Site Specification Sample Clauses

Site Specification. ‌ Where it is necessary for OptiComm to install Equipment in the Customer’s premises in order to provide a Service, OptiComm will provide the Customer with specifications of the Equipment. The Customer, at its cost, must arrange for all necessary preparatory work to be performed and provide all necessary utility services in order for OptiComm to be able to access, operate and maintain that Equipment.
Sample 1Sample 2Sample 3See All (4)
AutoNDA by SimpleDocs
Site Specification. Where it is necessary for CommSol Holdings to install Equipment in the Customer’s premises in order to provide a Service, CommSol Holdings will provide the Customer with specifications of the Equipment. The Customer, at its cost, must arrange for all necessary preparatory work to be performed and provide all necessary utility services in order for CommSol Holdings to be able to access, operate and maintain that Equipment.
Sample 1
Site Specification. 15.5.1 The Contractor or an Approved Party must inspect the Site and provide the Customer with a Site Specification for approval.
Sample 1
Site Specification. The Licensee's use of the Software is restricted to unlimited concurrent user(s) having access to an unlimited number of accounts on the Licensee's existing database, at the site(s) at which Licensee conducts its day-to-day trust operations, said site(s) being located at Richmond, IN. The Software is to be used by Licensee to process accounts of Licensee only, and acknowledges that Licensor will suffer damage is Licensee permits the Software to be used to process accounts of unrelated third parties not expressly covered by this License Agreement. Licensee grants to Licensor the right to inspect its computer operations to determine if it is in compliance with this Agreement; however, the Licensor agrees that it will act reasonably in the exercise of this right and cooperate with the Licensee to avoid disruption of its computer operations and to preserve the confidentiality of any of its files. Should Licensee be found to be using the Software in violation of this Agreement, Licensee agrees to pay any and all additional fees Licensor determines due and owing under the current fee schedule, accruing from the original date of this Agreement.
Sample 1
Site Specification. The Licensee's use of the Software is restricted to ------------------ unlimited concurrent user(s) having access to an unlimited number of accounts on the Licensee's existing database, at the site(s) at which Licensee conducts its day-to-day operations, said site(s) being located at 000 Xxxxxxxx Xxxxx, Xxxxxx, Xxxxx or a disaster recovery site designated by Licensee. The Software is to be used by Licensee to process accounts of Licensee only, and acknowledges that Licensor will suffer damage if Licensee permits the Software to be used to process accounts of unrelated third parties not expressly covered by this License Agreement. Licensee grants to Licensor the right to inspect its computer operations to determine if it is in compliance with this Agreement: however. the Licensor agrees that it will act reasonably in the exercise of this right and cooperate with the Licensee to avoid disruption of its computer operations and to preserve the confidentiality of any of its files. Should Licensee be found to be using the Software in violation of this Agreement, Licensee agrees to pay any and all additional fees Licensor determines due and owing under the current fee schedule, accruing from the original date of this Agreement.
Sample 1

Related to Site Specification

  • Technical Specifications The Technical Specifications furnished on the CD are intended to establish the standards for quality, performance and technical requirements for all labor, workmanship, material, methods and equipment necessary to complete the Work. When specifications and drawings are provided or referenced by the County, these are to be considered part of the Scope of Work, and to be specifically documented in the Detailed Scope of Work. For convenience, the County supplied specifications, if any, and the Technical Specifications furnished on the CD.

  • Quality Specifications SANMINA-SCI shall comply with the quality specifications set forth in its Quality Manual, incorporated by reference herein, a copy of which is available from SANMINA-SCI upon request.

  • Product Specifications The Company agrees that all Products sold to Xxxx hereunder shall conform to the respective specifications set forth on Schedule A or to such other specifications as are from time to time agreed upon by the Parties.

  • Specifications That part of the Contract Documents consisting of written requirements for materials, equipment, systems, standards, and workmanship as applied to the Work, and certain administrative requirements and procedural matters applicable thereto. The term "Specifications" shall also include all written matter in the Project Manual or on the drawings and any Addenda or Change Orders thereto.

  • Configuration The configuration for the Purchase Right Aircraft will be the Detail Specification for Model 767-3S2F aircraft at the revision level in effect at the time of the Supplemental Agreement. Such Detail Specification will be revised to include (i) changes required to obtain required regulatory certificates and (ii) other changes as mutually agreed upon by Boeing and Customer.

