Authorized Channel Responsibilities Sample Clauses

Authorized Channel Responsibilities. Provide all information as requested by Xxxxx to be documented in the Detailed Design Pre-requisite Template to include End User network information five (5) Business Days following receipt of the Pre-requisite Template from Cisco. Provide completed DC detailed design documentation and/or related information to Cisco ten (10) Business Days following commencement of the Services. Define IP addressing for network devices. Provide physical and logical network schematics for existing network where applicable. Provide complete documentation and/or information for the following: completed Data Center prerequisite template; security policy, requirements and features already deployed in the End User’s current network; documentation that defines the current network topology, including access, distribution, and core layers, types of switches and routers in each layer, IP addressing and sub-netting for each layer, and features/services that have been enabled on the network; documentation that defines the existing application flows; Authorized Channel data networking configurations for core routing protocols, LAN/WAN connectivity, QoS and Access Control Lists (ACL). Attend the remote review session(s) in order to review the recommended changes to the Authorized Channel’s detailed design. Network Implementation Plan Review Review of the Authorized Channel created Network Implementation Pan (”NIP”) which may include, providing recommendations (if any) considering End User’s network future growth requirements and Cisco Data Center leading practices. Cisco Responsibilities Provide the DC NIP Pre-requisite Template which specifies the required business and technical requirements that Authorized Channel must gather from End User to enable Cisco to review the NIP provided by the Authorized Channel. Summarize and help the Authorized Channel to validate the End User’s DC NIP requirements using the following inputs: Cisco Data Center leading practices Externally available Data Center Knowledge repositories Participate in up to three (3), two (2) hour, remote review session(s) over a period of up to two (2) consecutive weeks to review with Authorized Channel recommended changes to the Authorized Channel’s DC NIP. The review sessions shall commence within two (2) weeks following receipt by Xxxxx of the DC NIP document. Completion of the remote review session signifies completion of the NIP Review service. Authorized Channel Responsibilities Provide all information as requested by...
Sample 1Sample 2See All (12)
AutoNDA by SimpleDocs
Authorized Channel Responsibilities o Provide all the information as requested by Xxxxx to be documented in the HLD Review Pre-requisite Template to include End User network information five (5) Business Days following receipt of the Pre- requisite Template from Cisco. o Provide completed Authorized Channel‟s HLD document developed based on the End User requirement and related information to Cisco ten (10) Business Days following commencement of the Services. o Attend and participate in the remote review session(s) in order to review Cisco‟s recommended changes to the Authorized Channel‟s HLD.
Sample 1
Authorized Channel Responsibilities. Provide all the information as requested by Cisco to be documented in the DC High Level Design Pre-requisite Template to include End User network information five (5) Business Days following receipt of the Pre-requisite Template from Cisco including: (i) Authorized Channel’s Data Center solution design objectives to Cisco (for example, details concerning scalability, resilience and number of Cisco devices); (ii) Authorized Channel’s security requirements and features planned (for example, load balancing, fabric interconnect, wide area network (WAN) optimization (iv) future growth requirements and network build out time frames. Provide the DC high level design including physical and logical network schematics for the End User’s existing network where applicable to Cisco ten (10) Business Days following commencement of the Services. Provide full details of current network topology, including access, distribution, and core layers, types of switches and routers in each layer, Internet Protocol (IP) addressing and sub-netting for each layer, and features and services that have been enabled on the network. Attend the remote review session(s) in order to review the recommended changes to the Authorized Channel’s DC high level design.
Sample 1
Authorized Channel Responsibilities. Provide all the information as requested by Cisco to be documented in the WLAN Voice High Level Design Pre- requisite Template to include End User network information five (5) Business Days following receipt of the Pre-requisite Template from Cisco including: i) Customer‟s WLAN Voice service design objectives (for example, change management requirement, compliance requirement, type of devices etc.); (ii) End User‟s security requirements; (iii) Voice over WLAN (VoWLAN) requirements; (iv) future growth requirements and build- out time frames. Provide the WLAN Voice high level design including physical and logical network schematics for the End User‟s existing network where applicable to Cisco ten (10) Business Days following commencement of the Services. Provide full details of current network topology, including access, distribution, and core layers, types of switches and routers in each layer, Internet Protocol (IP) addressing and sub-netting for each layer, and features and services that have been enabled on the network. Attend the remote review session(s) in order to review the recommended changes to the Authorized Channel‟s WLAN Voice high level design.
Sample 1
Authorized Channel Responsibilities. Provide all information as requested by Xxxxx to be documented in the WLAN Voice SAT Plan Pre-requisite Template to include End User network information five (5) Business Days following receipt of the Pre-requisite Template from Cisco. Provide completed WLAN Voice SAT Plan and the criteria used by the Authorized Channel in development of the Authorized Channel‟s WLAN Voice SAT plan to Cisco ten
Sample 1
Authorized Channel Responsibilities o Provide all information as requested by Xxxxx to be documented in the NIP Review Pre-requisite Template to include End User network information five (5) Business Days following receipt of the Pre- requisite Template from Cisco. o Provide completed Authorized Channel‟s NIP and related information to Cisco ten (10) Business Days following commencement of the Services. o Authorized Channel to provide the following information to include: a) building layout, including the floor plan, cabling and power location for applicable site; b) interface specifications and requirements, such as cabling standards and specifications for interconnect of Cisco and End User equipment; c) distance and interference limitations of interface cables to be used at installation; d) test plan and any interconnect processes required by third parties including but not limited to in country carrier/telco; and
Sample 1
Authorized Channel Responsibilities.  Update the requirement template with End User’s business and technical requirements and provide it to Cisco before/during the kick-off workshop Remote Configuration Remote configuration of the UCS with on-the-ground support from Authorized Channel Cisco Responsibilities  Remote configuration of Fabric Interconnects  Remote Configuring of UCS to establish Network connectivity  Remote Configuring of UCS to establish storage connectivity  Service profile creation and vLAN remote configuration  Remote Configuration of policies and pools  Performing Power ON Test remotely  Remotely upgrading the firmware  Remote installation of OS/hypervisor – up to 8 blades  Remotely address hardware or software issues such as a blade not booting, chassis not discoverable, BIOS unable to upgrade which might be encountered during the remote configuration/upgrade Authorized Channel Responsibilities  Provide access to End User’s network for remote configuration/upgrade  Provide suitable technical staff and resources during the remote configuration/upgrade by Cisco
Sample 1
AutoNDA by SimpleDocs
Authorized Channel Responsibilities. Provide all the information as requested by Xxxxx to be documented in the High Level Design Pre-requisite Template to include End User network information five (5) Business Days following receipt of the High Level Design Pre-requisite Template from Cisco including: features and services, route plans, addressing schema, call/data flow, dial plans, security policies, network management, operational processes and high-level network architecture design specifications; Unified Communications solution design objectives (for example, details concerning scalability, resilience and number of phones); requirements and features planned (for example, emergency services/E911, Music on Hold, analog phone / fax / modem integration and extension mobility; types of applications impacted by the Network design objectives (for example, voice mail/Unity, Unified Messaging); and future growth requirements and network build out time frames. Provide the high level design including physical and logical network schematics for End User’s existing network where applicable within ten (10) Business Days following commencement of the Services. Attend the remote review session(s) in order to review the recommended changes to the Authorized Channel’s high level design.
Sample 1

