Technical Capability definition

Technical Capability. The information shall meet all of the requirements contained herein. The offerors shall provide with their information package, at a minimum, in written English the following information. • Evidence that the offeror operates an established business with a permanent physical address (such as a store front) and telephone listing and is registered to conduct business in Kingdom of Saudi Arabia. • Experience in relevant business along with any relevant certification and licenses. Responsibility will be determined by analyzing whether the apparent successful offeror complies with the requirement of FAR subpart 9.1 including: • Ability to comply with the required performance period, taking into consideration all existing commercial and governmental business commitments; • Satisfactory record of integrity and business ethics; • Necessary organization, experience, and skills or the ability to obtain them; • Necessary equipment and facilities or the ability to obtain them; and • Be otherwise qualified and eligible to receive an award under applicable laws and regulations.
Technical Capability means the ability of a public water system to:
Technical Capability means the Technical and Financial capability of the Bidder to be assessed in accordance with the RFP Document.

Examples of Technical Capability in a sentence

  • The bidders shall have to meet all the minimum criteria regarding: 1) Financial Capacity (Bank Solvency Certificate)2) Technical Capability comprising of personnel & equipment capability3) Experience / Credential The eligibility of a bidder will be ascertained on the basis of the document(s) in support of the minimum criteria as mentioned in (1), (2) & (3) above and the declaration executed through prescribed affidavit in non-judicial stamp paper of appropriate value duly notarized.

  • The financial offer (this section) should be submitted on a separate page from the Technical Capability and Schedule information.

  • The bidders shall have to meet all the minimum criteria regarding:1) Financial Capacity2) Technical Capability comprising of personnel & equipment capability3) Experience / CredentialThe eligibility of a bidder will be ascertained on the basis of the document(s) in support of the minimum criteria as mentioned above and the declaration executed through prescribed affidavit in non-judicial stamp paper of appropriate value duly notarized.

  • Technical Capability and Operating HighlightsIoT technology is flourishing in the past few years and the demand for smart connectivity devices is on the growing trend, especially with the launch of smart home products imbedded with voice control technology which provide a clear direction of how IoT technology can be applied in daily life.

  • Demonstrations will be assigned a portion of the overall Technical Capability score.

  • The bidders shall have to meet all the minimum criteria regarding:1) Financial Capacity2) Technical Capability comprising of personnel & equipment capability3) Experience/CredentialThe eligibility of a bidder will be ascertained on the basis of the documents(s) submitted in support of the minimum criteria as mentioned in tender documents.

  • The financial offer (this section) should be submitted on a separate from the Technical Capability and Schedule information.

  • The State will allow the mathematical results of the total sum for each Offeror to establish ranking of the three highest scores which will designate which Offerors continue to the RFP Demonstration of Product Technical Capability Phase of the solicitation.

  • We also mentioned the possibility that since the building was going to be a change of use – residential to a commercial enterprise, they might want to consider working with the Illinois Historic Preservation Agency (IHPA) in Springfield, so they might qualify for a Federal Rehabilitation Tax Credit, since the building was located in a National Register District.

  • Name of the Authorised Person APPENDIX 6 C : Format for Technical Capability Proposal a.


More Definitions of Technical Capability

Technical Capability. The Offeror shall at a minimum, provide references for all projects referenced in Volume I, Factor 1, Tab 1, “Technical Capability”. If the Government determines it to be necessary, the Government may require an Offeror to provide additional past performance references where the references originally provided do not respond to inquiries.
Technical Capability. The ISP should have the technical expertise and equipment to interface with a dedicated Network to Network Interface (NNI) on the Network and shall be required to provide high-quality internet services to customers, in alignment with industry standards for quality and pricing. • Financial Stability: The ISP should have a strong financial standing and be able to invest in the necessary infrastructure to join the open access network. As such prior to execution of this agreement the proposed ISP must provide 2 years of audit or reviewed financials. • Compliance with Regulations: The ISP must adhere to local, state, and federal regulations regarding internet services and telecommunications. • Customer Service: The ISP should have a track record of providing excellent customer service and support. Additionally local support representatives must reside within 1 hour of the Network service area. • In line with this requirement the proposed ISP must supply a copy of their terms and conditions as it relates to their end-users. The ISP’s terms and conditions must be in alignment with a community and customer focused business model. (See proposed Customer Commitment to the End-User)
Technical Capability means the proposed project is technically appropriate for its intended purpose and can be operated and maintained for the term of financial assistance.
Technical Capability. (Trade-off) Factor 3 – Subcontracting/Small Business Participation – (Acceptable or Unacceptable) Factor 4 – Price
Technical Capability means the physical infrastructure of the water system, including but not limited to the source water adequacy, infrastructure adequacy, and technical knowledge based on information provided by the borrower and its own inquiry of system operators.

