Installation of Customer Equipment Sample Clauses

Installation of Customer Equipment. Customer may prepare plans and specifications that identify the proposed layout that Customer desires to install pursuant to each Ordering Document (the “Installation Proposal”). Installation Proposals must be submitted to INAP for review and approval a minimum of fourteen (14) days following the execution of an Ordering Document. Customer acknowledges and agrees that any submitted Installation Proposal shall not be binding upon INAP and that INAP may prepare an installation plan without reference to the Installation Proposal. If Customer does not submit an Installation Proposal to INAP within fourteen (14) days of the execution of an Ordering Document, INAP shall prepare an installation plan for the physical location, layout, and the routing of cabling, wire, conduits, and innerducts pursuant to each Ordering Document. INAP shall itself, or through contractors of its choice, perform construction or installation of risers, conduit, innerduct, cabling, electrical wiring, racks and cabinets, that comprise any part of the INAP Network (as defined in the Network Services Schedule). The costs of installing the Equipment, including (but not limited to) constructing walls or cages around the Data Center Suite, installing racks, cabinets, conduit, cabling, electrical wiring and distribution points, and connecting to distribution points and network systems of other providers, will be borne exclusively by Customer. If INAP and Customer agree that INAP will perform any of the work of installing the Equipment, Customer shall pay INAP for the costs thereof at the rates set forth in the applicable schedule, within thirty (30) days following its receipt of INAP’s invoice thereof.
AutoNDA by SimpleDocs
Installation of Customer Equipment. (a) Qwest shall provide for the installation of Contractor's Equipment as stated in this Agreement and in the Service Description. Customer shall give Qwest ten (10) days notice prior to the date of requested installation.
Installation of Customer Equipment. Installation of Customer Equipment by or for Customer shall be performed in accordance with Provider’s installation policies and specifications. Customer shall comply with all seismic and other requirements of applicable federal, provincial, regional, municipal or other local codes. All Services provided at each Customer Space shall be under the direction and instruction of Customer’s personnel, and Customer accepts sole responsibility for services performed by it or on its behalf and agrees to pay Provider for such services when they are provided by Provider as set forth herein. All costs and expenses incurred in connection with the installation of Customer Equipment shall be the sole responsibility of Customer
Installation of Customer Equipment. Customer shall, at its expense, cause the Customer Equipment to be delivered, installed, operated and maintained in a safe condition, meeting or exceeding telecommunications industry standards and the provisions set forth in this Agreement.
Installation of Customer Equipment. A Customer may request that Equinix install Customer’s Equipment. Equinix, at its discretion, may agree to perform such installation, but Customer must enter into a separate agreement with Equinix to perform such work.

Related to Installation of Customer Equipment

  • Customer Equipment Customer represents and warrants that it owns or has the legal right and authority, and will continue to own or maintain the legal right and authority during the term of this Agreement, to place and use the Customer Equipment as contemplated by this Agreement. Customer further represents and warrants that its placement, arrangement, and use of the Customer Equipment in the Internet Data Centers complies with the Customer Equipment Manufacturer's environmental and other specifications.

  • Installation of Equipment You represent that there are no legal, contractual or similar restrictions on the installation of the Equipment in the location(s) you have authorized. It is your responsibility to ensure compliance with all applicable building codes, zoning ordinances, homeowners’ association rules, covenants, conditions, and restrictions related to the Service, to pay any fees or other charges, and to obtain any permits or authorizations necessary for the installation or use of the Service (collectively "Legal Requirements"). You are solely responsible for any fines or similar charges for violation of any applicable Legal Requirements. You acknowledge and agree that Viasat or its designated service provider will be required to access your premises and computer to install and maintain the Equipment, including, without limitation, the antenna and its components. Standard Equipment installations performed by Viasat-authorized installers include: (i) installation of the antenna to an outside wall or sloped roof; (ii) travel to and from your Service location within 50 miles of the installer’s office; (iii) cable routed through one exterior wall and one interior wall or floor; (iv) connection of the antenna to the modem using up to 150 feet of cable; (v) connection of the modem to one computer using up to 7 feet of cable; and (vi) required mounting and cabling hardware. Any different or additional installation services or hardware are non-standard and may result in additional charges to be agreed upon between you and the installer. All installations include attaching the Equipment to your computer, installing software on your computer and configuring your computer to optimize the performance of the Internet Service. You confirm that you have reviewed the installation plan and agreed to any associated charges. If you approved a roof mount, you acknowledge the potential risks associated with this type of installation (including, without limitation, with respect to any warranty that applies to your roof or roof membrane). By signing this Agreement, scheduling one or more service or installation visits, and permitting us or our service provider to enter your home, you are authorizing Viasat and its service provider to perform all of the above actions. You are responsible for backing up the data on your computer and we highly recommend that you do so prior to permitting access to us or one of our designated service providers. NEITHER VIASAT NOR ITS SERVICE PROVIDER SHALL HAVE ANY LIABILITY WHATSOEVER FOR ANY LOSSES RESULTING FROM THE EQUIPMENT OR ANY INSTALLATION, REPAIR OR OTHER SERVICES ASSOCIATED WITH THE EQUIPMENT, INCLUDING WITHOUT LIMITATION, DAMAGE TO YOUR PREMISES OR LOSS OF SOFTWARE, DATA OR OTHER INFORMATION FROM YOUR COMPUTER. This limitation does not apply to any damages arising from the gross negligence or willful misconduct of us or one of our designated service providers. Time frames for installation, if any, are not guaranteed and may vary depending on the types of services requested and other factors.

