APPROVAL OF MANUFACTURER Sample Clauses

APPROVAL OF MANUFACTURER. The names of proposed manufacturers, material persons, and dealers who are to furnish materials, fixtures, equipment, appliances and other fittings shall be submitted to the EIU for approval, within two (2) weeks after Contract award date to afford NYCDOT time to conduct a proper investigation. Any such approval shall not relieve the Contractor of any of its responsibilities under the Contract.
Sample 1Sample 2
AutoNDA by SimpleDocs
APPROVAL OF MANUFACTURER. Within [***] after the Effective Date, Rain shall provide the list of the proposed manufacturers of Licensed Compound or Product, including information: (a) name of manufacturer, (b) address of manufacturer, (c) the location of manufacture, (d) what to manufacture (API or pharmaceutical preparation and its dosage form), (e) the name of their sub-licensor or entity that gave manufacturing rights, and whether they will be granted a right to sublicense, and (f) in case of the manufacturer of the Product, for which countries or regions to sell. Daiichi Sankyo shall review such list and inform Rain in writing of any potential manufacturer(s) on the list that are approved (such approval not to be unreasonably withheld, delayed or conditioned). If Daiichi Sankyo does not notify Rain of its approval of a proposed manufacturer within [***] of receiving the list from Rain, such sublicensee shall be [***] = CERTAIN CONFIDENTIAL INFORMATION CONTAINED IN THIS DOCUMENT, MARKED BY BRACKETS, HAS BEEN OMITTED BECAUSE THE INFORMATION (I) IS NOT MATERIAL AND (II) WOULD BE COMPETITIVELY HARMFUL IF PUBLICLY DISCLOSED. EXECUTION VERSION deemed approved. If Rain wishes to engage a manufacturer that is not on the then current list of approved manufacturers, it may request approval of such manufacturer by submitting a written request to Daiichi Sankyo. Daiichi Sankyo shall review such request and inform Rain in writing if such proposed manufacturer is approved. If Daiichi Sankyo does not notify Rain of its approval of a manufacturer within [***] of receiving the request from Rain, such manufacturer shall be deemed approved. Any denial of approval by Daiichi Sankyo shall be made in good faith based on reasonable concerns related to the particular manufacturer. If requested by Rain, Daiichi Sankyo shall discuss its reasons for denying approval of a manufacturer. For clarity, approval of a manufacturer by Daiichi Sankyo does not change or limit Rain’s obligations under this Agreement. Daiichi Sankyo shall have the right to review the terms of the proposed sublicense agreement in advance and provide comments, such comments to be considered in good faith by Rain.
Sample 1Sample 2
APPROVAL OF MANUFACTURER. Each automotive manufacturer of the Company's automotive franchised dealerships shall have consented to, authorized and approved (subject to Sunbelt and BAG fulfilling all requirements to obtain such consent [monetary and otherwise]) the transactions contemplated by this Agreement on terms substantially no less favorable than the terms which the Company is subject to immediately prior to the execution of this Agreement. If Sunbelt does not terminate this Agreement pursuant to Section 8.1(d) hereof within thirty (30) days after their receipt of a Definitive Response (as hereinafter defined) from any automobile manufacturer concerning the transaction contemplated herein, then for all purposes of this Agreement, including, but not limited to, this Section 6.11, the consent of such automobile manufacturer shall be conclusively deemed to have been given to the transactions contemplated herein. For purposes of this Section 6.11, "Definitive Response" shall mean any automobile manufacturer's written response to any notice delivered by the Company of the transactions contemplated hereby, which response withholds consent or conditions consent or further consideration on specified actions or obligations to be undertaken by Sunbelt, BAG, the Company, the Stockholder and/or any other party; provided, that a response including only a request for additional information shall not be considered a Definitive Response.
Sample 1
APPROVAL OF MANUFACTURER. Licensor reserves the right to approve the manufacturer prior to the start of any manufacture or servicing under the Patent.
Sample 1

Related to APPROVAL OF MANUFACTURER

  • Supply of Materials The following materials will be supplied by the department Name of Materials Rate. Place of delivery 1.