Related to Technical Capability

  • Technical Capacity means the maximum firm capacity that the transmission system operator can offer to the network users, taking account of system integrity and the operational requirements of the transmission network;

  • Alternate Fuel Capability means a situation where an alternate fuel could have been utilized whether or not the facilities for such use have actually been installed; provided however, where the use of natural gas is for plant protection, feedstock or process uses and the only alternate fuel is propane or other gaseous fuel, then the Buyer will be treated as if he had no altemate fuel capability.

  • Design capacity means the volume of a containment feature at a discharging facility that accommodates all permitted flows and meets all Aquifer Protection Permit conditions, including allowances for appropriate peaking and safety factors to ensure sustained, reliable operation.

  • Local Capacity Area has the meaning set forth in the CAISO Tariff.

  • Licensed capacity means the number of children the Department has determined the day care home can care for at any one time in addition to any children living in the home who are under the age of 12 years. Children age 12 and over on the premises are not considered in determining licensed capacity.

  • External Capacity Resource means: (1) for NYISO, (a) an entity (e.g., Supplier, Transmission Customer) or facility (e.g., Generator, Interface) located outside the NYCA with the capability to generate or transmit electrical power, or the ability to control demand at the direction of the NYISO, measured in megawatts or (b) a set of Resources owned or controlled by an entity within a Control Area, not the NYCA, that also is the operator of such Control Area; and (2) for PJM, a generation resource located outside the metered boundaries of the PJM Region (as defined in the PJM Tariff) that meets the definition of Capacity Resource in the PJM Tariff or PJM’s governing agreements filed with the Commission.

  • Compatibility means compatibility as defined in point (10) of Article 2 of Directive (EU) 2019/770;

  • Breath Alcohol Technician (BAT) means an individual who instructs and assists individuals in the alcohol testing process and who operates the EBT.

  • capability , in relation to an employee, means his capability assessed by reference to skill, aptitude, health or any other physical or mental quality, and

  • Potential electrical output capacity means, with regard to a unit, 33 per- cent of the maximum design heat input of the unit.

  • Contract Capacity has the meaning set forth in Section 3.1(f).

  • Technical safeguards means the technology and the policy and procedures for its use that 27 protect electronic PHI and control access to it.

  • Manufacturer means the person or body who is responsible to the approval authority for all aspects of the type approval process and for ensuring conformity of production. It is not essential that the person or body is directly involved in all stage of the construction of the vehicle, system, component or separate technical unit which is the subject of the approval process.

  • Satellite Manufacturer means, with respect to any Satellite, the prime contractor and manufacturer of such Satellite.

  • Contract Manufacturer means a company that produces goods under contract for another company under the label or brand name of that company.

  • Project Capacity means the AC capacity of the project at the generating terminal(s) and to be contracted with MSEDCL for supply from the Solar Power Project.

  • Training means instruction or teaching designed to impart a specific skill, as opposed to general knowledge.

  • Technical Manager means Navios ShipManagement Inc., a company incorporated in the Xxxxxxxx Islands and having its registered office at Trust Company Complex, Ajeltake Road, Ajeltake Island, Majuro, Xxxxxxxx Xxxxxxx, XX00000 or any other person appointed by an Owner, with the prior written consent of the Agent, as the technical manager of the relevant Mortgaged Vessel;

  • Spectrum Compatibility means the capability of two (2) copper loop transmission system technologies to coexist in the same cable without service degradation and to operate satisfactorily in the presence of cross talk noise from each other. Spectrum compatibility is defined on a per twisted pair basis for specific well-defined transmission systems. For the purposes of issues regarding Spectrum Compatibility, service degradation means the failure to meet the Bit Error Ratio (BER) and Signal-to-Noise Ratio (SNR) margin requirements defined for the specific transmission system for all Loop lengths, model Loops, or loss values within the requirements for the specific transmission system.

  • Nail technician means any person who for compensation manicures or pedicures natural nails, or who performs artificial nail services for compensation, or any combination thereof.

  • Engine Manufacturer means CFM International, Inc.

  • Nameplate capacity means the maximum electrical generating output (in MWe) that a generator can sustain over a specified period of time when not restricted by seasonal or other deratings as measured in accordance with the United States Department of Energy standards.

  • Technician means an individual determined to be qualified to remove or process parts by an appropriate organization that is licensed, accredited, or regulated under federal or state law. The term includes an enucleator.

  • MANUFACTURERS means M/s and shall include their legal representatives, successors, and assigns.

  • Volunteer firefighter means a firefighter whose position normally requires less than 600

  • Assistive technology service means any service that directly assists a child with a disability in the selection, acquisition, or use of an assistive technology device. The term includes: