Quality Assurance Requirements definition

Quality Assurance Requirements means the stability testing and quality assurance requirements set forth on EXHIBIT A attached hereto.
Quality Assurance Requirements. The Contractor shall comply with all quality requirements as set out in the document QM-58 i.e. Eskom Contract Quality Requirements Specification.  The Contractor shall comply with ISO9001:2008 Quality Management System Requirements.  The Contractor shall comply with all other regulatory and statutory requirements applicable to the works.  The Contractor needs to submit a quality plan indicating the control points for quality to ensure that the works are done according to specification.  Quality of workmanship;  The Contractor is required to employ a competent Supervisor or Foreman on site for the duration of the work issued per Task Order to implement workmanship quality checks.  Eskom will do inspections and quality checks on installations completed by the Contractor prior to hand-over of each project General  Except for site management and specialized labour such as operators for plant and equipment, the Contractor is encouraged to use “local” labour on a temporary basis for all manual tasks.  The Contractor will attend all site meetings as arranged by the Employer  The Contractor will report all obstacles on site that could impact on time and cost to the Employer in writing. Where applicable Early Warnings should be issued  All work/services shall be carried out in accordance with all the statutory requirements applicable to the area and scope, Eskom’s specifications, standards and regulations  The Contractor will be given access to the proposed site and the Contractor must comply with Eskom’s, National, Provincial and Local environmental policies, safety standards and laws.  The onus is on the Contractor to obtain the latest revision of standards applicable.  The Employer reserves the right to alter the scope of the works, programme and constraints.  The Clerk of Works of the Employer will do Quality Control Checks and inspections on the works. The Contractor notifies the Clerk of Works or Employer’s Representative of any inspections to be done three days in advance.  The Contractor shall ensure that caution is exercised when working in close proximity of live electrical equipment.

Examples of Quality Assurance Requirements in a sentence

  • Mental Health Organizations (MHOs) shall abide by the Quality Assurance Requirements as stated in the MHO Agreement.

  • Additional guidance may be found in ASME NQA-1-2008, w/ 2009 Addenda, Quality Assurance Requirements for Nuclear Facility Applications, Subpart 2.2, Quality Assurance Requirements for Packaging, Shipping, Receiving, Storage, and Handling of Items for Nuclear Power Plants.

  • Operate and maintain your PM CEMS according to the procedures and requirements in Procedure 2— Quality Assurance Requirements for Particulate Matter Continuous Emission Monitoring Systems at Stationary Sources in Appendix F to part 60 of this chapter.

  • The Permittee must develop a Quality Assurance Project Plan (QAPP), or revise an existing QAPP, as required by Part 6.2.6 (Quality Assurance Requirements) to clearly identify all methods and protocols to be used in the wet weather sampling effort.

  • EM requires that American Society of Mechanical Engineers (ASME) NQA‐1‐2008, Quality Assurance Requirements for Nuclear Facility Applications, and addenda through 2009 be implemented as part of the Contractor's QA Program for work affecting nuclear safety.

  • Quality Assurance Requirements for Nuclear Facility Applications.

  • QUALITY ASSURANCE Contractor’s In-Plant Quality Assurance Requirements Quality Assurance Organization Organization EstablishmentThe Contractor shall establish and maintain an effective in-plant quality assurance organization.

  • Additionally, nonreactor nuclear facilities (as defined in 10 CFR 830, Nuclear Safety Management, Section 830.3, Definitions) must be compliant with 10 CFR 830, Nuclear Safety Management, Subpart A, Quality Assurance Requirements.

  • Hanford Analytical Services Quality Assurance Requirements Documents.

  • Appendix A -- Quality Assurance Requirements for SLAMS, SPMs and PSD Air Monitoring.


