Removable Alterations definition

Removable Alterations. See Section 4.2.
Removable Alterations means cabling, stairwells, raised floors, filing cabinets and systems, vaults, and other structures, installations, and equipment not typically located in a premises used for general office use. Installations initially made as part of the Work (defined on Exhibit F) do not constitute Removable Alterations.
Removable Alterations. See Section 4.2. “Rules and Regulations” - See Section 6.3.

Examples of Removable Alterations in a sentence

  • Nothing contained herein shall be construed to prevent the Tenant from prosecuting in any condemnation proceedings a claim for relocation expenses and improvements made by the Tenant in the Premises that constitute Tenant’s personal property, including the Removable Alterations.

  • Additionally, Sublandlord agrees that it shall not, prior to the expiration of this Sublease, remove any Optional Removable Alterations, Required Removable Alterations or any other property owned by Sublandlord and currently affixed to the Subleased Premises and used in connection with the operations of the Subleased Premises.

  • Landlord shall notify Tenant whether Landlord will require any such Removable Alterations to be removed at least sixty (60) days prior to the Termination Date (or, if sooner, within ten (10) business days after request for such determination is made by Tenant to Landlord), and if Landlord fails to timely notify Tenant of such removal requirement, Landlord shall be deemed to have waived such requirement.

  • If the Landlord terminates this Lease on the basis of a default by the Tenant and, the Landlord elects to purchase all or a portion of the Removable Alterations as provided above, then the Landlord will credit such amounts due to the Tenant against any sums owed by Tenant to Landlord, whether overdue Annual Fixed Rent, Additional Rent, damages or otherwise.

  • In connection with any removal by the Tenant of the Removable Alterations, the Tenant shall cap off all utility connections behind the adjacent interior finish and restore such interior finish to the extent necessary so that the Premises are left with complete wall, ceiling and floor finishes.

  • Nothing contained herein shall be construed to prevent the Tenant from prosecuting in any condemnation proceedings a claim for relocation expenses and improvements made by the Tenant in the Premises that constitute the Tenant’s personal property, including the Removable Alterations.

  • Upon Landlord’s request, Tenant will remove Removable Alterations at the termination of this Lease, provided Landlord notifies Tenant of the requirement to remove such Removable Alteration at the time Landlord gives its consent to the installation of such Alteration.

  • Optional Removable Alterations and Required Removable Alterations are collectively herein referred to as "Removable Alterations." All movable equipment and furnishings not attached to the Premises shall remain the property of Tenant and shall be removed by Tenant upon termination or expiration of this Lease.

  • Nothing contained herein shall be construed to prevent the Tenant from prosecuting in any condemnation proceedings a claim for relocation and moving expenses, lost profits and revenue and fixtures and improvements made by the Tenant in the Premises that constitute Tenant’s personal property, including the Removable Alterations.

  • Tenant shall surrender the Premises and all alterations and additions thereto (except for any Optional Removable Alterations which Tenant elects to remove as provided in Section 4.3), at the end of the Term, broom clean and otherwise in the aforesaid condition, first removing all goods and effects of Tenant and all Required Removable Alterations, and restoring the Premises as contemplated in Section 4.3. Tenant shall not permit or commit any waste.


More Definitions of Removable Alterations

Removable Alterations means any Alterations made by Tenant to the FF&E and other portions of the Premises that (i) are not in accordance with the ASOT Standards, and (ii) have not been approved by Landlord prior to Tenant’s installation thereof.

Related to Removable Alterations

  • Alterations means all changes, additions, improvements or repairs to, all alterations, reconstructions, renewals, replacements or removals of and all substitutions or replacements for any of the Improvements or Equipment, both interior and exterior, structural and non-structural, and ordinary and extraordinary.

  • Specialty Alterations means Alterations consisting of kitchens, executive bathrooms, raised computer floors, computer installations, vaults, libraries, internal staircases, dumbwaiters, pneumatic tubes, vertical and horizontal transportation systems, and other Alterations of a similar character.

