Total Project Square Footage definition

Total Project Square Footage or “Construction Gross Area” means the Total Project Square Footage (also called “Construction Gross Area”) as defined in the Building Owners and Managers Association International Multi-Unit Residential Buildings: Standard Methods of Measurement (ANSI/BOMA Z65.4- 2010). It includes all residential and Common Area Facilities buildings in the Project and is measured to the building perimeter, a closed line that encompasses all structured elements of each building at every level including basements and penthouses but excluding roofs (unless they are used for Structured Parking). It includes all fully enclosed areas including stairs, elevators, HVAC shafts, pipes, flues, as well as structured unenclosed areas, such as balconies, roof terraces, plazas, decks, porches, exterior stairs and corridors. Areas with restricted headroom are included within the building perimeter. Not included within the building perimeter are the following: commercial space; non-structural protrusions including eves, cornices, canopies, awnings, sills, ledges, chimneys, casing, wainscoting, gutters, downspouts, signs, shutters, attached electrical or mechanical systems and decorative projections. The “Construction Gross Area” must be prepared and certified by the architect of record for the Project, who may not be an employee of the Applicant or Developer. If the architect of record is an employee of the Applicant or Developer, a third party architect or engineer with no Controlling Interest in the Applicant or Developer must prepare and certify the Construction Gross Area.
Total Project Square Footage or “Construction Gross Area” means the Total Project Square Footage (also called “Construction Gross Area”) as defined in the Building Owners and Managers Association International Multi-Unit Residential Buildings: Standard Methods of Measurement (ANSI/BOMA Z65.4- 2010), to which Applicants should refer for greater detail. It includes all residential and Common Area Facilities buildings in the Project and is measured to the building perimeter, a closed line that encompasses all structured elements of each building at every level including basements and penthouses but excluding roofs (unless they are used for Structured Parking). It includes Structured Parking, but does not include Podium Parking. It includes all fully enclosed areas including stairs, elevators, HVAC shafts, pipes, flues, as well as structured unenclosed areas, such as Balconies, roof terraces, plazas, Decks, Porches, exterior stairs and corridors. Areas with restricted headroom are included within the building
Total Project Square Footage or “Construction Gross Area” means the Total Project Square Footage (also called “Construction Gross Area”) as defined in the Building Owners and Managers Association International Multi-Unit Residential Buildings: Standard Methods of Measurement (ANSI/BOMA Z65.4- 2010), to which Applicants should refer for greater detail. It includes all residential and Common Area Facilities buildings in the Project and is measured to the building perimeter, a closed line that encompasses all structured elements of each building at every level including basements and penthouses but excluding roofs (unless they are used for Structured Parking). It includes Structured Parking, but does not include Podium Parking. It includes all fully enclosed areas including stairs, elevators, HVAC shafts, pipes, flues, as well as structured unenclosed areas, such as Balconies, roof terraces, plazas, Decks, Porches, exterior stairs and corridors. Areas with restricted headroom are included within the building perimeter. Not included within the building perimeter are the following: commercial space; non- structural protrusions including eves, cornices, canopies, awnings, sills, ledges, chimneys, casing, wainscoting, gutters, downspouts, signs, shutters, attached electrical or mechanical systems, and decorative projections. The “Construction Gross Area” must be prepared and certified by the architect

Examples of Total Project Square Footage in a sentence

  • Residential Floor Area plus Non-Residential Floor Area does not equal Total Project Square Footage.

  • Thus, the 1,243 RFA plus a 100 square foot Porch would be compared to the Total Project Square Footage 42,862.00 minus the 132.70 square feet equals 42,729.30 remaining Total Project Square Footage in the building efficiency calculation.

  • For example, if a Project had $7,370,018 in Total Construction Costs and the Total Project Square Footage is 42,862.00, then the total construction cost per square foot would be $171.95.ADOH will add 10% to the interior RFA to calculate a maximum gross square feet permitted in Eligible Basis for that Unit.

  • On October 7th, 2009, the REI staff team hosted a public “Drop In” session for interested parties.

  • Fully executed Michigan Based Product certification, Visitable Units Certification, Barrier Free Units Certification, and Total Project Square Footage Certification.

  • A schedule prepared by the architect that includes: • Residential Floor Area of buildings • Residential Gross Floor Area of buildings • Non-Residential Floor Area • Non-Residential Gross Floor Area • Total Project Square Footage (Net and Gross) Refer to the definitions in this Plan for specific information regarding what is included in each of the terms above.

  • The plans shall include the Residential Floor Area and Total Project Square Footage as defined in this Plan.

  • If the Local Government requires a different method of measuring the square footage, a full explanation along with the calculations to reach the Residential Floor Area and Total Project Square Footage (including how the square footage ties back numerically to the Plans) must be inserted into the Application at this Tab.

  • The maximum allowable Eligible Basis for Total Construction Cost shall be determined by multiplying the following price per square foot costs (specific to project type) by the Total Project Square Footage.

  • If the Local Government requires a different method of measuring the square footage (i.e., International Building Code), a full explanation along with the calculations to reach the Residential Floor Area and Total Project Square Footage (including how the square footage ties back numerically to the Plans) is required.


More Definitions of Total Project Square Footage

Total Project Square Footage or “Construction Gross Area” means the Total Project Square Footage (also called “Construction Gross Area”) as defined in the Building Owners and Managers Association International Multi‐Unit Residential Buildings: Standard Methods of Measurement (ANSI/BOMA Z65.4‐

Related to Total Project Square Footage

  • Square Footage means the total gross horizontal areas of all floors, including usable basement and cellars, below the roof and within the outer surface of the main walls of buildings (or the center lines of party walls separating such buildings or portions thereof) or within lines drawn parallel to and two feet within the roof line of any building or portion thereof without walls (which includes, notwithstanding paragraph 3 below, the square footage of all porches), and including pedestrian access walkways or corridors, but excluding the following:

  • Building Square Footage or "BSF" means the square footage of assessable internal living space of a Unit, exclusive of any carports, walkways, garages, overhangs, patios, enclosed patios, detached accessory structure, other structures not used as living space, or any other square footage excluded under Government Code Section 65995 as determined by reference to the Building Permit for such Unit.