More Definitions of Quality Assurance Requirements

Quality Assurance Requirements. Quality Assurance Requirements shall mean all analytical, composition, Manufacturing, testing, purity, stability, Packaging, labeling, and recordkeeping requirements and standards pertaining to APIs, Finished Products and Packaged Products, as applicable, arising under applicable NDAs (or equivalents thereof throughout the world), Laws, regulations promulgated by Regulatory Authorities, including, without limitation, cGMP, cGLP, and all applicable industrial standards, including, without limitation, ICH guidelines.
Quality Assurance Requirements mean InterMune's quality assurance requirements as set forth in EXHIBIT 10, as may be amended from time to time by written agreement of the Parties.
Quality Assurance Requirements means the quality requirements for the manufacture of Product and Spare Parts set forth in Exhibit C hereto.

Related to Quality Assurance Requirements

  • Quality Assurance means a systematic procedure for assessing the effectiveness, efficiency, and appropriateness of services.

  • Quality Assurance Program means the overall quality program and associated activities including the Department’s Quality Assurance, Design-Builder Quality Control, the Contract’s quality requirements for design and construction to assure compliance with Department Specifications and procedures.

  • Quality Assurance Plan means a plan approved by the board for ongoing monitoring, measuring, evaluating, and, if necessary, improving the performance of a pharmacy function or system.

  • Insurance Requirements means, collectively, all provisions of the Insurance Policies, all requirements of the issuer of any of the Insurance Policies and all orders, rules, regulations and any other requirements of the National Board of Fire Underwriters (or any other body exercising similar functions) binding upon each Loan Party which is an owner of Mortgaged Property and applicable to the Mortgaged Property or any use or condition thereof.

  • health and safety specification means a site, activity or project specific document prepared by the client pertaining to all health and safety requirements related to construction work;

  • Performance Requirements means (i) with respect to a Segment or the System, the applicable System Performance Requirements set forth or to be developed by mutual agreement pursuant to the System Performance and Availability section of the Technical Volume, (ii) with respect to any System Upgrade, the applicable System Performance Requirements set forth in or to be developed by mutual agreement pursuant to the Technical Volume or (iii) in each case, such other Segment, System or System Upgrade performance levels as mutually agreed by the Parties.

  • Project Requirements means the statement included in the Request for Proposal detailing the technical and other requirements of Canada which are to be met by the successful Bidder, and which are to be addressed in the Bid;

  • Web Site Accessibility Standards/Specifications means standards contained in Title 1 Texas Administrative Code Chapter 206.

  • Environmental and Social Management Framework and “ESMF” means the Recipient’s framework dated November 30, 2010, which: (i) sets forth standards, methods and procedures specifying how technological research activities under the Project whose location, number and scale are presently unknown shall systematically address environmental and social issues in the screening and categorization, sitting, design, implementation and monitoring phases during Project implementation; (ii) systematizes the environmental and social impact assessment required for such activities before Project execution; and (iii) stipulates the procedures for conducting site-specific environmental impact assessments, be they limited environmental impact assessments or full environmental impact assessment.

  • Environmental and Safety Requirements means all federal, state, local and foreign statutes, regulations, ordinances, codes and other provisions having the force and effect of law, all judicial and administrative orders and determinations, all contractual obligations and all common law concerning public health and safety, worker health and safety, and pollution or protection of the environment, including all those relating to the presence, use, production, generation, handling, transportation, treatment, storage, disposal, distribution, labeling, testing, processing, discharge, release, threatened release, control or cleanup of, or exposure to, any hazardous materials, substances or wastes, chemical substances or mixtures, pesticides, pollutants, contaminants, toxic chemicals, petroleum products or byproducts, asbestos, polychlorinated biphenyls, noise or radiation, as previously, now or hereafter in effect.

  • Program Requirements means that the Partner has to fulfill certain minimum program entry requirements as well as ongoing program requirements, some of which are general PartnerEdge requirements, some of which are specific for the “Run Engagement”, including, without limitation payment of the Program Fee(s), meeting certain minimum annual revenue requirements, upholding a Run Authorization for at least one Product Family available for the “Run Engagement” and other requirements as set out in detail in the PartnerEdge Program Guide and the RSPI.

  • OHS Requirements means all Laws applicable to the Supply and related to occupational health or safety, and all of the City Policies that relate to occupational health or safety, and includes without limitation the WCA;

  • Web Site Accessibility Standards/Specifications means standards contained in Title 1 Texas Administrative Code Chapter 206.