  • Structural Alterations means any Alterations involving the structural, mechanical, electrical, plumbing, fire/life safety or heating, ventilating and air conditioning systems of the Building.

  • Structural alteration means an Alteration that (i) will result in a change in the footprint of the Improvements, (ii) involves the addition of one or more floors to the Improvements, (iii) affects the structural elements or any exterior walls of the Improvements, (iv) decreases the rentable square footage of the Leased Premises other than to a de minimis extent or (v) adversely affects the proper functioning and/or capacity of the building systems in the Improvements.

  • Installations means all property of any kind paid for by Landlord, all Alterations, all fixtures, and all partitions, hardware, built-in machinery, built-in casework and cabinets and other similar additions, equipment, property and improvements built into the Premises so as to become an integral part of the Premises, including, without limitation, fume hoods which penetrate the roof or plenum area, built-in cold rooms, built-in warm rooms, walk-in cold rooms, walk-in warm rooms, deionized water systems, glass washing equipment, autoclaves, chillers, built-in plumbing, electrical and mechanical equipment and systems, and any power generator and transfer switch.

  • Major Alteration means change other than repair or replacement of building materials or equipment with materials and equipment of a similar type.

  • Removable Installations means any items listed on Exhibit F attached hereto and any items agreed by Landlord in writing to be included on Exhibit F in the future, (y) “Tenant’s Property” means Removable Installations and, other than Installations, any personal property or equipment of Tenant that may be removed without material damage to the Premises, and (z) “Installations” means all property of any kind paid for by Landlord, all Alterations, all fixtures, and all partitions, hardware, built-in machinery, built-in casework and cabinets and other similar additions, equipment, property and improvements built into the Premises so as to become an integral part of the Premises, including, without limitation, fume hoods which penetrate the roof or plenum area, built-in cold rooms, built-in warm rooms, walk-in cold rooms, walk-in warm rooms, deionized water systems, glass washing equipment, autoclaves, chillers, built-in plumbing, electrical and mechanical equipment and systems, and any power generator and transfer switch.

  • Installation Work means the construction and installation of the System and the start-up, testing and acceptance (but not the operation and maintenance) thereof, all performed by or for Provider at the Premises.

  • Utility Installations is used in this Lease to refer to all air lines, power panels, electrical distribution, security, fire protection systems, communications systems, lighting fixtures, heating, ventilating and air conditioning equipment, plumbing, and fencing in, on or about the Premises. The term "TRADE FIXTURES" shall mean Lessee's machinery and equipment which can be removed without doing material damage to the Premises. The term "ALTERATIONS" shall mean any modification of the improvements on the Premises which are provided by Lessor under the terms of this Lease, other than Utility Installations or Trade Fixtures. "LESSEE-OWNED ALTERATIONS AND/OR UTILITY INSTALLATIONS" are defined as Alterations and/or Utility Installations made by Lessee that are not yet owned by Lessor pursuant to Paragraph 7.4(a). Lessee shall not make nor cause to be made any Alterations or Utility Installations in, on, under or about the Premises without Lessor's prior written consent. Lessee may, however, make non-structural Utility Installations to the interior of the Premises (excluding the roof) without Lessor's consent but upon notice to Lessor, so long as they are not visible from the outside of the Premises, do not involve puncturing, relocating or removing the roof or any existing walls, or changing or interfering with the fire sprinkler or fire detection systems and the cumulative cost thereof during the term of this Lease as extended does not exceed $2,500.00.

  • Leasehold Improvements means all leasehold improvements situated in or on the Leased Real Property and owned by Seller.

  • Interior means the spaces, parts, components or elements of an individual dwelling unit.

  • Trade Fixtures means Lessee’s machinery and equipment that can be removed without doing material damage to the Premises. The term “Alterations” shall mean any modification of the improvements, other than Utility Installations or Trade Fixtures, whether by addition or deletion. “Lessee Owned Alterations and/or Utility Installations” are defined as Alterations and/or Utility Installations made by Lessee that are not yet owned by Lessor pursuant to Paragraph 7.4(a).

  • Tenant Improvements Defined in Exhibit B, if any.

