Definition of Service. Fast Post‐Fault Active Power Recovery is the recovery of a Providing Unit’s MW Output to at least 90% of its pre‐Fault Disturbance MW Output within 250ms of the voltage at the Providing Unit’s Connection Point recovering to at least 90% of its pre‐Fault Disturbance value for any Fault Disturbance that is cleared within 900ms. The Providing Unit must be exporting Active Power to the Power System and must remain connected to the Power System for at least 15 minutes following the Fault Disturbance.
Definition of Service. Ramping Margin means the following services: Ramping Margin 1, Ramping Margin 3 and Ramping Margin 8. Each of these services is covered in turn below: Ramping Margin 1 Ramping Margin 1 is the increased MW Output and/or MW Reduction that a Providing Unit can provide to the Company within one hour of the Company issuing a Dispatch Instruction to a Service Provider and that the Providing Unit can maintain for a further two hours after the one hour period has elapsed. It is limited by the lowest Availability in that three hour period. Ramping Margin 3 Ramping Margin 3 is the increased MW Output and/or MW Reduction that a Providing Unit can provide to the Company within three hours of the Company issuing a Dispatch Instruction to a Service Provider and that the Providing Unit can maintain for a further five hours after the three hour period has elapsed. It is limited by the lowest Availability in that eight hour period. Ramping Margin 8 Ramping Margin 8 is the increased MW Output and/or MW Reduction that a Providing Unit can provide to the Company within eight hours of the Company issuing a Dispatch Instruction to a Service Provider and that the Providing Unit can maintain for a further eight hours after the eight hour period has elapsed. It is limited by the lowest Availability in that sixteen hour period.
Definition of Service. Dynamic Reactive Response (DRR) is the ability of a Providing Unit connected to the Power System to deliver Reactive Current for Voltage Dips in excess of 30% of the Nominal Voltage at the Connection Point. The volume of Reactive Current required is that which would achieve at least a Reactive Power in Mvar at Nominal Voltage at the Connection Point equivalent in magnitude to 31% of the Registered Capacity of the Providing Unit. The Reactive Current shall be supplied with a Rise Time no greater than 40 ms and a Settling Time no greater than 300 ms.
Definition of Service. For purposes of determining the vesting of your Options, you will be deemed to be in the service of your Employer for so long as you serve in any capacity as a common-law employee, non-employee director or consultant of your Employer.
Definition of Service. The Bank’s ACH Fraud Prevention Services offer Customer a selection of fraud prevention measures that may be selected by Customer to protect Customer’s Accounts from unauthorized ACH debits and credit. Customer may customize a solution to control the posting of ACH transactions to Customer’s demand deposit account(s) with Bank as an integral part of Customer’s process for validating that ACH transactions are authorized and serve a valid business purpose of the Customer. As used herein, "ACH transaction(s)" shall refer to electronic funds transfers that settle within a bank or between banks according to specified rules and procedures governed by the Federal Reserve Bank and the NACHA. "Debit Entry" shall refer to any ACH Transaction which has the intended result of removing funds from the Customer's demand deposit account(s). "Credit Entry" shall refer to any ACH Transaction which has the intended effect of depositing funds to the Customer's demand deposit account(s). Customer may enroll in one or more of the following ACH Fraud Prevention Services described below (each a “Service”).
Definition of Service. For purposes of determining the vesting for the Service Vesting Condition on the Vesting Date, you will be deemed to be in the service of the Company, Sterling National Bank and/or any of their subsidiaries for so long as you serve in any capacity as an employee, officer, non-employee director or consultant of the Company, Sterling National Bank and/or any of their subsidiaries.
Definition of Service. 20.07 Unless otherwise specified, whenever the term “service” is used within this Collective Agreement, it shall be defined as all time paid with the City.
Definition of Service. An employee's Service will begin with the first day of employment and shall be the cumulative amount of time which the employee has worked for the Employer. All service shall be stated in equivalent of years of service to two (2) decimal places (i.e. 6.18 years; 11.23 years, etc.) prorated on the following basis: A year of service for an employee working 38 3/4 hours per week shall be 2015 hours; All time paid by the Employer including the first six (6) months of paid sick time shall be treated as time worked for the purpose of this Clause. In the case of an employee who is off work as a result of sickness or injury and who does not qualify for or receive paid sick leave for said sickness or injury but does receive Manitoba Workers Compensation benefits for the said sickness or injury, the first six (6) months of receipt of compensation benefits shall be treated as time worked for the purpose of this Clause. If the employee, prior to the commencement of time off work due to the sickness or injury, worked less than the full-time hours of work, service shall be prorated on the basis of the number of hours worked in the last full week worked. No employee may, by reasons of working extra hours, receive credit for more than one (1) year of service during a one (1) year period.
Definition of Service. Services to be provided to University for the purposes stated in the Exhibit A only, attached and incorporated herein. Additional work will be performed only if authorized in advance by written amendment to this agreement executed by both parties.
Definition of Service. Fast Frequency Response (FFR) is the additional MW Output or MW Reduction required compared to the pre-incident MW Output or MW Reduction, which is fully available from a Providing Unit within 2 seconds after the start of an Event and sustainable up to 10 seconds after the start of the Event. The extra energy provided in the 2 to 10 second timeframe must be greater than any loss of energy in the 10 to 20 second timeframe due to a reduction in MW Output or MW Reduction below the pre-incident MW Output or MW Reduction.