  • Collocation of Switching Equipment CLEC may collocate any equipment that is necessary for Interconnection or access to Unbundled Network Elements.

  • Location of Equipment The Customer shall not remove the Equipment from the location shown herein as the place of use of the equipment, without prior written approval of the Company. The Customer shall inform the Company by email upon demand of the exact location of the Equipment while it is in the Customer’s possession.

  • Your Equipment All equipment and facilities provided by you for use with your Services is “Customer Equipment.” You are solely responsible for installing, maintaining, configuring, repairing, replacing, upgrading and using your Customer Equipment. Astound has no responsibility whatsoever with respect to your Customer Equipment. If your Customer Equipment impairs the Services, you will remain liable for payment of the applicable Fees for your Services. If, at your request, Xxxxxxx should attempt to resolve difficulties caused by your Customer Equipment, such efforts will be performed at Astound’s discretion and at Astound’s then- current standard hourly rates for such work. Any Customer Equipment you use in connection with the Services must meet Astound’s then-current minimum technical and other requirements.

  • Installation Services 3.1 The Bitstream 2a Service includes a Standard Install as set out below (in each case to the extent that the relevant provisioning works are not already complete for the relevant Service Order).1

  • Computer Equipment No computers and/or personal electronic devices, such as tablets and laptop computers, or any component thereof, may be purchased with funds provided under this Contract, regardless of purchase price, without prior written approval of ADMINISTRATOR. Any such purchase shall be in accordance with specifications provided by ADMINISTRATOR, be subject to the same inventory control conditions specified in Subparagraphs 19.1.1 to 19.1.4, and, at the sole discretion of ADMINISTRATOR, become the property of COUNTY upon termination of this Contract.

  • Installation Where installation is required, Contractor shall be responsible for placing and installing the product in the required locations at no additional charge, unless otherwise designated on the Contract or purchase order. Contractor’s authorized product and price list shall clearly and separately identify any additional installation charges. All materials used in the installation shall be of good quality and shall be free of defects that would diminish the appearance of the product or render it structurally or operationally unsound. Installation includes the furnishing of any equipment, rigging, and materials required to install or replace the product in the proper location. Contractor shall protect the site from damage and shall repair damages or injury caused during installation by Contractor or its employees or agents. If any alteration, dismantling, excavation, etc., is required to achieve installation, the Contractor shall promptly restore the structure or site to its original condition. Contractor shall perform installation work so as to cause the least inconvenience and interference with Customers and with proper consideration of others on site. Upon completion of the installation, the location and surrounding area of work shall be left clean and in a neat and unobstructed condition, with everything in satisfactory repair and order.

  • Electrical Equipment Residents must use only CSA, UL-approved or Canadian-certified electrical equipment; the rated wattage of light fixtures must never be exceeded; and only replacement bulbs supplied by Waterloo maintenance staff may be used. Do not leave any unattended electrical equipment turned on (i.e. hair straighteners, lights etc.)

  • Changes in Equipment, Systems, Etc USBFS reserves the right to make changes from time to time, as it deems advisable, relating to its systems, programs, rules, operating schedules and equipment, so long as such changes do not adversely affect the services provided to the Trust under this Agreement.

Time is Money Join Law Insider Premium to draft better contracts faster.