Utility Installations definition
Utility Installations is used in this Lease to refer to all air lines, power panels, electrical distribution, security, fire protection systems, communications systems, lighting fixtures, heating, ventilating and air conditioning equipment, plumbing, and fencing in, on or about the Premises. The term "TRADE FIXTURES" shall mean Lessee's machinery and equipment which can be removed without doing material damage to the Premises. The term "ALTERATIONS" shall mean any modification of the improvements on the Premises which are provided by Lessor under the terms of this Lease, other than Utility Installations or Trade Fixtures. "LESSEE-OWNED ALTERATIONS AND/OR UTILITY INSTALLATIONS" are defined as Alterations and/or Utility Installations made by Lessee that are not yet owned by Lessor pursuant to Paragraph 7.4(a). Lessee shall not make nor cause to be made any Alterations or Utility Installations in, on, under or about the Premises without Lessor's prior written consent. Lessee may, however, make non-structural Utility Installations to the interior of the Premises (excluding the roof) without Lessor's consent but upon notice to Lessor, so long as they are not visible from the outside of the Premises, do not involve puncturing, relocating or removing the roof or any existing walls, or changing or interfering with the fire sprinkler or fire detection systems and the cumulative cost thereof during the term of this Lease as extended does not exceed $2,500.00.
Utility Installations refers to all floor and window coverings, air lines, power panels, electrical distribution, security and fire protection systems, communication systems, lighting fixtures, HVAC equipment, plumbing, and fencing in or on the Premises. The term "TRADE FIXTURES" shall mean Lessee's machinery and equipment that can be removed without doing material damage to the Premises. The term "ALTERATIONS" shall mean any modification of the improvements, other than Utility Installations or Trade Fixtures, whether by addition or deletion. "LESSEE OWNED ALTERATIONS AND/OR UTILITY INSTALLATIONS" are defined as Alterations and/or Utility Installations made by Lessee that are not yet owned by Lessor pursuant to Paragraph 7.4(a). Lessee shall not make any Alterations or Utility Installations to the Premises without Lessor's prior written consent. Lessee may, however, make non-structural Utility Installations to the interior of the Premises (excluding the roof) without such consent but upon notice to Lessor, as long as they are not visible from the outside, do not involve puncturing, relocating or removing the roof or any existing walls, and the cumulative cost thereof during this Lease as extended does not exceed $50,000 in the aggregate or $10,000 in any one year.
Utility Installations refers to all floor and window coverings, air lines, power panels, electrical distribution, security and fire protection systems, communication systems, lighting fixtures, HVAC equipment, plumbing, and fencing in or on the Premises. The term "Trade Fixtures" shall mean Lessee's machinery and equipment that can be removed without doing material damage to the Premises. The term "Alterations" shall mean any modification of the improvements, other than Utility Installations or Trade Fixtures, whether by addition or deletion. "Lessee Owned Alterations and/or Utility Installations" are defined as Alterations and/or Utility Installations made by Lessee that are not yet owned by Lessor pursuant to Paragraph 7.4(a). Lessee shall not make any Alterations or Utility Installations to the Premises without Lessor's prior written consent. Lessee may, however, make non-structural Utility Installations to the interior of the Premises (excluding the roof) without such consent but upon notice to Lessor, as long as they are not visible from the outside, do not involve puncturing, relocating or removing the roof or any existing walls, and the cumulative cost thereof during this Lease as extended does not exceed $50,000 in the aggregate or $10,000 in any one year.
Examples of Utility Installations in a sentence
Unless otherwise agreed in writing, Landlord may require that any or all Tenant-Owned Alterations or Utility Installations be removed by the expiration or earlier termination of this Lease, notwithstanding that Landlord may have consented to their installation.
Subject to Landlord’s right to require their removal and to cause Tenant to become the owner thereof as hereinafter provided in this Paragraph 6.4, all Alterations and Utility Installations made to the Premises by Tenant shall be the property of and owned by Tenant, but considered a part of the Premises.
Tenant shall pay, prior to delinquency, all taxes assessed against and levied upon Alterations and Utility Installations, Trade Fixtures, furnishings, equipment and all personal property of Tenant contained in the Premises or stored within the Industrial Center.
Tenant shall not make nor cause to be made any Alterations or Utility Installations in, on, under or about the Premises without Landlord’s prior written consent.
Unless otherwise instructed per Subparagraph 6.4 (b) hereof, all Tenant-Owned Alterations and Utility Installations shall, at the expiration or earlier termination of this Lease, automatically and without further action on the part of Landlord, become the property of Landlord and remain upon the Premises and be surrendered with the Premises by ▇▇▇▇▇▇.
More Definitions of Utility Installations
Utility Installations is used in this Lease to refer to all air lines, power panels, electrical distribution, security, fire protections systems, lighting fixtures, heating, ventilating and air conditioning equipment, plumbing, and fencing in, on or about the Premises. The term “Trade Fixtures” shall mean Tenant’s machinery and equipment which can be removed without doing material damage to the Premises. The term “Alterations” shall mean any modification of the improvements on the Premises under the terms of this Lease, other than Utility Installations or Trade Fixtures. “Tenant-Owned Alterations and/or Utility Installations” are defined as Alterations and/or Utility Installations made by Tenant that are not yet owned by Landlord pursuant to Paragraph 7.4(a). Tenant shall not make nor cause to be made any Alterations or Utility Installations in, on, under or about the Premises without Landlord’s prior written consent. Tenant may, however, make non-structural Utility Installations to the interior of the Premises (excluding the roof) without Landlord’s consent but upon notice to Landlord, so long as they are not visible from the outside of the Premises, do not involve puncturing, relocating or removing the roof or any existing walls, or changing or interfering with the fire sprinkler or fire detection systems and the cost thereof does not exceed $25,000.00.
