ADDITIONAL SLASH TREATMENT REQUIREMENTS. Within areas shown on Contract Area Map, Contractor shall perform work according to the specifications in the attached Table, unless otherwise agreed in writing. Subdivision, Payment Units, Roads and or Road Segments Additional Slash Treatment Requirements All Units Yard all stem material to a top d.o.b. of 1 inch, from timber designated for cutting, with the following exception: broken portions of logs and tops less than 4 feet in length need not be yarded. Broken ends of merchantable logs shall not be bucked off in the units. Slash and Substandard Material accumulated at the landings shall be Decked or Machined Piled, in accordance with specifications above. Material accumulated at landings shall be considered as Timber Subject to Agreement under C2.11#, described as Substandard Material and may be removed and paid for at Contractor's option. * S A M P L E * C6.815 - THIRD PARTY SCALING SERVICES (09/2004) Notwithstanding the requirement for Forest Service or parties under contract to Forest Service to provide Scaling services under B6.81, Scaling designated in A10 shall be conducted by a third party Scaling organization approved by Forest Service. Scaling shall be done in accordance with A9 and Contractor shall bear costs for Scaling service. In the event third party Scaling service is suspended for causes such as strikes, termination of third party's approval to Scale National Forest logs by Forest Service, or Contractor's failure to pay third party Scaling costs, hauling operations shall be suspended until agreed alternate Scaling services are provided or service by third party is resumed. When an approved alternate Scaling location pursuant to B6.811 does not have an approved third party scaling organization as a commonly used Scaling services provider, Forest Service or parties under contract to Forest Service shall provide Scaling services at the approved alternate location. In such an event, the cost of waived third party Scaling listed in A10 shall be charged to Integrated Resource Account. If Forest Service and Contractor agree in writing that another party under contract to Forest Service will perform Scaling, the contract will be modified to include C6.816# and Integrated Resource Account will be charged for such Scaling. C6.9# - STEWARDSHIP PROJECTS (09/2004) * S A M P L E * Performance of stewardship projects shall be in accordance with the following specifications. Stewardship Projects C6.9# – STEWARDSHIP PROJECTS. (9/04) Performance of stew...
ADDITIONAL SLASH TREATMENT REQUIREMENTS. Within areas shown on Sale Area Map, Purchaser shall perform work according to the specifications in the attached Table, unless otherwise agreed in writing. Subdivision, Payment Units, Roads and or Road Segments Additional Slash Treatment Requirements N/A Yard all stem material to a top d.o.b. of 1 inch, from timber designated for cutting, with the following exception: broken portions of logs and tops less than 4 feet in length need not be yarded. Broken ends of merchantable logs shall not be bucked off in the units. Slash and Substandard Material accumulated at the landings shall be Decked or Machined Piled, in accordance with specifications above. Material accumulated at landings shall be considered as Timber Subject to Agreement under C2.11#, described as Substandard Material and may be removed and paid for at Purchaser's option.
ADDITIONAL SLASH TREATMENT REQUIREMENTS. Within areas shown on Sale Area Map, Purchaser shall perform work according to the specifications in the attached Table, unless otherwise agreed in writing. Subdivision, Payment Units, Roads and or Road Segments Additional Slash Treatment Requirements ALL Yard all stem material to a top d.o.b. of 1 inch, from timber designated for cutting, with the following exception: broken portions of logs and tops less than 4 feet in length need not be yarded. Broken ends of merchantable logs shall not be bucked off in the units. Slash and Substandard Material accumulated at the landings shall be Decked or Machine Piled, in accordance with specifications above. Mulch will be spread to a maximum depth no greater than 4.0 inches on skid trails. Existing slash adjacent to skid trails will be used, if available, before slash from the landings. ALL Material accumulated at landings shall be considered as Timber Subject to Agreement under C2.11#, described as Substandard Material and may be removed and paid for at Purchaser's option.
ADDITIONAL SLASH TREATMENT REQUIREMENTS. Within areas shown on Contract Area Map, Contractor shall perform work according to the specifications in the attached Table, unless otherwise agreed in writing. Yard all stem material to a top d.o.b. of 1 inch, from timber designated for cutting, with the following exception: broken portions of logs and tops less than 4 feet in length need not be yarded. Broken ends of merchantable logs shall not be bucked off in the units. Slash and Substandard Material accumulated at the landings shall be Decked or Machined Piled, in accordance with specifications above. Material accumulated at landings shall be considered as Timber Subject to Agreement under KT- CT.1.1#, described as Substandard Material and may be removed and paid for at Contractor's option. N/A SAMPLE KT-GT.8-2# - Measuring - Option 2. (2/2005) Timber quantity estimates in AT.2 were made as described in the Forest Service Handbook FSH 2409.12, Timber Cruising Handbook, available for inspection in the offices of the Forest Supervisor and District Ranger. When Trees are marked after date of project advertisement, or when volume is added pursuant to CT.1.3, CT.1.3.1, CT.1.3.2, CT.1.3.3, CT.1.3.4, CT.1.4, CT.3.7, CT.4, or other authorization hereunder, each tree that is less than 25 inches in diameter breast height (DBH) and has less than 25% visible defect shall have its volume determined from the following table. Trees greater than or equal to 25 inches DBH; trees with more than 25% defect; or trees from species or diameter groups shown as "N/A" in the following table shall be measured using procedures in FSH 2409.12 and shall use the "R5 Cubic Foot Volume Tables to a Utilization Top", 9/97. Xxxxxx IRTC Stewardship Tree Volume (Based on original cruise tree data) (Volume in 100 Cubic Feet - CCF) DBH DF IC PP WF 10 .0060 .0317 .1082 .0588 12 .1005 .0734 .1410 .1336 14 .2426 .1289 .2044 .2281 16 .3547 .1983 .2986 .3425 18 .4808 .2817 .4236 .4765 20 .6208 .3789 .5793 .6304 22 .7747 .4901 .7658 .8040
ADDITIONAL SLASH TREATMENT REQUIREMENTS. Within areas shown on Sale Area Map, Purchaser shall perform work according to the specifications in the attached Table, unless otherwise agreed in writing. Subdivision, Payment Units, Roads and or Road Segments Additional Slash Treatment Requirements N/A Yard all stem material to a top d.o.b. of 1 inch, from timber designated for cutting, with the following exception: broken portions of logs and tops less than 4 feet in length need not be yarded.
