Hazard Analysis. A hazard analysis consists of identifying, screening and profiling each hazard. To complete the step of hazard identification and screening URS will: ▪ Illustrate how hazards were chosen for inclusion in the MHMP Update; inclusion will be based upon the following questions: ⯈ Is the hazard included in the 2008 MHMP? ⯈ Is the hazard included in the County’s General Plan? ⯈ Has the hazard occurred in the County and been associated with recent State and Presidential declarations? ⯈ Is the hazard identified in the 2010 California Multi-Hazard State Mitigation Plan? A hazard profile discusses the nature, history, location, extent and probability of future events for each hazard. To complete hazard profiles for each identified hazard URS will: ▪ Explain the nature of each hazard in general ▪ Note the locations of Mendocino County that are susceptible to each hazard ▪ Discuss the history of each hazard in Mendocino County, ensuring all history since the 2008 MHMP is captured ▪ Address the extent to which each hazard can affect the County ▪ Discuss the percent probability of each hazard occurring in Mendocino County’s future, based upon historical occurrences and/or relevant studies ▪ Develop/update hazard maps which illustrate historical and projected occurrences, and extent, when applicable
Hazard Analysis. Accident Hazard Cause
Hazard Analysis. Subcontractor shall prepare a Task or Activity Hazard Analysis (THA/AHA) or equivalent for each Project phase comprising Subcontractor’s Work identifying the work sequence, hazards posed and control measures required to perform the activity according to accepted industry safe work practices. The equipment, tools and materials, inspection and training requirements to execute Subcontractor’s Work activity shall also be included in the THA/AHA. The THA/AHA must be readily available for review by CH2M HILL upon request.
Hazard Analysis. A danger is a situation that can lead to a negative impact. This negative impact of a hazard can affect people, objects, or the environment. Emergency measures are only effective if it is clearly defined against which dangers they should act. To determine how to respond to an emergency, the most important threats need to be identified first. The identification of possible risks and vulnerabilities is an essential basis for emergency preparedness. There are two types of hazards: General hazards Specific hazards related to the geothermal project: The drilling company (ITAG) has recorded various drilling-specific hazards in its own HSE document. Figure 18 shows some drilling-related hazards. Figure 18. Possible events in the drilling site which trigger emergency measures
Hazard Analysis. (a) Is this undertaken?
Hazard Analysis. The Contractor shall submit a Hazard Analysis prior to commencing the works under the Contract. The Council has identified risks associated with this Contract as follows: Activity Hazard Cooking - Stove/Oven Xxxxx & Scalds Food Preparation Spillage on Floor causing Slips Food Preparation Cut fingers Food Storage Incorrect Temperature Manual Handling Back/muscle strain A risk is the possibility that personal injury, property loss or environmental harm will occur when working with or near a hazard. The goal of hazard analysis is to find ways to minimise the chance of injury, loss or harm.
Hazard Analysis. The purpose of the hazard analysis is to analyse possible hazards that can occur when the functions provided by the cruise control system are used by the driver in order to derive safety requirements for the system which can then be proved in the formal specification using Event-B. To systematically analyze possible hazards and to identify safety requirements the following process is used:
Hazard Analysis. Figure 4.3: Hierarchy of problem diagrams for cruise control system.
Hazard Analysis. The DOC’s Safety Officer or designee will conduct a work site Job Hazard Analysis prior to DOC approval of the Work Order. DOC may conduct periodic Site Inspections during the course of the Work Order. A copy of the Job Hazard Analysis Report (Exhibit B) and Site Inspection (Exhibit C) may be provided to Tillamook County Parks upon request after completion of the assessment and/or inspection. If DOC’s representative believes the work site or any of the working conditions pose an increased risk to worker health or safety, the DOC concerns shall be resolved by the parties prior to the commencement of work. The Hazard Assessment Report and any addenda or other reports regarding the work site and working conditions shall be incorporated in and made a part of the Work Order.
Hazard Analysis. Contractor has a continuing responsibility to identify and xxxxx hazardous conditions in the Rec Area and Marina Operations which could affect Rec Area improvements, Marina Operations or pose a risk of injury to individuals or property. Except in emergency situations, any actions to xxxxx such hazards shall be performed after consultation with the River District.
