Self Installation definition

Self Installation means you install the Services. In locations where Self-Installation is available, Company will ship the Equipment and instructions necessary for you to initiate Services. You will install Equipment according to Company-provided instructions. Company will provide customer service representatives to assist you with installation via a local or toll-free number. If you require that Company install the necessary Equipment and Software for Services at your location, you may be billed separately for those installation services.
Sample 1Sample 2Sample 3
Self Installation means the DSL Services are installed by Customer. If Self-Installation is available, Sprint will ship the equipment, software, and instructions necessary for Customer to initiate DSL Services. Customer, or its employees or personnel, will be responsible for installing Equipment and software according to Sprint-provided instructions. Sprint will provide customer service representatives to assist Customer with installation questions and procedures via a local or toll-free number. If Customer requires that Sprint install the necessary equipment and software for DSL Services at a particular Customer Premise, Customer will be billed separately for installation services. The provisions of Section 1.4 will not apply if Self-Installation is available to Customer.
Sample 1Sample 2
Self Installation means that the End User is responsible for performing all installation activities at the End User's premises. DVSA will ship the equipment in a Self-Install Kit to the End User. DVSA offers telephone based technical support to assist the End User with the installation. The Self Installation Service is considered complete and billing will begin upon the earlier to occur of the following: (a) when DVSA can verify that the End User Circuit passes traffic or (b) (i) DVSA has provisioned the network elements under its control, (ii) at least five (5) calendar days have elapsed since the shipment of the Self Install Kit. Either (a) or (b), whichever occurs first, is referred to as the “Billing Start Date”. DVSA does not guarantee that every request for a Self-Installation will be able to be completed by the End User without onsite assistance. If End User requests a DVSA Professional Installation after attempting a Self Installation, DVSA may, at its discretion, offer on-site assistance as an additional service for the fee set forth below without obtaining authorization from Customer, and Customer agrees to pay the fees for such assistance, including, without limitation, fees for Missed Appointments as specified below. Once DVSA begins billing Customer for an End User, DVSA will continue billing unless Customer requests a disconnection of the End User Circuit. If the Customer requests a disconnection for such End User within thirty (30) calendar days of the Billing Start Date, DVSA will disconnect the End User Circuit without a disconnection fee and provide Customer a credit with respect to such End User equal to the fees billed up to the date of disconnection, except for fees for Professional Installation (including fees for Missed Appointments) and CPE that has not been returned to DVSA pursuant to the Return Materials Authorization (“RMA”) instructions below within sixty (60) days of the disconnection date. DVSA will only issue a credit for CPE after DVSA receives the CPE pursuant to the RMA procedures below within sixty (60) days of the disconnection date.
Sample 1Sample 2

Examples of Self Installation in a sentence

  • You may thereafter install and complete the Road Runner Self Installation according to those terms.

  • Self Pick-up and Self Installation of an Air Conditioning Unit (Code H) 10 8.

  • RIVERA, M.D.Eye Physician & Surgeon Comprehensive Eye care for the Entire Family Glasses, Contacts, Cataracts, Laser Surgery Glaucoma, Macular Degeneration, Diabetes Medical Alert System$29.95/Mo. billed quarterly• One Free Month • No Long-Term Contract • Price Guarantee • Easy Self Installation Call Today! Toll Free 1.877.801.8608 GAFFNEY - DOLAN FUNERAL HOME Get this weekly bulletin delivered byemail - for FREE!Sign up here:www.jspaluch.com/subscribe Courtesy of J.S. Paluch Company, Inc.Edward J.

  • Bay Shore951-4063045200 St Anne Church (B) www.jspaluch.com • Price Guarantee • Easy Self Installation Call Today!Toll Free 1.877.801.8608For Ads: J.S. Paluch Co., Inc.

  • Medical Alert System$29.95/Mo. billed quarterly• One Free MonthCall Today!Toll Free 1.877.801.8608• No Long-Term Contract• Price Guarantee• Easy Self Installation Get this weekly bulletin delivered by email - for FREE!Sign up here: www.jspaluch.com/subscribe Courtesy of J.S. Paluch Company, Inc.

