Subcontractor Design Responsibilities Sample Clauses

Subcontractor Design Responsibilities. Initial here if Design Responsibilities are included in Subcontractor’s Scope of Work: _______ _______ Subcontractor agrees to furnish by properly licensed and qualified architects and/or engineers, as applicable, all necessary professional architectural and/or engineering design services (including, but not limited to, plans, engineering drawings, and specifications) necessary for the proper design of the Subcontractor’s Work, as described and intended by the Owner and/or its agents. It is the responsibility of the Subcontractor to completely coordinate their design and construction with that of the Owner, Contractor, Architect, Structural Engineer, Civil Engineer, and the other design/build subcontractors. Complete system design drawings, stamped by a Registered Professional Engineer, shall be provided by the Subcontractor with sufficient information to coordinate with other trades. All drawings shall contain all information and requirements necessary to receive proper Building Permits and meet all Federal, State, and Local codes, ordinances, and inspection requirements. Mechanical equipment, electrical, and structural requirements shall be furnished to electrical and structural engineers so that their respective designs are not delayed. Subcontractor agrees to furnish all said design services in accordance with all applicable laws, building codes, ordinances, regulations and orders of any public authority bearing on the design and/or construction of the work of Subcontractor. This Subcontractor bears all responsibility for the professional and technical accuracy of the design and performance of the system. Any deficiencies in design or performance shall be this Subcontractor's sole responsibility and any corrections or modifications necessary, either before or after construction, to achieve the design intent shall be provided by the Subcontractor at no additional cost to the Owner or Contractor. Subcontractor shall submit for Contractor's review, in accordance with the project schedule, all necessary design development documents, plans, engineering drawings, specifications, working drawings, shop drawings, samples, data and specifications of materials proposed to be incorporated into Subcontractor's work. Subcontractor shall provide copies of its drawings, plans, specifications, etc., in the form and quantities required by Contractor. Subcontractor hereby covenants and agrees to defend, hold harmless and indemnify Contractor as to and from all liability...
Sample 1
AutoNDA by SimpleDocs

Related to Subcontractor Design Responsibilities

  • Contractor Responsibilities 19.1. Contractor shall perform national criminal history checks for Ohio, Indiana, and Kentucky, and 10-panel drug screening tests on all prospective employees performing work under this RFP or coming onto a CMHA property and any resulting contract and provide summaries of the results to the Authority if requested. For the purposes of this section, the term “employees” includes contractor. Prospective employees whose criminal background check discloses a misdemeanor or felony involving crimes of moral turpitude, sexual offenses or harm to persons or property shall not be employed to perform work under this RFP or any resulting contract. Contractor is required to perform drug screening of all employees and to ensure acceptable test results. Criminal history and drug screening checks will be completed at the sole expense of the contractor. Any employee of the Contractor suspected of being under the influence of drugs and or alcohol will be reported to the appropriate personnel at CMHA and/or other local law enforcement. If the employee is determined to be under the influence of drugs or alcohol in any form or manner, or believed by proper authority to be dealing in illicit sale of alcohol or drugs they will be removed and shall not be allowed to return to any job site on the Authority’s property. The Contractor’s contract may be suspended and/or terminated should such a situation occur or if the Contractor fails to submit results pursuant to this section.

  • PRIME CONTRACTOR RESPONSIBILITIES A. The Contractor shall be responsible for completely supervising and directing the work under this Contract and all Subcontractor(s) that it may utilize, using adequate skill and attention. Subcontractor(s) who perform work under this Contract shall be responsible to the Prime Contractor.

