Field Engineer Sample Clauses

Field Engineer. CADD/BIM/GIS Administrator • CADD/BIM/GIS Manager • CADD/BIM/GIS Specialist • Design Engineer • Design QA/QC Manager (CA PE) • Design QA/QC Specialist • Field Engineer • Graphics/Design Visualization Specialist • Resident Engineer (CA PE) • Senior Design Engineer (CA PE) • Technical Writer – Engineering Duties and responsibilities within the Field Engineer job category include, but are not limited to: Provide oversight for construction activity phase of the project as identified by the contract documents; oversee the construction phase of the work, and communicate with the project administrator and/or COUNTY assigned Project Manager , to ensure that contractual obligations are satisfied and conditions are met for JWA requirements, based on contract documents; collaborate and communicate with the project administrator and/or COUNTY assigned Project Manager, A-E, and Construction Manager, as requested by JWA, in performing analysis of contract documents, bids and/or estimates, schedule requirements. Critical Path Method (CPM) Schedules, milestone schedules, and budget parameters; review submittals and drawings, changes in design, change estimates, contractor's daily reports, and schedules for JWA compliance as requested by JWA, and in accordance with the contract documents; communicating all project related matters with the ADMINISTRATOR, Project Manager, A-E, and Construction Manager, contractors, JWA Inspectors, and other stakeholders as defined in General Conditions of the contract, and specified under duties, responsibilities and communication clause of the contract or as requested by JWA; inspect and document the construction phase activities daily, via a project log or diary (not to be supplemented for JWA Inspections); review the Project Quality Control Plan and ensure all Inspection and Testing procedures are being followed and documented and communicated properly; inspect the construction work, document and track all non-conformance construction issues, communicate with the PM as requested by JWA (not to be supplemented for JWA Inspections); review, substantiate, and comment on invoices, change orders, and back-charges for consideration by direct reports; and other Field Engineer - related duties and responsibilities as assigned by the Facilities Development Division Deputy Airport Director and/or Airport Engineering Section Manager.
Sample 1Sample 2Sample 3See All (4)
AutoNDA by SimpleDocs
Field Engineer. Field Engineer shall be defined as a qualified City Engineer or the City’s qualified consultant. Qualified Engineers include: ▪ Xxxxx Xxxxxxx – The City of Oklahoma City ▪ Xxxxx Xxxxxxx – The City of Oklahoma City ▪ Don Steel – Xxxx Engineering
Sample 1
Field Engineer. Mobility hub construction oversight including walls, pedestrian concrete box culvert, electric vehicle charging stations, underdrains, traffic control, temporary drainage, cost estimating, constructability design, stakeholder coordination, quantity tracking, and daily diaries. Site supervisory audits, weekly, safety- critical construction plans for bridge demolitions and girder erections. Participated in plan constructability reviews and major change orders, tracking Education of weekly labor and bid item quantities. Developed look-ahead schedules, BS, Integrated Biology University of Colorado at Denver AS, General Science Casper College, Casper, WY assisted internal design engineers with bridge overhang design, girder erection and demolition plans, field design changes, requests for information, submittals, and transmittals. Conducted project aerial photography and developed the drone program within Xxxxxxx. Supported all crews associated with assigned structures, providing guidance, scheduling, financial management, productivity, and all other applicable construction logistics. Managed environmental requirements.
Sample 1
Field Engineer. Oversaw all environmental aspects of this CDOT CMGC project on behalf of Xxxxxxx North America, including stormwater compliance, biological resources, prairie dog management, historical and archaeological surveys, contractor environmental management, and fulfilling all permit requirements. 0000 00xx Xxxxxx Xxxxxxxx Xx0 CM Services | City of Evans, Colorado | March 17, 2022 7 Xxxxxx Xxxxxx | Construction Document Specialist | UDOT CEMT Certified Role: Xxxxxx will be the sole source for all documentation to flow through, which promotes project file organization, makes team members accountable, and provides rapid project closeouts that will help ensure funding continuity. She works directly with CDOT’s Local Agency coordinator on all CDOT requirements and is very adept at LCP tracker and B2G. Xxxxxx will continuously work with the Contractor throughout the project to help ensure their compliance. She manages the pay estimate spreadsheet, enters quantities, and distributes it for signatures and final processing. She also assists Xxxx to ensure the project’s documentation needs list is current and that no estimate is approved until all 9 Years' Experience necessary documentation requirements are met. Construction Document Specialist J-U-B ENGINEERS, Inc. 2016 – Present Benefit to the City: Personnel Xxxxxx is highly versed in federal aid documentation gained through more than 50 projects over the past nine years. She has well-established working relationships with Region 4’s Local Agency coordinator and their Civil Rights staff. The ultimate benefit of having Xxxxxx as part of our team is that we can Education all sleep better knowing the pay estimates are handled with no mistakes every Medical Assistant, Bryman School month, documentation is in place before payments, and project closeout was started on day one. This leads us to meeting the City's success goal of "Comes in under budget." Similar Project Experience: • 71st Street Shoulders/Multi-use Path, Boulder County/CDOT/City of Boulder • North 83rd Street Bridge over Little Xxxxxxxx River – Boulder County • East County Line Road/Weld County Road 1 Bridge over Saint Vrain Creek – Boulder County/CDOT • Xxxxx Middle School Safe Routes to School – Boulder County/CDOT • Xxxxxxxx Fork Trail Multi-Modal Sidewalk – Boulder County/CDOT • East County Line Road Bridge over Boulder Creek – Boulder County/CDOT • Old Saint Vrain Road Bridge over South Saint Vrain Creek – Boulder County • Xxxxx Xxxxxx Xxxx Xxxx Xxxxxx Xxx...
Sample 1
Field Engineer 
Sample 1