  • Technical Requirements means the Technical Requirements in Section VII of the tendering documents.

  • Environmental and Social Standards means, collectively: (i) “Environmental and Social Standard 1: Assessment and Management of Environmental and Social Risks and Impacts”; (ii) “Environmental and Social Standard 2: Labor and Working Conditions”; (iii) “Environmental and Social Standard 3: Resource Efficiency and Pollution Prevention and Management”; (iv) “Environmental and Social Standard 4: Community Health and Safety”; (v) “Environmental and Social Standard 5: Land Acquisition, Restrictions on Land Use and Involuntary Resettlement”; (vi) “Environmental and Social Standard 6: Biodiversity Conservation and Sustainable Management of Living Natural Resources”;

  • PJM Reliability Assurance Agreement means the Reliability Assurance Agreement among Load Serving Entities in the PJM Region on file with the Commission.

  • Applicable Technical Requirements and Standards means those certain technical requirements and standards applicable to interconnections of generation and/or transmission facilities with the facilities of an Interconnected Transmission Owner or, as the case may be and to the extent applicable, of an Electric Distributor, as published by Transmission Provider in a PJM Manual provided, however, that, with respect to any generation facilities with maximum generating capacity of 2 MW or less (synchronous) or 5 MW or less (inverter-based) for which the Interconnection Customer executes a Construction Service Agreement or Interconnection Service Agreement on or after March 19, 2005, “Applicable Technical Requirements and Standards” shall refer to the “PJM Small Generator Interconnection Applicable Technical Requirements and Standards.” All Applicable Technical Requirements and Standards shall be publicly available through postings on Transmission Provider’s internet website.

  • Compliance Review as defined in Section 5.5(b).

  • Environmental and Social Management Plan means the Recipient’s document prepared in accordance with the Environmental and Social Management Framework with respect to an activity, that details: (i) the measures to be taken during the implementation and operation of the activity to eliminate or offset adverse environmental or social impacts, or to reduce them to acceptable levels, and (ii) the actions needed to implement these measures.

  • Applicable Requirements means all applicable federal, state and local laws, regulations, rules, ordinances, codes, decrees, judgments, directives, or judicial or administrative orders, permits, licenses, authorizations, approvals and other duly authorized actions of any federal, state, local or other governmental regulatory or administrative agency, court, commission, department, board, or other governmental subdivision, legislature, rulemaking board, tribunal, or other governmental authority having jurisdiction, NYISO, NYSRC and NPCC requirements, and any applicable reliability standards.

  • Commissioning Tests means the tests performed (including any repetition thereof) during the commissioning phase, including those set forth in Section 3 of this Attachment S, to demonstrate that the applicable Equipment or system is ready for use to receive Natural Gas and produce LNG for Performance Tests.

  • Specifications and Standards means the specifications and standards relating to the quality, quantity, capacity and other requirements for the Work, and any modifications thereof, or additions thereto, as included in the design and engineering for the Work executed by the Successful Bidder to, and expressly approved by, the BSCL;

  • End Client Requirements means the specific requirements of the End Client, as notified to the Supplier in writing;

  • Quality system means a structured and documented management system describing the policies, objectives, principles, organizational authority, responsibilities, accountability, and implementation plan of an organization for ensuring quality in its work processes, products (items), and services. The quality system provides the framework for planning, implementing, and assessing work performed by the organization and for carrying out required quality assurance and quality control.

  • major non-compliance outcome notification means a notification received by a council under section 19N(3) or (4) of the Food Act 1984, or advice given to council by an authorized officer under that Act, of a deficiency that does not pose an immediate serious threat to public health but may do so if no remedial action is taken

  • Radiopharmaceutical quality assurance means, but is not limited to, the performance of appropriate chemical, biological, and physical tests on potential radiopharmaceuticals and the interpretation of the resulting data to determine their suitability for use in humans and animals, including internal test assessment, authentication of product history, and the keeping of proper records.