ADDITIONAL SLASH TREATMENT REQUIREMENTS. Within areas shown on Sale Area Map, Purchaser shall perform work according to the specifications in the attached Table, unless otherwise agreed in writing. Subdivision, Payment Units, Roads and or Road Segments Additional Slash Treatment Requirements All subdivisions Slash and Substandard Material accumulated at the landings shall be Decked or Machined Piled, in accordance with specifications above. Material accumulated at landings shall be considered as Timber Subject to Agreement under C2.11#, described as Substandard Material and may be removed and paid for at Purchaser's option. SAMPLE
ADDITIONAL SLASH TREATMENT REQUIREMENTS. Within areas shown on Sale Area Map, Purchaser shall perform work according to the specifications in the attached Table, unless otherwise agreed in writing. Subdivision, Payment Units, Roads and or Road Segments Additional Slash Treatment Requirements ALL Yard all stem material to a top d.o.b. of 1 inch, from timber designated for cutting, with the following exception: broken portions of logs and tops less than 4 feet in length need not be yarded. Broken ends of merchantable logs shall not be bucked off in the units. Slash and Substandard Material accumulated at the landings shall be Decked or Machine Piled, in accordance with specifications above. Mulch will be spread to a maximum depth no greater than 4.0 inches on skid trails. Existing slash adjacent to skid trails will be used, if available, before slash from the landings. ALL Material accumulated at landings shall be considered as Timber Subject to Agreement under C2.11#, described as Substandard Material and may be removed and paid for at Purchaser's option. Sale Name: Brumby 2 Reoffer P a g e 162E SPECIFICATIONS PURSUANT TO C6.7# - SLASH TREATMENT (8/2006) CONTINUED
ADDITIONAL SLASH TREATMENT REQUIREMENTS. Within areas shown on Sale Area Map, Purchaser shall perform work according to the specifications in the attached Table, unless otherwise agreed in writing. Subdivision, Payment Units, Roads and or Road Segments Additional Slash Treatment Requirements ALL SUBDIVISIONS Yard all stem material to a top d.o.b. of 1 inch, from timber designated for cutting, with the following exception: broken portions of logs and tops less than 4 feet in length need not be yarded. ALL SUBDIVISIONS Broken ends of merchantable logs shall not be bucked off in the units. ALL SUBDIVISIONS Slash and Substandard Material accumulated at the landings shall be Decked or Machine Piled, in accordance with specifications above. All Subdivisions Material accumulated at landings shall be considered as Timber Subject to Agreement under C2.11#, described as Substandard Material and may be removed and paid for at Purchaser's option. Sample
ADDITIONAL SLASH TREATMENT REQUIREMENTS. Within areas shown on Sale Area Map, Purchaser shall perform work according to the specifications in the attached Table, unless otherwise agreed in writing. Subdivision, Payment Units, Roads and or Road Segments Additional Slash Treatment Requirements N/A Yard all stem material to a top d.o.b. of 1 inch, from timber designated for cutting, with the following exception: broken portions of logs and tops less than 4 feet in length need not be yarded. Broken ends of merchantable logs shall not be bucked off in the units.
ADDITIONAL SLASH TREATMENT REQUIREMENTS. Within areas shown on Sale Area Map, Purchaser shall perform work according to the specifications in the attached Table, unless otherwise agreed in writing. Contract Name: Xxxxxx IRTC Page 165F Contract 2400-13,(10/19) Subdivision, Payment Units, Roads and or Road Segments Additional Slash Treatment Requirements All Cutting Units Yard all stem material to a top d.o.b. of 1 inch, from timber designated for cutting, with the following exception: broken portions of logs and tops less than 4 feet in length need not be yarded. Broken ends of merchantable logs shall not be bucked off in the units. Slash and Substandard Material accumulated at the landings shall be Decked or Machined Piled, in accordance with specifications above. Material accumulated at landings shall be considered as Timber Subject to Agreement under C2.11#, described as Substandard Material and may be removed and paid for at Purchaser's option. SAMPLE