Utility Installations means:
Utility Installations refers to all floor and window coverings, air lines, power panels, electrical distribution, security and fire protection systems, communication systems, lighting fixtures, HVAC equipment, plumbing, and fencing in or on the Premises. The term "Trade Fixtures" shall mean Lessee's machinery and equipment that can be removed without doing material damage to the Premises. The term "Alterations" shall mean any modification of the improvements, other than Utility Installations or Trade Fixtures, whether by addition or deletion. "Lessee Owned Alterations and/or Utility Installations" are defined as Alterations and/or Utility Installations made by Lessee that are not yet owned by Lessor pursuant to Paragraph 7.4(a).
Utility Installations is used in this Lease to refer to all air lines, power panels, electrical distribution, security, fire protection systems, communications systems, lighting fixtures, heating, ventilating and air conditioning equipment, plumbing, and fencing in on or about the Premises. The term "Trade Fixtures" shall mean Lessee's machinery and equipment which can be removed without doing material damage to the Premises. The term "Alterations" shall mean any modification of the improvements on the Premises which are provided by Lessor under the terms of this Lease, other than Utility Installations or Trade Fixtures. "Lessee-Owned Alterations and/or Utility Installations" are defined as Alterations and/or Utility Installations made by Lessee that are not yet owned by Lessor pursuant to Paragraph 7.4(a). Lessee shall not make nor cause to be made any Alterations or Utility Installations in, on, under or about the Premises without Lessor's prior written consent. Lessee may, however, make non-structural Utility Installations to the interior of the Premises (excluding the roof) without Lessor's consent but upon notice to Lessor, so long as they are not visible from the outside of the Premises, do not involve puncturing, relocating or removing the roof or any existing walls, or changing or interfering with the fire sprinkler or fire detection systems and the cumulative cost thereof during the term of this Lease as extended does not exceed $10,000.00. In the event Lessee elects to make additional alterations to the Premises, all the improvements shall be completed by Lessee in a good workmanship manner, and are subject to approval of the City of Simi Valley and Lessor's approval of the final plans and specifications, which shall not be unreasonably withheld or delayed. Lessee, at Lessee's option, shall not be responsible for removing any of the above improvements after the expiration of the lease.
Utility Installations means a building and/or site for use by a utility company maintains to maintain or shelter any equipment used in connection with the utility;
Utility Installations refers to all floor and window coverings, air lines, power panels, electrical distribution, security and fire protection systems, communication systems, antennas and satellite dishes, refrigeration equipment, lighting fixtures, HVAC equipment, plumbing, and fencing in or on the Premises. The term "Trade Fixtures" shall mean Lessee's machinery and equipment that can be removed without doing material damage to the Premises, including but not limited to Lessee's antennas and satellite dishes, and refrigeration equipment. The term "Alterations" shall mean any modification of the improvements, other than Utility Installations or Trade Fixtures, whether by addition or deletion. "Lessee Owned Alterations and/or Utility Installations" are defined as Alterations and/or Utility Installations made by Lessee. Lessee shall not make any Alterations or Utility Installations to the Premises without Lessor's prior written consent. Lessee may, however, make non-structural Alterations and Utility Installations to the interior of the Building (excluding the roof) without such consent but upon notice to Lessor, as long as they are not visible from the outside, do not involve puncturing, relocating or removing the roof or any exterior walls, and the cumulative cost thereof in any year during this Lease as extended does not exceed $50,000.
Utility Installations is used in this Lease to refer to all air lines, power panels, electrical distribution, security, fire protection systems, communications systems, lighting fixtures, heating, ventilating and air conditioning equipment, plumbing, and fencing in, on or about the Premises. The term “Trade Fixtures” shall mean Tenant’s machinery and equipment, which can be removed without doing damage to the Premises. The term “Alterations” shall mean any modification of the improvements on the Premises, which are made by Tenant, with Landlord’s prior written approval, under the terms of this Lease, other than Utility Installations or Trade Fixtures. “Tenant-Owned Alterations and/or Utility Installations” are defined as Alterations and/or Utility Installations made by Tenant that are not yet owned by Landlord pursuant to Subparagraph 6.4 (a). Except in accordance with the Leasehold Improvement Exhibit attached as Exhibit B to this Lease, Tenant shall not make nor cause to be made any Alterations or Utility Installations in, on, under or about the Premises without Landlord’s prior written consent, which consent shall not be unreasonably withheld, conditioned or delayed. If Landlord fails to respond within (10) business days to any request for consent to any Alterations or Utility Installations from Tenant (including the receipt of any plans, if applicable), then Tenant may give to Landlord a second written notice, which written notice must contain the caption “Notice of Deemed Approval of Alterations,” reiterating the request that Landlord approve or disapprove of the Alterations and/or Utility Installations and stating that, if Landlord fails to do so within five (5) business days after the receipt by Landlord of such second notice from Tenant, Landlord shall be deemed to have approved the Alterations and/or Utility Installations. If Landlord fails to approve or disapprove the Alterations and/or Utility Installations within such five (5) business day period, Landlord shall be deemed to have approved the Alterations and/or Utility Installations. The provisions of this Paragraph 6.3 shall not apply to the Leasehold Improvements made by Tenant pursuant to the Leasehold Improvement Exhibit attached as Exhibit B to this Lease.