  • Specification Changes Upon any change in the Product Specifications, stability protocols, QC laboratory methods raw material specification or Packaging Specifications (whether initiated by Horizon or made in response to a request by sanofi-aventis that is agreed to by Horizon), including the addition of new packaging configurations, new SKUs, new formulations, or a change in either raw materials or Packaging Component supply, Horizon shall promptly advise sanofi-aventis in writing of such changes, and sanofi-aventis shall promptly advise Horizon as to any scheduling and/or price adjustments which may result from such changes. Prior to implementation of such changes, the Parties shall negotiate in good faith in an attempt to reach agreement on (a) the new Product Price for any Product which embodies such changes, (b) any amounts to be reimbursed by Horizon to sanofi-aventis as described in the next sentence of this paragraph, and (c) any other amendments to this Agreement which may be necessitated by such changes (i.e., an adjustment to the lead time for purchase orders). Horizon shall reimburse sanofi-aventis for the mutually agreed upon reasonable expenses incurred by sanofi-aventis as a result of such changes, including, but not limited to, reimbursing sanofi-aventis for its mutually agreed validation and development costs, capital expenditure costs, costs for any Packaging Components or other materials rendered unusable as a result of such changes, and cost of required stability to support a change. If during the Term Horizon amends the Product Specifications or Packaging ***Confidential Treatment Requested MANUFACTURING AND SUPPLY AGREEMENT PAGE 7 Specifications (whether voluntarily or as required by law) so as to render obsolete quantities of the Active Ingredient, Excipients and/or Packaging Components for the Product on hand at sanofi-aventis, Horizon shall (i) accept the return of all such obsolete Active Ingredient and (ii) purchase from sanofi-aventis, at sanofi-aventis’ Acquisition Cost, all such obsolete Excipients and Packaging Components obtained by sanofi-aventis pursuant to its normal procurement policies to manufacture quantities of the Product pursuant to Horizon forecasts under Section 6.1. Sanofi-aventis’ normal procurement policies for purposes of the preceding sentence of this Article 5 shall be considered to be quantities of Excipients and Packaging Components corresponding to the immediately following […***…] months of Horizon’s most recent forecasted Product demand. If a change in Specifications is initiated by sanofi-aventis and approved by Horizon, any cost associated with said change shall be borne by sanofi-aventis. In the event that a change in Specifications is initiated by Horizon or driven by a regulatory or business change, the costs associated with qualification of the change shall be paid by Horizon. The amount of the change shall be reasonable and customary and subject to written approval by Horizon, such approval not to be unreasonably withheld. Sanofi-aventis, with written agreement and approval from Horizon, will be responsible for the appropriate (cGMP) destruction of any materials covered under this Article 5, and sanofi-aventis shall be reimbursed by Horizon at the reasonable and customary approved rate.

  • Changes to Specifications All Specifications and any changes thereto agreed to by the parties from time to time shall be in writing, dated and signed by the parties. Any change to the Packaging process shall be deemed a Specification change. No change in the Specifications shall be implemented by PCI, whether requested by Client, requested by PCI or requested or required by any Regulatory Authority, until the parties have agreed in writing to such change, the implementation date of such change, and any increase or decrease in costs, expenses or fees associated with such change (including any change to Pricing). PCI shall respond promptly to any request made by Client for a change in the Specifications, and both parties shall use commercially reasonable, good faith efforts to agree to the terms of such change in a timely manner. As soon as possible after a request is made for any change in Specifications, PCI shall notify Client of the costs associated with such change and shall provide such supporting documentation as Client may reasonably require. Client shall pay all costs associated with such agreed upon changes. If there is a conflict between the terms of this Agreement and the terms of the Specifications, this Agreement shall control. PCI reserves the right to postpone effecting changes to the Specifications, or in the case of changes requested or required by any Regulatory Authority postpone Packaging under this Agreement, until such time as the parties agree to and execute the required written amendment.

  • Acceptance Testing At the time of installation of a LIS trunk group, and at no additional charge, acceptance tests will be performed to ensure that the service is operational and meets the applicable technical parameters.

  • Statement of Work The Contractor shall provide the services and staff, and otherwise do all things necessary for or incidental to the performance of work, as set forth below:

Time is Money Join Law Insider Premium to draft better contracts faster.