  • In the event the Customer does not return the faulty equipment, Covad will charge Customer the current standard price for a replacement Self Installation Kit.After expiration of the one-year limited warranty period, Covad will replace such out-of- warranty CPE, provided, however, that Customer will be responsible for the standard charge for the CPE and the technician visit (if applicable).

  • BROADBAND ACCESS INTERNET POLICIES Only Covad technicians may complete delivery of a Customer Circuit (except in the case of Self Installation Services).

  • This applies to all Business DSL Plus, Ethernet, T1 Internet Services, as well as Business DSL, Standard DSL or Lineshare ADSL Professional Installation Services, but does not apply to Self Installation Services until such time that any of the Services rendered under Professional Installation are needed or specifically requested by Customer (e.g., NID splitter installation is required).

  • The alterations proposed would not affect the integrity of the building and are considered acceptable in terms of design and appearance.

  • Self Installation chargepointsIf you have bought a charge point directly from us without installation included, you are responsible for installing it.

Related to Self Installation

  • Type 3 Installation means any Technical Installation upon which none of the SW, or only a portion of the SW, deployed is licensed for Use with such TPD, and therefore a TPD is not deployed or running.

  • Type 1 Installation means any Technical Installation upon which all SW deployed is licensed for Use with, and is running on, such TPD;

  • Type 2 Installation means any Technical Installation upon which all SW deployed is licensed for Use with, but is not running on, such TPD; and,

  • Existing installation means an installation, construction of which began prior to the effective date of any regulation having application to it.

  • New installation means an installation, construction of which began after the effective date of any regulation having application to it.

  • Utility Installations is used in this Lease to refer to all air lines, power panels, electrical distribution, security, fire protection systems, communications systems, lighting fixtures, heating, ventilating and air conditioning equipment, plumbing, and fencing in, on or about the Premises. The term "TRADE FIXTURES" shall mean Lessee's machinery and equipment which can be removed without doing material damage to the Premises. The term "ALTERATIONS" shall mean any modification of the improvements on the Premises which are provided by Lessor under the terms of this Lease, other than Utility Installations or Trade Fixtures. "LESSEE-OWNED ALTERATIONS AND/OR UTILITY INSTALLATIONS" are defined as Alterations and/or Utility Installations made by Lessee that are not yet owned by Lessor pursuant to Paragraph 7.4(a). Lessee shall not make nor cause to be made any Alterations or Utility Installations in, on, under or about the Premises without Lessor's prior written consent. Lessee may, however, make non-structural Utility Installations to the interior of the Premises (excluding the roof) without Lessor's consent but upon notice to Lessor, so long as they are not visible from the outside of the Premises, do not involve puncturing, relocating or removing the roof or any existing walls, or changing or interfering with the fire sprinkler or fire detection systems and the cumulative cost thereof during the term of this Lease as extended does not exceed $2,500.00.

  • Utility Installation means carpeting, window coverings, air lines, power panels, electrical distribution systems, lighting fixtures, space heaters, air conditioning, plumbing, and fencing. Lessor may require that Lessee remove any or all of said alterations, improvements, additions or Utility Installations at the expiration of the term, and restore the Premises to their prior condition. Lessor may require Lessee to provide Lessor, at Lessee's sole cost and expense, a lien and completion bond in an amount equal to one and one-half times the estimated cost of such improvements, to insure Lessor against any liability for mechanic's and materialmen's liens and to insure completion of the work. Should Lessee make any alterations, improvements, additions or Utility Installations without the prior approval of Lessor, Lessor may require that Lessee remove any or all of the same.

  • Removable Installations means any items listed on Exhibit F attached hereto and any items agreed by Landlord in writing to be included on Exhibit F in the future, (y) “Tenant’s Property” means Removable Installations and, other than Installations, any personal property or equipment of Tenant that may be removed without material damage to the Premises, and (z) “Installations” means all property of any kind paid for by Landlord, all Alterations, all fixtures, and all partitions, hardware, built-in machinery, built-in casework and cabinets and other similar additions, equipment, property and improvements built into the Premises so as to become an integral part of the Premises, including, without limitation, fume hoods which penetrate the roof or plenum area, built-in cold rooms, built-in warm rooms, walk-in cold rooms, walk-in warm rooms, deionized water systems, glass washing equipment, autoclaves, chillers, built-in plumbing, electrical and mechanical equipment and systems, and any power generator and transfer switch.

