SOURCE CODE ESCROW FOR LICENSED PRODUCT. If Source Code or Source Code escrow is offered by either Contractor or Product manufacturer or developer to any other commercial customers, Contractor shall either: (i) provide Licensee with the Source Code for the Product; or (ii) place the Source Code in a third party escrow arrangement with a designated escrow agent who shall be named and identified to the State, and who shall be directed to release the deposited Source Code in accordance with a standard escrow agreement acceptable to the State; or (iii) will certify to the State that the Product manufacturer/developer has named the State, acting by and through the Authorized User, and the Licensee, as a named beneficiary of an established escrow arrangement with its designated escrow agent who shall be named and identified to the State and Licensee, and who shall be directed to release the deposited Source Code in accordance with the terms of escrow. Source Code, as well as any corrections or enhancements to such source code, shall be updated for each new release of the Product in the same manner as provided above and such updating of escrow shall be certified to the State in writing. Contractor shall identify the escrow agent upon commencement of the Contract term and shall certify annually that the escrow remains in effect in compliance with the terms of this paragraph. The State may release the Source Code to Licensees under this Contract who have licensed Product or obtained services, who may use such copy of the Source Code to maintain the Product. FOR NEGOTIATED CONTRACTS THE FOLLOWING CLAUSES ARE RESERVED BECAUSE BIDDING DOES NOT APPLY: Clauses: 7, 8, 9, 10, 11, 12, 13, 16, 15, 21, 25, 26, 28, 29, 30, 31, 32, 33, 36, 49, 50, 52, 54 and 37 I N D E X Paragraph Paragraph A No. Additional Warranties 72 Advertising Results 20 Applicability 1 Assignment 56 Assignment of Claim 66 Audit of Licensed Product Usage 80 Authentication of Facsimile Bids 10 B Bid Contents 12 Bid Evaluation 29 Bid Opening 7 Bid Submission 8 C Changes to Product or Service Offerings 84 Clarification/Revisions 31 Confidential/Trade Secret Materials 14 Conflict of Terms 4 Conditional Bid 30 Contract Xxxxxxxx 62 Contract Creation/Execution 38 Contract Term - Renewal 71 Cooperation with Third Parties 70 D Default - Authorized User 63 Definitions 5 Disqualification for Past Performance 35 Drawings 25 E Emergency Contracts 43 Employees/Subcontractors/Agents 55 Equivalent or Identical Bids 33 Estimated/Specific Quantity Contracts 42 E...
SOURCE CODE ESCROW FOR LICENSED PRODUCT. If Source Code or Source Code escrow is offered by either Contractor or Product manufacturer or developer to any other commercial customers, Contractor shall either: (i) provide Licensee with the Source Code for the Product; or (ii) place the Source Code in a third party escrow arrangement with a designated escrow agent who shall be named and identified to the State, and who shall be directed to release the deposited Source Code in accordance with a standard escrow agreement acceptable to the State; or (iii) will certify to the State that the Product manufacturer/developer has named the State, acting by and through the Authorized User, and the Licensee, as a named beneficiary of an established escrow arrangement with its designated escrow agent who shall be named and identified to the State and Licensee, and who shall be directed to release the deposited Source Code in accordance with the terms of escrow. Source Code, as well as any corrections or enhancements to such source code, shall be updated for each new release of the Product in the same manner as provided above and such updating of escrow shall be certified to the State in writing. Contractor shall identify the escrow agent upon commencement of the Contract term and shall certify annually that the escrow remains in effect in compliance with the terms of this clause. The State may release the Source Code to Licensees under this Contract who have licensed Product or obtained services, who may use such copy of the Source Code to maintain the Product.