  • Manufacturer A firm that operates or maintains a factory or establishment that produces on the premises, the materials or supplies obtained by the Contractor. Regular Dealer - A firm that owns, operates, or maintains a store, warehouse, or other establishment in which the materials or supplies required for the performance of the contract are bought, kept in stock, and regularly sold to the public in the usual course of business. A regular dealer engages in, as its principal business and in its own name, the purchase and sale or lease of the products in question. A regular dealer in such bulk items as steel, cement, gravel, stone, and petroleum products need not keep such products in stock, if it owns and operates distribution equipment for the products. Brokers and packagers are not regarded as manufacturers or regular dealers within the meaning of this section. North Carolina Unified Certification Program (NCUCP) - A program that provides comprehensive services and information to applicants for DBE certification, such that an applicant is required to apply only once for a DBE certification that will be honored by all recipients of USDOT funds in the state and not limited to the Department of Transportation only. The Certification Program is in accordance with 49 CFR Part 26. United States Department of Transportation (USDOT) - Federal agency responsible for issuing regulations (49 CFR Part 26) and official guidance for the DBE program. Forms and Websites Referenced in this Provision DBE Payment Tracking System - On-line system in which the Contractor enters the payments made to DBE subcontractors who have performed work on the project. xxxxx://xxxx.xxx.xxxxx.xx.xx/Vendor/PaymentTracking/ DBE-IS Subcontractor Payment Information - Form for reporting the payments made to all DBE firms working on the project. This form is for paper bid projects only. xxxx://xxx.xxxxx.xxx/doh/forms/files/DBE-IS.xls RF-1 DBE Replacement Request Form - Form for replacing a committed DBE. xxxx://xxxxxxx.xxxxx.xxx/projects/construction/Construction%20Forms/DBE%20MBE%20WBE %20Replacement%20Request%20Form.pdf SAF Subcontract Approval Form - Form required for approval to sublet the contract. xxxx://xxxxxxx.xxxxx.xxx/projects/construction/Construction%20Forms/Subcontract%20Approval %20Form%20Rev.%202012.zip JC-1 Joint Check Notification Form - Form and procedures for joint check notification. The form acts as a written joint check agreement among the parties providing full and prompt disclosure of the expected use of joint checks. xxxx://xxxxxxx.xxxxx.xxx/projects/construction/Construction%20Forms/Joint%20Check%20Notif ication%20Form.pdf Letter of Intent - Form signed by the Contractor and the DBE subcontractor, manufacturer or regular dealer that affirms that a portion of said contract is going to be performed by the signed DBE for the amount listed at the time of bid. xxxx://xxxxxxx.xxxxx.xxx/letting/LetCentral/Letter%20of%20Intent%20to%20Perform%20as%20 a%20Subcontractor.pdf

  • SOURCE CODE ESCROW FOR LICENSED PRODUCT If Source Code or Source Code escrow is offered by either Contractor or Product manufacturer or developer to any other commercial customers, Contractor shall either: (i) provide Licensee with the Source Code for the Product; or (ii) place the Source Code in a third party escrow arrangement with a designated escrow agent who shall be named and identified to the State, and who shall be directed to release the deposited Source Code in accordance with a standard escrow agreement acceptable to the State; or (iii) will certify to the State that the Product manufacturer/developer has named the State, acting by and through the Authorized User, and the Licensee, as a named beneficiary of an established escrow arrangement with its designated escrow agent who shall be named and identified to the State and Licensee, and who shall be directed to release the deposited Source Code in accordance with the terms of escrow. Source Code, as well as any corrections or enhancements to such source code, shall be updated for each new release of the Product in the same manner as provided above and such updating of escrow shall be certified to the State in writing. Contractor shall identify the escrow agent upon commencement of the Contract term and shall certify annually that the escrow remains in effect in compliance with the terms of this clause. The State may release the Source Code to Licensees under this Contract who have licensed Product or obtained services, who may use such copy of the Source Code to maintain the Product.

  • Commercialization License Subject to the terms of this Agreement, including without limitation Section 2.2 and Theravance's Co-Promotion rights in Section 5.3.2, Theravance hereby grants to GSK, and GSK accepts, an exclusive license under the Theravance Patents and Theravance Know-How to make, have made, use, sell, offer for sale and import Alliance Products in the Territory.

  • Regulatory Approval 25.1 The Parties understand and agree that this Agreement and any amendment or modification hereto will be filed with the Commission for approval in accordance with Section 252 of the Act and may thereafter be filed with the FCC. The Parties believe in good faith and agree that the services to be provided under this Agreement are in the public interest. Each Party covenants and agrees to fully support approval of this Agreement by the Commission or the FCC under Section 252 of the Act without modification.

  • Removal of Materials If you decide you would like to remove your Materials from the Service, you may provide written notice to Prime Publishing by either deleting the image through the Prime Publishing interface or by contacting Prime Publishing customer service, and Prime Publishing will remove such Materials from the Service within a reasonable period of time. 5) License for Name, Trademarks and Likenesses. You hereby grant to Prime Publishing, its Affiliates and sublicensees a nonexclusive, worldwide, royalty-free license to use all trademarks, trade names, and the names and likenesses of any individuals that appear in the Materials. You grant Prime Publishing, its Affiliates and sublicensees the right to use the name that you submit in connection with the Materials. 6) Specifications and Guidelines. You agree to submit Materials to us in accordance with all guidelines for use of the Service posted on the Prime Publishing web site or of which you are otherwise notified ("Guidelines"), as these Guidelines may be changed in the future. 7)

  • Manufacture 2.1. The LED(s) on the LED module shall be equipped with suitable fixation elements.

  • PRODUCT MANUFACTURER'S SUPPLIERS Only those dealers/distributors listed by the manufacturer will be considered authorized to act on behalf of the Product Manufacturer.

  • Third Party Components The Products and Services may contain third party components (including open source software) subject to separate license agreements. To the limited extent a third party license expressly supersedes this XXXX, such third party license governs Customer’s use of that third party component.

  • Limited Product Warranty BYD warrants that the Product will be free from defects in materials or workmanship for a period of ten (10) years from Warranty Start Date, subject to the exclusions and limitations set out below.

Time is Money Join Law Insider Premium to draft better contracts faster.