Conform definition

Conform means to make a person's legal name consistent in all official identity documents by correcting a misspelling, inconsistency, or other error in an official identity document.
Conform means that the Product conforms, in all respects, (a) to the applicable Specifications; (b) was Manufactured in accordance with cGMP and Applicable Law; and (c) is not adulterated or misbranded within the meaning of the Act or within the meaning of any applicable state or municipal law in which the definitions of adulteration and misbranding are substantially the same as those contained in the Act.

Examples of Conform in a sentence

  • Conform to the written promises or affirmations of fact made by the Contractor.

  • Conform to standard spec 203 as modified in this special provision.

  • Conform to reference standard of date of issue current on date of Contract Documents, except where a specific date is established by applicable code.

  • Conform to any limitations or exclusions set forth in these principles or in the Federal award as to types or amount of cost items.

  • Conform to standard spec 460 as modified in this special provision.

  • B.2 Testing(1) Conform to ASTM D2950 and CMM 8.15 for density testing and gauge monitoring methods.

  • Conform to reference standard by date of issue current on date of Contract Documents.

  • Conform to any limitations or exclusions set forth in 2 CFR part 200, subpart E or in the Federal award as to types or amount of cost items.

  • Conform to arrangements indicated by the Contract Documents, recognizing that portions of the Work are shown only in diagrammatic form.

  • Conform to codes and standards as required by the specifications.

More Definitions of Conform

Conform means conform in all respects or with any permitted variation; “motor vehicleincludes a vehicle part;
Conform means “comply with; be in accordance with” (definition 4).
Conform have the same meaning as used in the WCAG 2.0.
Conform or “Conforming” means, with respect to Product, that such Product:
Conform means the Goods and/or Services: (a) conform with (i) the specifications and description of the Goods and/or Services provided pursuant to the Contract; (ii) Good Industry Practice; and (iii) any Applicable Laws, and (b) are (i) free from defects in design, material and workmanship; and (ii) fit for any purpose intended under the Contract. Contract means (as the context may require) the Master Contract and/or an Order. Control means the direct or indirect ownership of more than fifty percent (50%) of voting rights or of the registered capital, and a “Change of Control” is deemed to include any contribution, assignment, merger or other operation which modifies the Control, whether directly or indirectly, of the Party. Controls or Controlled shall be construed accordingly. Customer means Customer Signatory or any of its Affiliates submitting an Order Request for provision of Goods and/or Services. Effective Date for purposes of the Master Contract has the meaning given in Part 1Form of Agreement. Force Majeure means the occurrence of any act, event or circumstance (or any combination of acts, events, or circumstances) which is unforeseeable, insurmountable and outside the reasonable control of the Party which invokes it (taking all reasonable steps to minimise such effects), and which renders such Party unable to comply with (in whole or in part) of its obligations under the Contract. However, Force Majeure shall not include any event or circumstance set out in Clause 19.4(a) of any Party, strikes (except national or regional strikes), lock-outs or other industrial disputes or actions affecting Supplier or its Subcontractors and their respective Personnel, and/or any failure to make any payment due in accordance with the Contract and/or the enactment and/or implementation and/or enforcement of Sanctions Laws / Regulations. Good Industry Practice means any circumstances, practices, methods and procedures and that degree of skill, diligence, prudence and foresight which would reasonably be expected to be observed by a professional, skilled and experienced contractor engaged in carrying out activities the same as, or similar to, those contemplated under the Contract under the same or similar circumstances. Goods means the goods or products (or any part of them) as described in the Contract, and in particular in the Order Request, or any specification for the Goods that is agreed in writing by the Parties. Mandatory Policies means Customer’s policies, includi...

Related to Conform

  • Product Specifications means the quality and other specifications set forth on Appendix 2 to this Agreement.

  • Applicable Laws and Regulations means all duly promulgated applicable federal, State and local laws, regulations, rules, ordinances, codes, decrees, judgments, directives, or judicial or administrative orders, permits and other duly authorized actions of any Governmental Authority having jurisdiction over the relevant parties, their respective facilities, and/or the respective services they provide.

