Standards For definition

Standards For. Proper Device Care This document is an important addendum to the Device Use Agreement. You are expected to follow all the specific guidelines listed in this document and take any additional common sense precautions to protect your assigned device. Loss or damage resulting in failure to abide by the details below may result in full- financial responsibility. Your Responsibilities ● Treat this equipment with the utmost care. Electronic equipment can be fragile, so it is important that you be aware of this and be gentle with your device. ● For devices going home, charge the device each night while you sleep. Chargers are to be left at home. Students are responsible for ensuring their device is fully charged and ready to be used for the school day. Students bringing uncharged devices are subject to disciplinary action. ● Keep the device either locked (i.e., locked in your school locker or gym locker, where others do not have access) or with you at all times. Leaving your device unattended in a classroom is not a secure location. Do not leave your device unattended in a classroom. Keep the device stored in a secure place (i.e., locked in you school locker) when you cannot directly monitor it. For example, during passing periods, athletic events, games, practices, and trips, store the device in your school locker. Devices left in bags and backpacks, or in unattended classrooms are considered “unattended” and will be confiscated by school personnel as a protection against theft. Unattended and unlocked equipment, if stolen (even at school) or broken will be your full financial responsibility. ● Your teacher or coach is not responsible for watching your device. It is your responsibility to make sure your device is in a locked and secure environment. ● Avoid situations that are conducive to loss or damage. For example, never leave the device unattended in the classroom, in the gym, unlocked in the locker room, or in other areas where it could be damaged or stolen. ● Do not let anyone use the device. Loss or damage that occurs when anyone else is using your assigned device will be your full financial responsibility. ● Adhere to BGCS School’s Device Use Policy at all times and in all locations. When in doubt about acceptable use, ask the school’s Technology Support Staff. ● Back up your student created documents using provided cloud storage (Google Drive/Docs). Never consider any electronic information safe when stored only on one device. You can also back up time-se...
Sample 1
Standards For. SUPPLIERS A copy of these Standards for Suppliers shall be posted in a location visible to all employees at all facilities that manufacture products for Wal-Mart Stores, Inc. and Its affiliates. Any person with knowledge of a violation of any of these standards by a Supplier or a Wal-Mart associate should call 0-000-XX-XXXXX (0-000-000-0000). (In countries other than the United States, dial AT&T's U.S.A. Direct Number first) or write to: Wal-Mart Ethics Committee, 000 XX 0xx Xx., Xxxxxxxxxxx, XX 00000-0000.
Sample 1

Examples of Standards For in a sentence

  • Education Standards For degree programs and credit courses, the degree/credit must be awarded by regionally accredited institutions.

  • BNYM agrees to implement and maintain appropriate security measures to protect “personal information”, as that term is defined in 201 CMR 17.00: Standards For The Protection Of Personal Information Of Residents Of The Commonwealth (“Massachusetts Privacy Regulation”), consistent with the Massachusetts Privacy Regulation and any applicable federal regulations.

  • Interconnection Standards For Generating FacilitiesAny person or entity planning to operate a generating facility and connect it to the Company’s facilities must receive approval from the Company prior to connecting the generating facility to the Company’s facilities.

  • Standards For Preclearance of De Minimis Transactions (applicable for firms or lines of business who administer compliance for Investment or ADM Employees) ADM and Investment Employees will generally not be given clearance to execute a transaction in any security that is on the Restricted List maintained by the Preclearance Compliance Officer, or for which there is a pending buy or sell order for an affiliated account (other than an index fund).

  • The boundary survey shall meet or exceed the "Minimum Standards For Surveys", as established by the Professional Surveyors Association of Nebraska.

  • The procedures should be performed in accordance with Statement on Standards For Attestation Engagements (SSAE) No. 10: Attestation Standards: Revision and Recodification.

  • The accuracy of meters used for such purpose shall be evaluated and maintained in accordance with the Michigan Public Service Commission's Technical Standards For Gas Service (Technical Standards).

  • Admission Standards: For LL.M., must have prior J.D. or foreign law degree.

  • Reference Standards: For products or workmanship specified by association, trade, or other consensus standards, comply with requirements of the standard, except when more rigid requirements are specified or are required by applicable codes.

  • Please note that the mineral reserves included in this Earnings Release were estimated in accordance with the Canadian Institute of Mining, Metallurgy and Petroleum (“CIM”) 2014 Definition Standards For Mineral Resources and Mineral Reserves, whose definitions are incorporated by reference in National Instrument 43-101.

Related to Standards For

  • NERC Reliability Standards means the most recent version of those reliability standards applicable to the Generating Facility, or to the Generator Owner or the Generator Operator with respect to the Generating Facility, that are adopted by the NERC and approved by the applicable regulatory authorities, which are available at xxxx://xxx.xxxx.xxx/files/Reliability_Standards_Complete_Set.pdf, or any successor thereto.

  • Reliability Standards means the criteria, standards, rules and requirements relating to reliability established by a Standards Authority.

  • Accessibility Standards means accessibility standards and specifications for Texas agency and institution of higher education websites and EIR set forth in 1 TAC Chapter 206 and/or Chapter 213.