SOURCE CODE ESCROW FOR LICENSED PRODUCT. If Source Code or Source Code escrow is offered by either Contractor or Product manufacturer or developer to any other commercial customers, Contractor shall either: (i) provide Licensee with the Source Code for the Product; or (ii) place the Source Code in a third party escrow arrangement with a designated escrow agent who shall be named and identified to the State, and who shall be directed to release the deposited Source Code in accordance with a standard escrow agreement acceptable to the State; or (iii) will certify to the State that the Product manufacturer/developer has named the State, acting by and through the Authorized User, and the Licensee, as a named beneficiary of an established escrow arrangement with its designated escrow agent who shall be named and identified to the State and Licensee, and who shall be directed to release the deposited Source Code in accordance with the terms of escrow. Source Code, as well as any corrections or enhancements to such source code, shall be updated for each new release of the Product in the same manner as provided above and such updating of escrow shall be certified to the State in writing. Contractor shall identify the escrow agent upon commencement of the Contract term and shall certify annually that the escrow remains in effect in compliance with the terms of this paragraph. The State may release the Source Code to Licensees under this Contract who have licensed Product or obtained services, who may use such copy of the Source Code to maintain the Product. FOR NEGOTIATED CONTRACTS THE FOLLOWING CLAUSES ARE RESERVED BECAUSE BIDDING DOES NOT APPLY: Clauses: 7, 8, 9, 10, 11, 12, 13, 16, 15, 21, 25, 26, 28, 29, 30, 31, 32, 33, 36, 49, 50, 52, 54 and 37 I N D E X Paragraph Paragraph B Bid Contents Bid Evaluation Bid Opening Bid Submission 12 29 7 8 D Default - Authorized User Definitions Disqualification for Past Performance Drawings 63 5 35 25 E Emergency Contracts Employees/Subcontractors/Agents Equivalent or Identical Bids Estimated/Specific Quantity Contracts Ethics Compliance Expenses Prior to Contract Execution Extraneous Terms 43 55 33 42 3 19 13 F Facsimile Submissions Freedom of Information Law 9 16 G Governing Law 2 I Indemnification Indemnification Relating to Third Party Rights Independent Contractor Installation Insurance Interest on Late Payments International Bidding 74 75 68 52 77 64 6 L Late Bids Legal Compliance Limitation of Liability 11 73 76 APPENDIX C Contractor's Executive Law, Article ...
SOURCE CODE ESCROW FOR LICENSED PRODUCT. If Source Code or Source Code escrow is offered by either Contractor or Product manufacturer or developer to any other commercial customers, Contractor shall either: (i) provide Licensee with the Source Code for the Product; or (ii) place the Source Code in a third party escrow arrangement with a designated escrow agent who shall be named and identified to the State, and who shall be directed to release the deposited Source Code in accordance with a standard escrow agreement acceptable to the State; or (iii) will certify to the State that the Product manufacturer/developer has named the State, acting by and through the Authorized User, and the Licensee, as a named beneficiary of an established escrow arrangement with its designated escrow agent who shall be named and identified to the State and Licensee, and who shall be directed to release the deposited Source Code in accordance with the terms of escrow. Source Code, as well as any corrections or enhancements to such source code, shall be updated for each new release of the Product in the same manner as provided above and such updating of escrow shall be certified to the State in writing. Contractor shall identify the escrow agent upon commencement of the Contract term and shall certify annually that the escrow remains in effect in compliance with the terms of this paragraph. The State may release the Source Code to Licensees under this Contract who have licensed Product or obtained services, who may use such copy of the Source Code to maintain the Product. FOR NEGOTIATED CONTRACTS THE FOLLOWING CLAUSES ARE RESERVED BECAUSE BIDDING DOES NOT APPLY: Clauses: 7, 8, 9, 10, 11, 12, 13, 16, 15, 21, 25, 26, 28, 29, 30, 31, 32, 33, 36, 49, 50, 52, 54 and 37 I N D E X Paragraph Paragraph A No. Additional Warranties 72 Advertising Results 20 Applicability 1 Assignment 56 Assignment of Claim 66 Audit of Licensed Product Usage 80 Authentication of Facsimile Bids 10 B Bid Contents 12 Bid Evaluation 29 Bid Opening 7 Bid Submission 8 M No. Modification of Contract Terms 40 N No Hardstop/Passive License Monitoring 85 O On-Site Storage 54 Ownership/Title to Project Deliverables 81 P Participation in Centralized Contracts 39 Performance and Responsibility Qualifications 34 Performance/Bid Bond 58 Prevailing Wage Rates Public Works & Building Services Contracts 17 C Changes to Product or Service Offerings 84 Clarification/Revisions 31 Confidential/Trade Secret Materials 14 Conflict of Terms 4 Conditional Bid 30 Contract Xxx...