  • Utility Installation means carpeting, window and wall coverings, power panels, electrical distribution systems, lighting fixtures, air conditioning, plumbing, and telephone and telecommunication wiring and equipment. At the expiration of the term, Lessor may require the removal of any or all of said alterations, improvements, additions or Utility Installations, and the restoration of the Premises and the Office Building Project to their prior condition, at Lessee's expense. Should Lessor permit Lessee to make its own alterations, improvements, additions or Utility Installations, Lessee shall use only such contractor as has been expressly approved by Lessor, and Lessor may require Lessee to provide Lessor, at Lessee's sole cost and expense, a lien and completion bond in an amount equal to one and one-half times the estimated cost of such improvements, to insure Lessor against any liability for mechanic's and materialmen's liens and to insure completion of the work. Should Lessee make any alterations, improvements, additions or Utility Installations without the prior approval of Lessor, or use a contractor not expressly approved by Lessor, Lessor may, at any time during the term of this Lease, require that Lessee remove any part or all of the same.

  • Installation Site means the site at which the Product is originally installed.

  • Fixtures means those leasehold improvements, additions, alterations and installations constituting all or a part of Bank Premises and which were acquired, added, built, installed or purchased at the expense of the Failed Bank, regardless of the holder of legal title thereto as of Bank Closing.

  • Communications Equipment means the communications equipment of the Licensee and its affiliates, including, without limitation, cabinets, racks, electronic equipment and other similar equipment.

  • Tenant’s Property means Removable Installations and, other than Installations, any personal property or equipment of Tenant that may be removed without material damage to the Premises, and (z) “Installations” means all property of any kind paid for by Landlord, all Alterations, all fixtures, and all partitions, hardware, built-in machinery, built-in casework and cabinets and other similar additions, equipment, property and improvements built into the Premises so as to become an integral part of the Premises, including, without limitation, fume hoods which penetrate the roof or plenum area, built-in cold rooms, built-in warm rooms, walk-in cold rooms, walk-in warm rooms, deionized water systems, glass washing equipment, autoclaves, chillers, built-in plumbing, electrical and mechanical equipment and systems, and any power generator and transfer switch.

  • Common Areas is defined as all areas and facilities outside the Premises and within the exterior boundary line of the Project and interior utility raceways and installations within the Unit that are provided and designated by the Lessor from time to time for the general non-exclusive use of Lessor, Lessee and other tenants of the Project and their respective employees, suppliers, shippers, customers, contractors and invitees, including parking areas, loading and unloading areas, trash areas, roadways, walkways, driveways and landscaped areas.

  • Improvements shall have the meaning set forth in the granting clause of the Mortgage.

  • Military installation means: a base, camp, post, station, yard, center, homeport facility for any ship, or other activity under the jurisdiction of the Department of Defense, including any leased facility, which is located within any of the several States, the District of Columbia, the Commonwealth of Puerto Rico, the U.S. Virgin Islands, Guam, American Samoa, the Northern Marianas Islands and any other U.S. Territory. Such term does not include any facility used primarily for civil works, rivers and harbors projects, or flood control projects.

  • Capital Improvements mean the purchase, renovation, rehabilitation, or construction of permanent land, buildings, structures, equipment and furnishings used directly for or in the Project, and any goods or services for the Project that are purchased and capitalized under GAAP, including any organizational costs and research and development costs incurred in Illinois. Capitalized lease costs for land, buildings, structures or equipment shall be included in “Capital Improvements” only if the lease term, including any extensions or options to extend, equals or exceeds the term of this Agreement, and provided that such lease costs are valued at their present value using the corporate interest rate prevailing at the time the Company filed its Application with the Department.

  • Tenant’s Personal Property means all motor vehicles, Inventories, FAS and any other tangible personal property of Tenant, if any, acquired by Tenant at its election and with its own funds on and after the date hereof and located at the Leased Property or used in Tenant's business at the Leased Property and all modifications, replacements, alterations and additions to such personal property installed at the expense of Tenant, other than any items included within the definition of Proprietary Information.