall prevent the Interconnection Parties from utilizing the services of subcontractors as they deem appropriate to perform their respective obligations hereunder, provided, however, that each Interconnection Party shall require its subcontractors to comply with all applicable terms and conditions of this Appendix 2 in providing such services.

  • Use of Software Any software that is available on the Services ("Software") is the copyrighted work of Red Hat and/or its licensors. Copying or reproducing the Software to any other server or location for further reproduction or redistribution is strictly prohibited, unless such reproduction or redistribution is permitted by a license agreement accompanying such Software. You may not create derivative works of the Software, or attempt to decompile or reverse-engineer the Software unless otherwise permitted by law. Use of the Software is subject to the license terms of any license agreement that may accompany or is provided with the Software. You may not download any Software until you have read and accepted the terms of the accompanying software license. WITHOUT LIMITING THE FOREGOING, THE SOFTWARE IS WARRANTED, IF AT ALL, ONLY ACCORDING TO THE TERMS OF THE SEPARATE LICENSE AGREEMENT ACCOMPANYING THE SOFTWARE. EXCEPT AS WARRANTED IN SUCH LICENSE AGREEMENT, RED HAT, ITS PARENT, SUBSIDIARY, AND AFFILIATE COMPANIES, AND ITS LICENSORS DISCLAIM ALL WARRANTIES AND CONDITIONS WITH REGARD TO THE SOFTWARE, INCLUDING ALL IMPLIED WARRANTIES AND CONDITIONS OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, TITLE AND NON-INFRINGEMENT, TO THE MAXIMUM EXTENT PERMITTED BY LAW.

  • Use of Materials There should be no limitations or restrictions by Union upon a Contractor's choice of materials or design, nor, regardless of source or location, upon the full use and utilization, of equipment, machinery, packaging, precast, prefabricated, prefinished, or preassembled materials, tools or other labor saving devices, subject to the application of the California Public Contract and Labor Codes. Generally, the onsite installation or application of such items shall be performed by the craft having jurisdiction over such work.

  • Use of Logos The Company hereby consents to the use of its and its Subsidiaries’ logos in connection with the Debt Financing so long as such logos (i) are used solely in a manner that is not intended to or likely to harm or disparage the Company Group or the reputation or goodwill of the Company Group; (ii) are used solely in connection with a description of the Company, its business and products or the Merger; and (iii) are used in a manner consistent with the other terms and conditions that the Company reasonably imposes.

  • Modification of Licensed Materials The Participating Institutions or the Authorized Users shall not modify or manipulate the Licensed Materials without the prior written permission of the Licensor.

  • Use of websites (a) The Company may satisfy its obligation under this Agreement to deliver any information in relation to those Lenders (the “Website Lenders”) who accept this method of communication by posting this information onto an electronic website designated by the Company and the Agent (the “Designated Website”) if:

  • Use of Common Areas Tenant shall have the nonexclusive right (in common with other tenants and all others to whom Landlord has granted or may grant such rights) to use the Common Areas for the purposes intended, subject to such reasonable rules and regulations as Landlord may establish from time to time. Tenant shall abide by such rules and regulations and shall use its best effort to cause others who use the Common Areas with Tenant's express or implied permission to abide by Landlord's rules and regulations. At any time, Landlord may close any Common Areas to perform any acts in the Common Areas as, in Landlord's judgment, are desirable to improve the Project. Tenant shall not interfere with the rights of Landlord, other tenants or any other person entitled to use the Common Areas.

  • Use of Data by User Registry Operator will permit user to use the zone file for lawful purposes; provided that (a) user takes all reasonable steps to protect against unauthorized access to and use and disclosure of the data and (b) under no circumstances will Registry Operator be required or permitted to allow user to use the data to, (i) allow, enable, or otherwise support the transmission by email, telephone, or facsimile of mass unsolicited, commercial advertising or solicitations to entities other than user’s own existing customers, or (ii) enable high volume, automated, electronic processes that send queries or data to the systems of Registry Operator or any ICANN-­‐accredited registrar.

Time is Money Join Law Insider Premium to draft better contracts faster.