Related to Field Engineer

  • Geotechnical Engineer « »« » « » « » « » « »

  • Independent Engineer Contractor shall cooperate with Independent Engineer in the conduct of his or her duties in relation to the Project and the Work, including the duties listed in Attachment CC. No review, approval or disapproval by Independent Engineer shall serve to reduce or limit the liability of Contractor to Owner under this Agreement.

  • Reverse Engineering The Customer must not reverse assemble or reverse compile or directly or indirectly allow or cause a third party to reverse assemble or reverse compile the whole or any part of the software or any products supplied as a part of the Licensed System.

  • Architect/Engineer (A/E) means a person registered as an architect pursuant to Tex. Occ. Code Xxx., Chapter 1051, as a landscape architect pursuant to Tex. Occ. Code Xxx., Chapter 1052, a person licensed as a professional engineer pursuant to Tex. Occ. Code Xxx., Chapter 1001 and/or a firm employed by Owner or a design-build contractor to provide professional architectural or engineering services and to exercise overall responsibility for the design of a Project or a significant portion thereof, and to perform the contract administration responsibilities set forth in the Contract.

  • Project Engineer If the Project has been designed by the Project Engineer, the Project Engineer is to act as the Owner's representative, assumes all duties and responsibilities, and has the rights and authority assigned to Project Engineer in the Contract Documents in connection with completion of the Work all in accordance with the Contract Documents.

  • Engineer The individual or entity named as such in this Agreement.

  • Value Engineering The Supplier may prepare, at its own cost, a value engineering proposal at any time during the performance of the contract. The value engineering proposal shall, at a minimum, include the following;

  • No Reverse Engineering You may not, and you agree not to or enable others to, copy (except as expressly permitted by this License or by the Usage Rules if they are applicable to you), decompile, reverse engineer, disassemble, attempt to derive the source code of, decrypt, modify, or create derivative works of the Apple Software or any services provided by the Apple Software, or any part thereof (except as and only to the extent any foregoing restriction is prohibited by applicable law or to the extent as may be permitted by the licensing terms governing use of open-sourced components included with the Apple Software).

  • Engineering Forest Service completed survey and design for Specified Roads prior to timber sale advertisement, unless otherwise shown in A8 or Purchaser survey and design are specified in A7. On those roads for which Forest Service completes the design during the contract, the design quantities shall be used as the basis for revising estimated costs stated in the Schedule of Items and adjusting Timber Sale Account. Forest Service engineering shall be completed according to the schedule in A8. Should Forest Service be unable to perform the designated survey and design by the completion date or other agreed to time, upon written agreement, Purchaser shall assume responsibility for such work. In such event, Contracting Officer shall revise:

  • Engineering Report Lender shall have received a current Engineering Report with respect to the Property, which report shall be in form and substance reasonably satisfactory to Lender.

Time is Money Join Law Insider Premium to draft better contracts faster.