SOURCE CODE ESCROW FOR LICENSED PRODUCT. If Source Code or Source Code escrow is offered by either Contractor or Product manufacturer or developer to any other commercial customers, Contractor shall either: (i) provide Licensee with the Source Code for the Product; or (ii) place the Source Code in a third party escrow arrangement with a designated escrow agent who shall be named and identified to the State, and who shall be directed to release the deposited Source Code in accordance with a standard escrow agreement acceptable to the State; or (iii) will certify to the State that the Product manufacturer/developer has named the State, acting by and through the Authorized User, and the Licensee, as a named beneficiary of an established escrow arrangement with its designated escrow agent who shall be named and identified to the State and Licensee, and who shall be directed to release the deposited Source Code in accordance with the terms of escrow. Source Code, as well as any corrections or enhancements to such source code, shall be updated for each new release of the Product in the same manner as provided above and such updating of escrow shall be certified to the State in writing. Contractor shall identify the escrow agent upon commencement of the Contract I N D E X Clause Clause A Advertising Results Assignment Assignment of Claim Audit of Licensed Product Usage No. 13 43 53 67 P Participation in Centralized Contracts Performance/Bid Bond Prevailing Wage Rates - Public Works and Building Services Contracts Pricing Procurement Card Product Acceptance Product Delivery Product References Product Version Products Manufactured in Public Institutions Prompt Payments Proof of License Purchase Orders Q R Rejected Product Remanufactured, Recycled, Recyclable or Recovered Materials Remedies for Breach Repaired or Replaced Product/Components S Savings/Force Majeure Security Site Inspection Shipping/Receipt of Product Software License Grant Source Code Escrow for Licensed Product Subcontractors and Suppliers Suspension of Work T Taxes Termination Title and Risk of Loss Toxic Substances W Warranties Weekend and Holiday Deliveries No. 27 45 10 17 20 66 33 14 70 16 51 69 32 39 15 52 41 48 56 19 35 65 73 44 46 11 47 36 54 59 34 B Bid Contents 7 C Changes to Product or Service Offerings Confidential/Trade Secret Materials Contract Invoicing Contract Creation/Execution Contract Term - Renewal Cooperation with Third Parties 71 9 49 26 58 57 D Default - Authorized User Definitions Disputes Drawings 50 2 64 18 I Inde...
SOURCE CODE ESCROW FOR LICENSED PRODUCT. If Source Code or Source Code escrow is offered by either Contractor or Product manufacturer or developer to any other commercial customers, Contractor shall either: (i) provide Licensee with the Source Code for the Product; or (ii) place the Source Code in a third party escrow arrangement with a designated escrow agent who shall be named and identified to the State, and who shall be directed to release the deposited Source Code in accordance with a standard escrow agreement acceptable to the State; or (iii) will certify to the State that the Product manufacturer/developer has named the State, acting by and through the Authorized User, and the Licensee, as a named beneficiary of an established escrow arrangement with its designated escrow agent who shall be named and identified to the State and Licensee, and who shall be directed to release the deposited Source Code in accordance with the terms of escrow. Source Code, as well as any corrections or enhancements to such source code, shall be updated for each new release of the Product in the same manner as provided above and such updating of escrow shall be certified to the State in writing. Contractor shall identify the escrow agent upon commencement of the Contract term and shall certify annually that the escrow remains in effect in compliance with the terms of this paragraph. The State may release the Source Code to Licensees under this Contract who have licensed Product or obtained services, who may use such copy of the Source Code to maintain the Product. I N D E X Paragraph Paragraph A No. Additional Warranties 72 Advertising Results 20 Applicability 1 Assignment 56 Assignment of Claim 66 Audit of Licensed Product Usage 80 Authentication of Facsimile Bids 10 B Bid Contents 12 Bid Evaluation 29 Bid Opening 7 Bid Submission 8 C Changes to Product or Service Offerings 84 Clarification/Revisions 31 Confidential/Trade Secret Materials 14 Conflict of Terms 4 Conditional Bid 30 Contract Xxxxxxxx 62 Contract Creation/Execution 38 Contract Term - Renewal 71 Cooperation with Third Parties 70 D Default - Authorized User 63 Definitions 5 Disqualification for Past Performance 35 Drawings 25 E Emergency Contracts 43 Employees/Subcontractors/Agents 55 Equivalent or Identical Bids 33 Estimated/Specific Quantity Contracts 42 Ethics Compliance 3 Expenses Prior to Contract Execution 19 Extraneous Terms 13 F Facsimile Submissions 9 Freedom of Information Law 16 G Governing Law 2 I Indemnification 74 Indemnification Relati...