  • electrical installation means an electrical installation as defined in the Regulations;

  • Standard Installation means the installation of drop cable to a customer’s premise where the distance from the point of entry into the building being served is less than 150 feet from the active cable television system plant.

  • drainage installation means a system situated on any premises and vested in the owner thereof and is used for or intended to be used for or in connection with the reception, storage, treatment or conveyance of sewage on that premises to the connecting point and includes drains, fittings, appliances, septic tanks, conservancy tanks, pit latrines and private pumping installations forming part of or ancillary to such systems;

  • water installation means the pipes and water fittings which are situated on any premises and ownership thereof vests in the owner thereof and used or intended to be used in connection with the use of water on such premises, and includes a pipe and water fitting situated outside the boundary of the premises, which either connects to the connection pipe relating to such premises or is otherwise laid with the permission of the municipality;

  • Nuclear installation means any installation of such class or description as may be prescribed by regulations made by the relevant Secretary of State from time to time by statutory instrument, being an installation designed or adapted for:

  • meter installation means the meter and, if so equipped, the instrument transformers, wiring, test links, fuses, lamps, loss of potential alarms, meters, data recorders, telecommunication equipment and spin-off data facilities installed to measure power past a meter point, provide remote access to the metered data and monitor the condition of the installed equipment;

  • offshore installation means any installation which is intended for underwater exploitation of mineral resources or exploration with a view to such exploitation;

  • Permitted Installation means the activities and the limits to those activities described in Table 1.1.1 of this Permit.

  • Customer’s Installation means an Electrical Installation and includes Distributed Generation, if Distributed Generation is connected to a Customer's Installation; "Customer’s Premises" means the land and buildings owned or occupied by a Customer, and any land over which the Customer has an easement or right to pass electricity, including:

  • Internal Installation or “Internally Install” means installing into production Client Applications and/or Server Applications on one or more computers within Licensee’s company or organization only in connection with Licensee’s internal business purposes.

  • Permanent radiographic installation means an enclosed shielded room, cell, or vault, not located at a temporary jobsite, in which radiography is performed.

  • Military installation means: a base, camp, post, station, yard, center, homeport facility for any ship, or other activity under the jurisdiction of the Department of Defense, including any leased facility, which is located within any of the several States, the District of Columbia, the Commonwealth of Puerto Rico, the U.S. Virgin Islands, Guam, American Samoa, the Northern Marianas Islands and any other U.S. Territory. Such term does not include any facility used primarily for civil works, rivers and harbors projects, or flood control projects.

  • Installation Site means the site at which the Product is originally installed.

  • Building, structure, facility, or installation means all of the pollutant-emitting activities which belong to the same industrial grouping, are located on one or more contiguous or adjacent properties, and are under the control of the same person (or persons under common control) except the activities of any vessel. Pollutant-emitting activities shall be considered as part of the same industrial grouping if they belong to the same major group (i.e., which have the same two-digit code) as described in the Standard Industrial Classification Manual, 1972, as amended by the 1977 Supplement (U.S. Government Printing Office stock numbers 4101-0066 and 003-005-00176-0, respectively).

  • Installation means that the System or a Subsystem as specified in the Contract is ready for Commissioning as provided in GCC Clause 26 (Installation).

  • Lending Installation means, with respect to a Lender or the Agent, any office, branch, subsidiary or affiliate of such Lender or the Agent.

  • Installations means all property of any kind paid for by Landlord, all Alterations, all fixtures, and all partitions, hardware, built-in machinery, built-in casework and cabinets and other similar additions, equipment, property and improvements built into the Premises so as to become an integral part of the Premises, including, without limitation, fume hoods which penetrate the roof or plenum area, built-in cold rooms, built-in warm rooms, walk-in cold rooms, walk-in warm rooms, deionized water systems, glass washing equipment, autoclaves, chillers, built-in plumbing, electrical and mechanical equipment and systems, and any power generator and transfer switch.

  • Installation Work means the construction and installation of the System and the Start-up, testing and acceptance (but not the operation and maintenance) thereof; all performed by or for the Power Producer at the Premises.