TYPES OF INSPECTIONS Sample Clauses

TYPES OF INSPECTIONS. Please refer to the Minnesota Feedlot Inspection Checklist (Checklist) to learn more about a feedlot inspection. All inspections must be documented. Compliance Inspection is an onsite, full facility inspection during which all parts of the feedlot are inspected. When inspecting a site registered for >100 AU, the nitrogen section of the Checklist must be filled out for the inspection to be complete. When entering an inspection of this type into Tempo, select FE Compliance Inspection as the Compliance Evaluation Type and load applicable checklist. Construction Inspection is an onsite inspection completed at a feedlot site that is constructing. A construction inspection typically involves just inspecting the construction activity that is taking place and does not require inspection of other parts of the feedlot. When entering an inspection of this type into Tempo, select FE Construction Inspection as the Compliance Evaluation Type and load applicable checklist. Complaint Inspection is an inspection conducted in response to a complaint. A complaint inspection typically involves just inspecting the portion of the feedlot, land application site, manure stockpile or other areas relating to the complaint and does not require inspection of any other area not directly related to the complaint. When entering an inspection of this type into Tempo, select FE Complaint Inspection as the Compliance Evaluation Type. Stockpile Inspection is an onsite inspection conducted to inspect one or more stockpiles. A stockpile inspection typically involves just inspecting the portion of the feedlot relating to the stockpile(s) and does not require inspection of other parts of the feedlot. The stockpile section(s) of the Checklist must be filled out for the inspection to be complete. When entering an inspection of this type into Tempo, select FE Stockpile Inspection as the Compliance Evaluation Type and load the applicable checklist portions. Manure Storage Area Closure is an inspection that has been conducted at a facility and the inspector has evaluated the site’s compliance with manure storage area closure requirements. If you have received a notification of manure storage area closure and did not inspect the facility, follow the procedure forHow to enter Notification of Manure Storage Area Closure” located here (file://xxx.xxxxx.xx.xx/xxxxxx/Xxxxx/Xxxxxxx/). Note that stockpile and manure storage area closure inspections, on their own, do not count towards the minimum seven per...
AutoNDA by SimpleDocs
TYPES OF INSPECTIONS. The CONSULTANT shall perform building, mechanical, electrical, plumbing and special inspections for the PROJECT to ensure compliance with the CITY’s adopted building codes, as the same may be amended during the term of this Contract.
TYPES OF INSPECTIONS. FIRE FIGHTERS will be assigned to enforce the NYS-Fire Code and Property Maintenance Code and the City of Poughkeepsie Minimum Housing Code, and, in addition, FIRE FIGHTERS will respond to complaints received regarding conditions in buildings. FIRE FIGHTERS will be provided check-list form to enable the FIRE FIGHTERS to note other kinds of health and safety issues that they observe during inspections. The forms will be passed along to the Fire Inspection Bureau or Building Department division as appropriate.

Related to TYPES OF INSPECTIONS

  • Rights of Inspection In order to ensure that the Quality Standards are maintained, Licensor and its authorized agents and representatives shall have the right, but not the obligation, with prior notice to Licensee, to enter upon the premises of any office or facility operated by or for Licensee with respect to Sprint PCS Products and Services and Premium and Promotional Items at all reasonable times, to inspect, monitor and test in a reasonable manner facilities and equipment used to furnish Sprint PCS Products and Services and Premium and Promotional Items and, with prior written notice to Licensee, to inspect the books and records of Licensee in a manner that does not unreasonably interfere with the business and affairs of Licensee, all as they relate to the compliance with the Quality Standards maintained hereunder.

  • Tests and Inspections 5.2.1 Tests and Inspections shall comply with title 24, part 1, California Code of Regulations, group 1, article 5, section 4-335, and with the provisions of the Specifications.