SOURCE CODE ESCROW FOR LICENSED PRODUCT. A determination could be made on a case-by-case basis to reach an amicable resolution between parties.
SOURCE CODE ESCROW FOR LICENSED PRODUCT. If Source Code or Source Code escrow is offered by either Contractor or Product manufacturer or developer to any other commercial customers, Contractor shall either: (i) provide Licensee with the Source Code for the Product; or (ii) place the Source Code in a third party escrow arrangement with a designated escrow agent who shall be named and identified to the State, and who shall be directed to release the deposited Source Code in accordance with a standard escrow agreement acceptable to the State; or (iii) will certify to the State that the Product manufacturer/developer has named the State, acting by and through the Authorized User, and the Licensee, as a named beneficiary of an established escrow arrangement with its designated escrow agent who shall be named and identified to the State and Licensee, and who shall be directed to release the deposited Source Code in accordance with the terms of escrow. Source Code, as well as any corrections or enhancements to such source code, shall be updated for each new release of the Product in the same manner as provided above and such updating of escrow shall be certified to the State in writing. Contractor shall identify the escrow agent upon commencement of the Contract term and shall certify annually that the escrow remains in effect in compliance with the terms of this paragraph. The State may release the Source Code to Licensees under this Contract who have licensed Product or obtained services, who may use such copy of the Source Code to maintain the Product. GENERAL SPECIFICATIONS APPENDIX B I N D E X Paragraph Paragraph B Bid Contents Bid Evaluation Bid Opening Bid Submission 12 29 7 8 D Default - Authorized User Definitions Disqualification for Past Performance Drawings 63 5 35 25 E Emergency Contracts Employees/Subcontractors/Agents Equivalent or Identical Bids Estimated/Specific Quantity Contracts Ethics Compliance Expenses Prior to Contract Execution Extraneous Terms 43 55 33 42 3 19 13 F Facsimile Submissions Freedom of Information Law 9 16 G Governing Law 2 I Indemnification Indemnification Relating to Third Party Rights Independent Contractor Installation Insurance Interest on Late Payments International Bidding 74 75 68 52 77 64 6 L Late Bids Legal Compliance Limitation of Liability 11 73 76 July 2006 20 Appendix D, Number 1, Contractor Status; and, Multifunction Printers (MFPs) (Ledger Size) Performance Specifications Contractor Name: Konica Minolta Business Solutions, Inc. Contractor Status: Sec...
SOURCE CODE ESCROW FOR LICENSED PRODUCT. In lieu of placing Vendor source code and documentation in escrow, Vendor agrees that in the event that the Contractor fails to provide for continuing maintenance of the licensed software for reasons other than a NYS entity non-payment of maintenance fees or breach of license terms, Contractor will provide one copy of the most recent version of the licensed software object code to the NYS entity. The NY S entity agrees that the code will be used solely for creating error corrections for the continuing operation of the Licensed Software on its own system, and shall be subject to the terms and conditions of the Contractor license APPENDIX C Contractor’s Year 2000 Warranty Compliance Statement
SOURCE CODE ESCROW FOR LICENSED PRODUCT