Storage Materials Sample Clauses

Storage Materials. The storage material chosen to be implemented in the cold storage validation unit is CrodaTherm 5. It is a bio- based water insoluble organic phase change material (PCM) derived from plant-based feedstocks. The exact information on the type of materials, concentrations of the mixtures and the technical characteristics are difficultly accessible mainly due to that every manufacturer uses its own additives in the mixtures and that the mixtures are not disclosed due to confidentiality issues. According to “Phase-Change Materials for Vaccine Cold Chain Applications – Summary Report”, issued by PATH in December 20161, CrodaTherm 5 has no human health hazards but it is toxic to aquatic life, and must be disposed in accordance with local regulations. Finally, as indicated, the product should not be allowed to enter drains, water courses, or the soil. According to the literature available, there is one main Life Cycle Analysis (LCA) study published and available which investigates the impact of a bio-based (wood-based) PCM included in a bio-based insulating panel2. The objective of this study is to analyze the environmental impact of a wood-based panel with PCM within the panel. The panel is installed in a wall of a building. This panel consists of three layers including a Medium Density Fiberboard (MDF) and a high-density fiberboard (HDF) panel, as well as a PCM, encapsulated within a plastic bag. The wood based PCM is translated within the inventory phase of the LCA as Fatty Acid (0.336 kg) which has a correspondence in the database used in the study. The following Table 2-1 reports the impact values of the PCM. Table 2-1 Impact Assessment Extrapolated for the PCM Damage category PCM IMPACT2002+ Human health (Disability- Adjusted Life Years, XXXX) 1.9 x 10-6 Ecosystem quality (Potentially Disappeared Fraction, PDF.m2.y) 4 Climate change (kg CO2-eq) 1.1 Resources (MJ primary) 10.4 ReCiPe Human health (XXXX) 3.7 x 10-6 Ecosystems (PDF.m2.y) 1.8 Resources ($) 0.1 With respect to the damage to human health, the phase change materials (in this case, lauric and capric acids) exhibit a large share of contribution, followed by the resourcing used in heating (not shown in the table above). Lauric acid and capric acid are PCMs with a low temperature latent heat storage owing to their low carbon chains and are used in building walls for energy storage purpose. Among the inputs, the PCM together with 1 PATH. Phase-Change Materials for Vaccine Cold Chain Applications: Summar...
Sample 1
AutoNDA by SimpleDocs

Related to Storage Materials

  • Stored Materials The Department shall not be required to pay for materials stored at the site or stored at other locations absent prior written authorization to do so, which authorization may be withheld at the Department's sole discretion. If the Department expressly agrees to pay for materials stored at the site but not yet incorporated into the Work, the Application for Payment may also include a request for payment of the cost of such materials, if the materials have been delivered to the site, and suitably stored. Such requests shall be documented by appropriate invoices and bills of sale. Payment for stored materials shall be conditioned also on the Design-Builder’s representation that it has inspected the material and found it to be free from defect and otherwise in conformity with this Agreement, and on satisfactory evidence that the materials are insured under the builder’s risk policy. Further, if the Design-Builder requests the Department to allow payments for storage of materials offsite, the Design-Builder shall be required, inter alia, to agree to execution of proper documentation to afford the Department a secured interest in the materials upon payment.

  • Customer Materials 11.1. The Supplier including any of its employees, agents, consultants, contractors and any third party shall:

  • Licensed Materials The materials that are the subject of this Agreement are set forth in Appendix A ("Licensed Materials").

  • Time and Materials If this contract is designated as a Time and Materials contract, invoicing and payment shall be as follows:

  • Storage of Materials Borrower shall cause all materials supplied for or intended to be utilized in the construction of the Improvements but not affixed to or incorporated into the Property to be stored on the Property or at such other location as may be approved by Lender in writing, with adequate safeguards to prevent loss, theft, damage or commingling with other materials not intended to be utilized in the construction of the Improvements.

  • Instructional Materials A. The Board recognizes that appropriate texts, library reference facilities, maps and globes, laboratory equipment, audio-visual equipment, art supplies, athletic equipment, current periodicals, standard tests and questionnaires, computers, and similar materials are the tools of the teaching profession.

  • Course Materials The adoption of any course materials, print or electronic, after a Course Agreement is signed will require an agreed and signed addendum.

  • Training Materials Training Materials will be provided for each student. Training Materials may be used only for either (i) the individual student’s reference during Boeing provided training and for review thereafter or (ii) Customer’s provision of training to individuals directly employed by the Customer.

  • Operator Materials Operator retains all right, title and interest in and to any and all of Operator’s software, materials, tools, forms, documentation, training and implementation materials and intellectual property (“Operator Materials”). Operator grants to the LEA a personal, nonexclusive license to use the Operator Materials for its own non-commercial, incidental use as set forth in the Service Agreement. Operator represents that it has all intellectual property rights necessary to enter into and perform its obligations in this DPA and the Service Agreement, warrants to the District that the District will have use of any intellectual property contemplated by the Service Agreement free and clear of claims of any nature by any third Party including, without limitation, copyright or patent infringement claims, and agrees to indemnify the District for any related claims.

  • Samples Physical examples of materials, equipment, or workmanship that are representative of some portion of the Work and that establish the standards by which such portion of the Work will be judged. The Contractor shall furnish for approval all samples required by the Contract Documents. The Work shall be in accordance with approved samples.

Time is Money Join Law Insider Premium to draft better contracts faster.