  • Acre-foot means the amount of water necessary to cover one acre of land one foot deep, or about 325,851 U. S. gallons of water.

  • Total Project Cost means the lowest of the following:

  • Total Project Costs means the total amount of money required to complete the Project.

  • Built-Up Area and/or “Covered Area” in relation to a Flat shall mean the floor area of that Flat including the area of balconies and terraces, if any attached thereto, and also the thickness of the walls (external or internal) and the columns and pillars therein Provided That if any wall, column or pillar be common between two Flats, then one-half of the area under such wall column or pillar shall be included in the built-up area of each such Flat.

  • Rentable Area when applied to the Premises, is that area equal to the usable area of the Premises, plus an equitable allocation of Rentable Area within the Building that is not then utilized or expected to be utilized as usable area, including that portion of the Building devoted to corridors, equipment rooms, restrooms, elevator lobby, atrium and mailroom.

  • Rentable Square Feet as used in the Lease will be deemed to include: (a) with respect to the Premises, the usable area of the Premises determined in accordance with the Method for Measuring Floor Area in Office Buildings, ANSI Z65.1-1996 (the "BOMA Standard"), plus a pro rata portion of the main lobby area on the ground floor and all elevator machine rooms, electrical and telephone equipment rooms and mail delivery facilities and other areas used by all tenants of the Building, if any, plus (i) for single tenancy floors, all the area covered by the elevator lobbies, corridors, special stairways, restrooms, mechanical rooms, electrical rooms and telephone closets on such floors, or (ii) for multiple tenancy floors, a pro-rata portion of all of the area covered by the elevator lobbies, corridors, special stairways, restrooms, mechanical rooms, electrical rooms and telephone closets on such floor; and (b) with respect to the Building, the total rentable area for all floors in the Building computed in accordance with the provisions of Subparagraph 1(a) above. In calculating the "Rentable Square Feet" of the Premises or the Building, the area contained within the exterior walls of the Building stairs, fire towers, vertical ducts, elevator shafts, flues, vents, stacks and major pipe shafts will be excluded.

  • Usable Area means the usable area calculated in accordance with the BOMA Standard.

  • Total Floor Area means, the sum total of the total areas of all floors in a building or structure whether at above or below grade measured between the exterior faces of the exterior walls of the building or structure or from the centre line of a common wall separating two uses or from the outside edge of a floor where the outside edge of the floor does not meet an exterior or common wall, and;

  • Net Rentable Area means, with respect to any Real Estate, the floor area of any buildings, structures or other improvements available for leasing to tenants determined in accordance with the Rent Roll for such Real Estate, the manner of such determination to be reasonably consistent for all Real Estate of the same type unless otherwise approved by the Administrative Agent.

  • Rentable Area of the Premises The amount of square footage set forth in Section 1.01(10).

  • Baseline area means any intra- state area (and every part thereof) des- ignated as attainment or unclassifiable under section 107(d)(1)(A)(ii) or (iii) of the Act in which the major source or major modification establishing the minor source baseline date would con- struct or would have an air quality im- pact for the pollutant for which the baseline date is established, as follows: equal to or greater than 1 μg/m3 (an- nual average) for SO2, NO2, or PM10; or equal or greater than 0.3 μg/m3 (annual average) for PM2.5.(ii) Area redesignations under section 107(d)(1)(A)(ii) or (iii) of the Act cannot intersect or be smaller than the area of impact of any major stationary source or major modification which:

  • Gross Floor Area means the total floor area, measured between the outside of exterior walls or between the outside of exterior walls and the centre line of party walls dividing the building from another building, of all floors above the average level of finished ground adjoining the building at its exterior walls;

  • Square feet or "square foot" as used in this Lease includes the area contained within the leased premises together with a common area percentage factor of the leased premises proportionate to the total building area.

  • Footage means still images, video, audio and other data captured by the Flock Hardware or Customer Hardware in the course of and provided via the Flock Services.

  • Water Surface Elevation (WSE means the height, in relation to mean sea level, of floods of various magnitudes and frequencies in the floodplains of coastal or riverine areas.

  • Project area budget means a multiyear projection of annual or cumulative

  • ILUA Area means the geographical area in relation to which the Framework ILUA applies, as specified in Schedule 2 of the Framework ILUA;

  • Redevelopment Project Area means an area designated by the municipality, which is not less in the aggregate than 1 1/2 acres and in respect to which the municipality has made a finding that there exist conditions which cause the area to be classified as an industrial park conservation area or a blighted area or a conservation area, or a combination of both blighted areas and conservation areas.

  • Building Operating Expenses means the portion of "Operating Expenses," as that term is defined in Section 4.2.7 below, allocated to the tenants of the Building pursuant to the terms of Section 4.3.1 below.

  • Building Area means the greatest horizontal area of a building within the outside surface of the exterior walls.

  • Common Area Operating Expenses are defined, for purposes of this Lease, as all costs incurred by Lessor relating to the ownership and operation of the Industrial Center, including, but not limited to, the following:

  • Floor Area means the gross floor area of the specific use.

  • Area C means areas of the West Bank outside Areas A and B, which, except for the issues that will be negotiated in the permanent status negotiations, will be gradually transferred to Palestinian jurisdiction in accordance with this Agreement.