  • SCOPE OF INSPECTION The purpose of the inspection is to report the general condition of the home and identify and disclose major defects and deficiencies of the inspected systems and components which existed at the time of the inspection and which are evident to the inspector upon ordinary visual observation. Minor and cosmetic defects may be listed in the report for maintenance purposes but it is not the intent, nor will the inspection report identify and list all minor and cosmetic defects. The inspection is intended to evaluate systems and components of the primary premises. Included with the inspection is the evaluation of primary attached garages/carports/decks/porches/patios. The inspection does not include evaluation of detached garages/carports/patios/decks or other structures unless explicitly specified. The client is encouraged to accompany the inspector during the inspection. Client participation shall be at the client’s risk for personal injury or damage to person or property for any reason or from any cause. The inspection and report are performed and prepared for the sole, confidential and exclusive use and possession of the client(s). The inspection report is not transferable. Systems and components to be inspected include: exposed and visible foundations and structures, exteriors, roofing, plumbing, electrical, attic, interiors, bathrooms and kitchen, basement and crawlspaces, heating and central air conditioning, and garage or carport. LIMITS OF THE INSPECTION The inspection is limited to the readily accessible and visible systems, equipment and components of the home. The inspector will not dismantle and/or move equipment, systems, furniture, appliances, floor coverings, finished or fastened surfaces or components, personal property or other items to conduct this inspection or otherwise to expose concealed or inaccessible conditions. The inspection will not include destructive testing of any kind.

  • Audits/Inspections Contractor agrees to permit the County’s Auditor-Controller or the Auditor- Controller’s authorized representative (including auditors from a private auditing firm hired by the County) access during normal working hours to all books, accounts, records, reports, files, financial records, supporting documentation, including payroll and accounts payable/receivable records, and other papers or property of Contractor for the purpose of auditing or inspecting any aspect of performance under this Contract. The inspection and/or audit will be confined to those matters connected with the performance of the Contract including, but not limited to, the costs of administering the Contract. The County will provide reasonable notice of such an audit or inspection. The County reserves the right to audit and verify the Contractor’s records before final payment is made. Contractor agrees to maintain such records for possible audit for a minimum of three years after final payment, unless a longer period of records retention is stipulated under this Contract or by law. Contractor agrees to allow interviews of any employees or others who might reasonably have information related to such records. Further, Contractor agrees to include a similar right to the County to audit records and interview staff of any subcontractor related to performance of this Contract. Should the Contractor cease to exist as a legal entity, the Contractor’s records pertaining to this Contract shall be forwarded to the County’s project manager.

  • Notice of Inspection SBBC’s agent or its authorized representative shall provide VENDOR reasonable advance written notice (not to exceed two (2) weeks) of any intended audit, inspection, examination, evaluation and or reproduction.

  • Response/Compliance with Audit or Inspection Findings A. Grantee must act to ensure its and its Subcontractors’ compliance with all corrections necessary to address any finding of noncompliance with any law, regulation, audit requirement, or generally accepted accounting principle, or any other deficiency identified in any audit, review, or inspection of the Contract and the services and Deliverables provided. Any such correction will be at Grantee’s or its Subcontractor's sole expense. Whether Xxxxxxx's action corrects the noncompliance shall be solely the decision of the System Agency.

  • Reports and Inspections It will:

  • Audit and Inspection 9.1 The Recipient, without charge, will permit any officer or officers of the Commissioner, external auditing bodies (i.e. National Audit Office or Audit Commission) or their nominees, to visit its premises and/or inspect any of its activities and/or to examine and take copies of the Recipient’s books of account and such other documents or records as in such officers' view may relate to the use of Grant. In addition, examinations may be carried out into the economy, efficiency and effectiveness with which the Grant has been used. The Commissioner shall endeavour, but is not obliged, to provide due notice of his/her intent to conduct an audit.

  • Reporting and Inspection If you use the Software and/or Services outside the Vendor's Cloud, you are required to purchase Subscription Services in a quantity equal to the total number of Units of that Red Hat Product (including variants or components thereof) that you deploy, install, use or execute as set forth in Appendix 1. You will promptly notify Red Hat and Red Hat will invoice you for each Unit on a pro-rata basis and you will pay for such Units within thirty (30) days of the date of invoice or as otherwise set forth in the Agreement. Failure to comply with this Section 4 will be considered a material breach of this Agreement, and will entitle Red Hat and/or Vendor to suspend the Services or terminate this Agreement.

  • Maintenance and Inspection Consultant shall maintain complete and accurate records with respect to all costs and expenses incurred under this Agreement. All such records shall be clearly identifiable. Consultant shall allow a representative of City during normal business hours to examine, audit, and make transcripts or copies of such records and any other documents created pursuant to this Agreement. Consultant shall allow inspection of all work, data, documents, proceedings, and activities related to the Agreement for a period of three (3) years from the date of final payment under this Agreement.

Time is Money Join Law Insider Premium to draft better contracts faster.