STORE FRONT. 1. Landlord shall provide the Premises storefront in accordance with the architectural theme of Landlord’s Master Plans (as defined in Section K 1 herein) and Xxxx County, Georgia zoning conditions. Landlord shall provide a minimum of one (1) EA 3’0”x6’8” glass storefront door. Storefront shall be designed with ¼" thick or 1” insulated glass (at Landlord’s option based on energy code calculations) and standard size aluminum storefront framing.
STORE FRONT. Tenant shall keep Tenant’s display windows illuminated and the signs and exterior lights lighted each and every day of the Term of the Lease during the hours designated by Landlord.
STORE FRONT. 1. A standard storefront shall be provided in keeping with the overall architectural plan for the center.
STORE FRONT. Landlord will finish and install straight standard aluminum and clear plate glass store front, with a pair of 3' entry doors.
STORE FRONT. The store front shall be bronzed, anodized aluminum and smoked glass, tempered as required by code. All store fronts and interiors shall be in accordance with architectural standards established for the shopping center by Landlord and shall be subject to review and approval by Landlord or its architect, as provided above. Landlord to provide up to three (3) sets of double exterior front doors per Tenant's needs.
STORE FRONT. Store Front per Landlord's design shall be bronze anodized aluminum with I/4" clear glass panels and one (1) single acting front door with single cylinder dead bolt lock and closer.
STORE FRONT. 1. Landlord shall provide the Premises storefront in accordance with the architectural theme of Landlord’s Master Plans (as defined in Section K 1 herein). Landlord shall provide a minimum of one (1) EA 3’0”x6’8” glass storefront door. Storefront shall be designed with ¼" thick or 1” insulated glass (at Landlord’s option based on energy code calculations) and standard size aluminum storefront framing.
STORE FRONT. Maximum Length 15 feet Maximum Height 2 feet Balance Vertical Capital letters will be spaced so they have an equal border on top and bottom of each letter. Smaller case letters will be placed even with the bottom of the capital letter. Horizontal Letters will be spaced equally on both the left half of the sign area and on the right half of the sign area. Miscellaneous All letters are to be mounted flush to fascia. Projected mounting of letters is not permitted. Letters are to be mounted with stainless steel fasteners to prevent staining of fascia.
STORE FRONT. 2. Signage
STORE FRONT. The store front shall be 1" thick clear insulating glass and prefinished metal panels set in an anodized aluminum thermal break frame system. One tempered clear glass and anodized aluminum entrance door to be provided by Landlord. DEMISING WALLS Tenant demising walls (party walls) shall typically be 5/8" thick Type X gypsum board on 4" standard steel studs at 16" centers. Tenant shall field verify actual stud location. Gypsum board will be taped and sanded, ready for finishing by Tenant. Where the steel studs are to carry any Tenant required wall mounted equipment, the costs to reinforce the wall to carry the additional loads to be borne by Tenant. One side of each demising wall above the ceiling plane will be carried to underside of roof deck by Landlord.