  • Specifications and Standards means the specifications and standards relating to the quality, quantity, capacity and other requirements for the Project, as set forth in Schedule-D, and any modifications thereof, or additions thereto, as included in the design and engineering for the Project submitted by the Developer to, and expressly approved by, the Authority;

  • Standard Specifications means a compilation in book form of specifica- tions approved for general application and repetitive use;

  • District Specifications means the specifications followed by the State Government in the area where the work is to be executed.

  • Contract Specifications means the principal trading terms in CFD (for example Spread, Swaps, Lot Size, Initial Margin, Necessary Margin, Hedged Margin, the minimum level for placing Stop Loss, Take Profit and Limit Orders, financing charges, charges etc) for each type of CFD as determined by the Company from time to time. The Contract Specifications appear on the Website.

  • Codes and Standards means all the applicable codes and standards as indicated in the Technical Specification.

  • TENDER SPECIFICATIONS means the Scope of Work, Special Instructions / Conditions, Technical specifications/requirement , Appendices, Site Information and drawings pertaining to the work and any other relevant reference in the Tender Document for which the Bidder are required to submit their offer.

  • Specifications means the Specifications of the Works included in the Contract and any modification or addition made or approved by the Project Manager.

  • Technical Specifications means the technical specifications set forth in Schedule 1 to the Agreement and to which, the STBs, CAS and SMS must comply with.

  • Fitch Guidelines means the guidelines, as may be amended from time to time, in connection with Fitch’s ratings of the VMTP Shares.

  • Design Guidelines means the Fernkloof Estate architectural design guidelines to control all aspects of design and landscaping of any development within the Fernkloof Estate dev elopment, as amended from time to t ime in terms of the constitution of the MPOA or as required by the Council , a copy of the current draft which i s av ailable for inspection at the offices of the Association;

  • Quality Standards means the quality standards published by BSI British Standards, the National Standards Body of the United Kingdom, the International Organisation for Standardisation or other reputable or equivalent body, (and their successor bodies) that a skilled and experienced operator in the same type of industry or business sector as the Contractor would reasonably and ordinarily be expected to comply with, and as may be further detailed in the Specification.

  • Web Site Accessibility Standards/Specifications means standards contained in Title 1 Texas Administrative Code Chapter 206.

  • technical specification means a document that prescribes technical requirements to be fulfilled by a product, process or service;

  • Requirements means all of the Specifications, requirements and services set out in the RFQ that describes the general requirements that the goods, materials, equipment and services must meet and the Contractor must provide;

  • TENDER SPECIFICATION means “Specific conditions, technical specifications, appendices, site information and drawing pertaining to the work in which the tenderers are required to submit their offer. Individual specification number will be assigned to each tender specification.

  • Program Requirements means that the Partner has to fulfill certain minimum program entry requirements as well as ongoing program requirements, some of which are general PartnerEdge requirements, some of which are specific for the “Run Engagement”, including, without limitation payment of the Program Fee(s), meeting certain minimum annual revenue requirements, upholding a Run Authorization for at least one Product Family available for the “Run Engagement” and other requirements as set out in detail in the PartnerEdge Program Guide and the RSPI.

  • Ordinances means the ordinances of the City of Grimes, Iowa, as embodied in the Code of Ordinances, ordinances not repealed by the ordinance adopting the Code of Ordinances, and those enacted hereafter.

  • Standards means: any standards published by BSI British Standards, the National Standards Body of the United Kingdom, the International Organisation for Standardisation or other reputable or equivalent bodies (and their successor bodies) that a skilled and experienced operator in the same type of industry or business sector as the Supplier would reasonably and ordinarily be expected to comply with; any standards detailed in the specification in framework Schedule 1 (Digital Services) or framework Schedule 6 (Standards and Security); any standards detailed by the Customer in this Contract or as agreed between the Parties from time to time; any relevant Government codes of practice and guidance applicable from time to time.

  • cGMPs means, as applicable, current good manufacturing practices as described in:

  • Applicable Laws means the requirements relating to the administration of equity-based awards under U.S. state corporate laws, U.S. federal and state securities laws, the Code, any stock exchange or quotation system on which the Common Stock is listed or quoted and the applicable laws of any foreign country or jurisdiction where Awards are, or will be, granted under the Plan.