  • SCOPE OF WORK AND RESPONSIBILITIES 1. Interconnection Customer’s Scope of Work and Responsibilities The Interconnection Customer will design, construct, own, operate and maintain the Interconnection Customer’s Interconnection Facilities and Collection Feeder Lines in accordance with the following requirements, to the extent not inconsistent with the terms of this Agreement, the ISO OATT or applicable NYISO Procedures: NYISO requirements, industry standards and specifications, regulatory requirements, the Connecting Transmission Owner’s applicable Connecting Transmission Owner’s Electric System Bulletins (“ESBs”), provided at the following website: xxxxx://xxx.xxxxxxxxxxxxxx.xxx/ProNet/Technical-Resources/Electric- Specifications, the System Protection and Interconnection Customer Attachment Facilities Electric Installation Specification for Xxxxxxxxx Solar Project provided as Appendix C to the Facilities Study for the Small Generating Facility (“Project Specific Specifications”), as such specifications shall be modified as a result of the Interconnection Customer’s post Facilities SERVICE AGREEMENT NO. 2557 Study modifications to the Interconnection Customer’s Interconnection Facilities, and Good Utility Practice. The Interconnection Customer shall submit all engineering design and electrical specifications associated with the Interconnection Customer’s Interconnection Facilities to the Connecting Transmission Owner for its review and acceptance in accordance with the ESBs and Project Specific Specifications. The metering of any redundant or standby station service provisions at the Xxxxxxxxx Solar Collector Substation shall be added in accordance with the Connecting Transmission Owner’s retail tariff, P.S.C. No. 220, and the Connecting Transmission Owner’s ESB 750. As per the Project Specific Specifications, the Interconnection Customer will install the RTU provided by Connecting Transmission Owner in accordance with Connecting Transmission Owner’s ESBs, indoors and within 15 feet of the meter(s), and remote from: • heavy traffic areas, work areas, and loading areas; • heat producing or high electrostatic or electromagnetic field producing equipment; and • station batteries. (Note: If no indoor facility is available, then installation of the RTU and revenue metering equipment in a dedicated, weatherproof, heated cubicle (accessible only to Connecting Transmission Owner) is acceptable.) For the revenue metering, the Interconnection Customer shall install a meter panel in accordance with the Project Specific Specifications, ESB 752 and ESB 750. The Interconnection Customer shall mount the revenue metering CT/PT units, make grounding connections, and complete all primary wiring. The Interconnection Customer shall install the meter socket enclosure near the Connecting Transmission Owner’s RTU in accordance with the Project Specific Specifications. Additional right-of-way (“ROW”) will be required for the construction, operation, and maintenance of the Line 301 Tap and must accommodate the 125’ x 125’ work pads required for the installation of the new structures. The Interconnection Customer is responsible for obtaining the property/easements needed for the Line 301 Tap line, access roads to/from the Line 301 Tap, and work pads, in accordance with the standards set forth in the Connecting Transmission Owner’s Standards and Requirements Relating to Third Party Acquisition and Transfer of Real Property Interests to Niagara Mohawk Power Corporation for Electric Facilities and Survey Specifications (January 2019). The Interconnection Customer is responsible for all permitting. Upon termination of this Agreement, Interconnection Customer shall be responsible for all costs associated with the decommissioning and removal of the Connecting Transmission Owner’s Interconnection Facilities.

  • ADDITIONAL CONTRACTOR RESPONSIBILITIES 13 In addition to providing the services described in Paragraph 5 of this 14 Exhibit A, CONTRACTOR agrees to:

  • Construction Responsibilities The party named in Article 1, Responsible Parties, under AGREEMENT is responsible for the following:

  • CONTRACTOR DUTIES 5.1 The Contractor will perform the following duties in regard to any student data it obtains:

  • Contractor’s Responsibilities Unless stated specifically to the contrary in the tender with full supporting explanations, the contractor will be deemed to have concurred as a practical manufacturer with the design and layout of the works as being sufficient to ensure reliability and safety in operation, freedom from undue stresses and satisfactory performance in all other essentials as a working material.

  • University’s Responsibilities A. The University will advise the student(s) of their responsibility to:

  • Specific Responsibilities In addition to its overall responsibility for monitoring and providing a forum to discuss and coordinate the Parties’ activities under this Agreement, the JSC shall in particular:

  • Client Responsibilities You are responsible for (a) assessing each participants’ suitability for the Training, (b) enrollment in the appropriate course(s) and (c) your participants’ attendance at scheduled courses.

Time is Money Join Law Insider Premium to draft better contracts faster.