Related to Authorized Channel Responsibilities

  • School Responsibilities 1. The School shall have the total responsibility for planning and determining the adequacy of the educational experience of students in theoretical background, basic skill, professional ethics, attitude and behavior, and will assign to the Facility only those students who have satisfactorily completed the prerequisite didactic portion of the School’s curriculum.

  • General Responsibilities Issuer hereby engages Distributor to act as exclusive distributor of the shares of each class of the Funds. The Funds subject to this Agreement as of the date hereof are identified on SCHEDULE A, which may be amended from time to time in accordance with Section 11 below. Sales of a Fund's shares shall be made only to investors residing in those states in which such Fund is registered. After effectiveness of each Fund’s registration statement, Distributor will hold itself available to receive, as agent for the Fund, and will receive by mail, telex, telephone, or such other method as may be agreed upon between Distributor and Issuer, orders for the purchase of Fund shares, and will accept or reject such orders on behalf of the Fund in accordance with the provisions of the applicable Fund’s prospectus. Distributor will be available to transmit orders, as promptly as possible after it accepts such orders, to the Fund’s transfer agent for processing at the shares’ net asset value next determined in accordance with the prospectuses.

  • COUNTY’S RESPONSIBILITIES A. A County program liaison will monitor the submission of all correspondence required in this Agreement, including, but not limited to:

  • Specific Responsibilities In addition to its overall responsibility for monitoring and providing a forum to discuss and coordinate the Parties’ activities under this Agreement, the JSC shall in particular:

  • Additional Responsibilities You agree to: reasonably clean and maintain Covered Items; not harm/damage a Covered Item or Component; provide a safe working environment for Contractors; not damage property of a Contractor; and not threaten/harm us or a Contractor via phone, email, personal interaction, internet, social media or otherwise.

  • CITY’S RESPONSIBILITIES 2.1. The CITY shall designate in writing a project coordinator to act as the CITY's representative with respect to the services to be rendered under this Agreement (the "Project Coordinator"). The Project Coordinator shall have authority to transmit instructions, receive information, interpret and define the CITY's policies and decisions with respect to the CONTRACTOR's services for the Project. However, the Project Coordinator is not authorized to issue any verbal or written orders or instructions to the CONTRACTOR that would have the effect, or be interpreted to have the effect, of modifying or changing in any way whatever:

  • Mutual Responsibilities It is recognized by this Agreement to be the duty of the Company to explain fully the terms of this Agreement to all its officers, foremen and others engaged in a supervisory capacity and it is recognized to be the duty of the Union to explain fully to its members, its and their responsibilities and obligations under this Agreement.

  • Contractor’s General Responsibilities The Contractor, regardless of any delegation or subcontract entered by the Contractor, shall be responsible for the following when providing information technology staff augmentation services:

  • Vendor Responsibilities Note: NO EXCEPTIONS OR REVISIONS WILL BE CONSIDERED IN C-M, O-S, V-W. Indemnification

  • MANAGERIAL RESPONSIBILITIES 7.01 Except to the extent provided herein, this Agreement in no way restricts the Employer in the management and direction of the Public Service.

Time is Money Join Law Insider Premium to draft better contracts faster.