  • Safety Standards means all laws, union rules and trade or industry custom or codes of any kind whatsoever, in effect from the date of this Agreement through Final Acceptance of the construction work, pertaining to worker safety and accident prevention applicable to the Project and/or the construction work (including, but not limited to, rules, regulations and standards adopted pursuant to the Occupational Safety and Health Act of 1970, as amended from time to time).

  • Applicable water quality standards means all water quality standards to which a discharge is subject under the federal Clean Water Act and which has been (a) approved or permitted to remain in effect by the Administrator following submission to the Administrator pursuant to Section 303(a) of the Act, or (b) promulgated by the Director pursuant to Section 303(b) or 303(c) of the Act, and standards promulgated under (APCEC) Regulation No. 2, as amended.

  • Quality Standards means the quality standards published by BSI British Standards, the National Standards Body of the United Kingdom, the International Organisation for Standardisation or other reputable or equivalent body, (and their successor bodies) that a skilled and experienced operator in the same type of industry or business sector as the Contractor would reasonably and ordinarily be expected to comply with, and as may be further detailed in the Specification.

  • Water quality standards means provisions of state or federal law which consist of a designated use or uses for the waters of the Commonwealth and water quality criteria for such waters based upon such uses. Water quality standards are to protect the public health or welfare, enhance the quality of water and serve the purposes of the State Water Control Law (§ 62.1-44.2 et seq. of the Code of Virginia) and the federal Clean Water Act (33 USC § 1251 et seq.).

  • Standards Board means the Professional Standards Board established pursuant to 14 Del.C. §1201.

  • Web Site Accessibility Standards/Specifications means standards contained in Title 1 Texas Administrative Code Chapter 206.

  • Standards means: any standards published by BSI British Standards, the National Standards Body of the United Kingdom, the International Organisation for Standardisation or other reputable or equivalent bodies (and their successor bodies) that a skilled and experienced operator in the same type of industry or business sector as the Supplier would reasonably and ordinarily be expected to comply with; any standards detailed in the specification in Framework Schedule 1 (Digital Services) or Framework Schedule 6 (Standards and Security); any standards detailed by the Customer in this Contract or as agreed between the Parties from time to time; any relevant Government codes of practice and guidance applicable from time to time.

  • Privacy Standards means the standards of the privacy of individually identifiable health information, as pursuant to HIPAA.

  • Web Site Accessibility Standards/Specifications means standards contained in Title 1 Texas Administrative Code Chapter 206.

  • Standards of Apprenticeship means this entire document, including these definitions.

  • Security Standards means the final rule implementing HIPAA’s Security Standards for the Protection of Electronic PHI, as amended.

  • National Ambient Air Quality Standards or “NAAQS” means national ambient air quality standards that are promulgated pursuant to Section 109 of the Act, 42 U.S.C. § 7409.

  • Reliability Standard means a requirement to provide for reliable operation of the bulk power system, including without limiting the foregoing requirements for the operation of existing bulk power system facilities, including cybersecurity protection, and the design of planned additions or modifications to such facilities to the extent necessary for reliable operation of the bulk power system, but shall not include any requirement to enlarge bulk power system facilities or to construct new transmission capacity or generation capacity.

  • Service Level Standards has the meaning ascribed thereto in Section 2.1 hereof.

  • Minimum Standards means standards of practice that interpret the legal definition of nursing as well as provide criteria against which violations of the law can be determined.

  • State minimum standards means minimum requirements

  • Codes and Standards means all the applicable codes and standards as indicated in the Technical Specification.

  • NYSRC Reliability Rules means the rules applicable to the operation of the New York Transmission System. These rules are based on Reliability Standards adopted by NERC and NPCC, but also include more specific and more stringent rules to reflect the particular requirements of the New York Transmission System.

  • Ambient air quality standard means an established concentration, exposure time, and frequency of occurrence of air contaminant(s) in the ambient air which shall not be exceeded.

  • New Jersey Stormwater Best Management Practices (BMP) Manual or “BMP Manual” means the manual maintained by the Department providing, in part, design specifications, removal rates, calculation methods, and soil testing procedures approved by the Department as being capable of contributing to the achievement of the stormwater management standards specified in this chapter. The BMP Manual is periodically amended by the Department as necessary to provide design specifications on additional best management practices and new information on already included practices reflecting the best available current information regarding the particular practice and the Department’s determination as to the ability of that best management practice to contribute to compliance with the standards contained in this chapter. Alternative stormwater management measures, removal rates, or calculation methods may be utilized, subject to any limitations specified in this chapter, provided the design engineer demonstrates to the municipality, in accordance with Section IV.F. of this ordinance and N.J.A.C. 7:8-5.2(g), that the proposed measure and its design will contribute to achievement of the design and performance standards established by this chapter.

  • Benchmarks Regulation means Regulation (EU) 2016/1011 of the European Parliament and of the Council of 8 June 2016 on indices used as benchmarks in financial instruments and financial contracts or to measure the performance of investment funds and amending Directives 2008/48/EC and 2014/17/EU and Regulation (EU) No 596/2014;

  • Standards of Practice means the care, skill, and

  • Performance Standards or “PS” shall mean the cleanup levels and other measures of achievement of the remedial action objectives, as set forth in the ROD.