Construction and Operations and Maintenance Sample Clauses

Construction and Operations and Maintenance. Contract for the Sale of Power Generation Equipment and Related Services between ______and Seller Generator Interconnection Agreement Retail Electric Service Agreement Proof of Insurance Construction Agreements: Balance of Plant/Construction Services Agreement Operations and Maintenance Agreements: Warranty, Service and Maintenance Agreement SUCH LIST MAY BE UPDATED PURSUANT TO SECTION 3.2.3 EXHIBIT 3.2.5 LEASES EXHIBIT 4.6(1) GREEN TAG ATTESTATION AND BILL OF SALE EXHIBIT 4.6(2) QUALIFIED REPORTING ENTITY SERVICES AGREEMENT
Sample 1Sample 2Sample 3See All (7)
AutoNDA by SimpleDocs
Construction and Operations and Maintenance. Contract to engineer, procure and construct the Facility between juwi solar Inc. (or its affiliate) and Seller Engineering and Procurement contract between Seller and Interconnection Provider Retail Electric Service Agreement Proof of Insurance
Sample 1Sample 2Sample 3
Construction and Operations and Maintenance. Contract for the Sale of Power Generation Equipment and Related Services between Engineering, Procurement and Construction Firm and Seller Generator Interconnection Agreement – Interconnection Agreement with PacifiCorp to be obtained. Retail Electric Service Agreement – Service request will be submitted upon execution of PPA. UAMPS/RMP Proof of Insurance – Certificates of Insurance to be provided prior to activity, construction or operations. Construction Agreements: Balance of Plant/Construction Services Agreement – Contracts to be obtained when required. Operations and Maintenance Agreements: Warranty, Service and Maintenance Agreement – Warranties and Agreements shall be obtained prior to Facility operations. SUCH LIST MAY BE UPDATED PURSUANT TO SECTION 3.2.3 EXHIBIT 3.2.6 LEASES EXHIBIT 5.1 CONTRACT PRICE Prices shown in $ per MWh. CONFIDENTIAL – SUBJECT TO UTAH PUBLIC SERVICE COMMISSION RULE 000-000-00 EXHIBIT 5.1.1 SCALING FACTOR CONFIDENTIAL – SUBJECT TO UTAH PUBLIC SERVICE COMMISSION RULE 000-000-00 EXHIBIT 6.1 Description of Seller’s Facility Seller’s Facility consists of Approximately panels rated between manufactured by the Facility includes: inverters manufactured by , and a More specifically, Manufacturer’s Nameplate Data: A. Solar Panels Manufacturer: Inverters Mounting DMEAST #17772999 v6 . Project Description Location Location of the Facility: Parowan , Utah in the _ quarter of the quarter of S , T S, R W, The site is an approximately a 650 acre site located near the Town of Parowan , Utah. EXHIBIT 6.1 — Attachments
Sample 1
Construction and Operations and Maintenance. Contract for the Sale of Power Generation Equipment and Related Services between and Seller Generator Interconnection Agreement Retail Electric Service Agreement Proof of Insurance Construction Agreements: Balance of Plant/Construction Services Agreement Operations and Maintenance Agreements: Warranty, Service and Maintenance Agreement SUCH LIST MAY BE UPDATED PURSUANT TO SECTION 3.2.3 EXHIBIT 3.2.5 - LEASES HAVE BEEN REDACTED EXHIBIT 4.6 QUALIFIED REPORTING ENTITY SERVICES AGREEMENT C & T Master v2.2a; 032613 This Qualified Reporting Entity Services Agreement (this “Agreement”) is entered into by and between PacifiCorp ("PacifiCorp") and (“Counterparty”; PacifiCorp and Counterparty may be referred to individually herein as "Party" and collectively as “Parties”) as of the date signed by both Parties with reference to the following:
Sample 1
Construction and Operations and Maintenance. Contract for the Sale of Power Generation Equipment and Related Services between ______and Seller Generator Interconnection Agreement Retail Electric Service Agreement Proof of Insurance Construction Agreements: Balance of Plant/Construction Services Agreement Operations and Maintenance Agreements: Warranty, Service and Maintenance Agreement SUCH LIST MAY BE UPDATED PURSUANT TO SECTION 3.2.3 EXHIBIT 4.6(1) GREEN TAG ATTESTATION AND BILL OF SALE [Form provided by Purchaser] EXHIBIT 4.6(2) QUALIFIED REPORTING ENTITY SERVICES AGREEMENT [Form provided by Purchaser] EXHIBIT 5.1 CONTRACT PRICE EXHIBIT 6.1 Description of Seller’s Facility [Provided by Seller]
Sample 1
Construction and Operations and Maintenance. Contract for the Sale of Power Generation Equipment and Related Services between Vestas and Seller Large Generator Interconnection between Seller and Transmission Provider Retail Electric Service Agreement Proof of Insurance Construction Agreements: Balance of Plant/Construction Services Agreement Large Generator Interconnection Agreement Operations and Maintenance Agreements: Warranty, Service and Maintenance Agreement SUCH LIST MAY BE UPDATED PURSUANT TO SECTION 3.2.5 EXHIBIT 3.2.8 WIND LEASES EXHIBIT 4.6 GREEN TAG ATTESTATION AND XXXX OF SALE ("Seller") hereby sells, transfers and delivers to PacifiCorp the Green Tags (including all Environmental Attributes and Green Tag Reporting Rights) associated with the generation of Net Output under the Power Purchase Agreement (Renewable Energy) between Seller and PacifiCorp dated [ ] (the "PPA"), as described below, in the amount of one Green Tag for each megawatt hour generated. Defined terms used in this Green Tag Attestation and Xxxx of Sale (as indicated by initial capitalization) shall have the meaning set forth in the PPA. Facility name and location: Fuel Type: Capacity (MW): Energy Admin. ID no.: Operational Date: Dates MWh generated Seller further attests, warrants and represents, under penalty of perjury, as follows:
Sample 1

Related to Construction and Operations and Maintenance

  • Operations and Maintenance Pursuant to Section 10.5 of this Agreement, Developer shall pay the reasonable expenses (including overheads) for the operation, maintenance, repair and replacement of Transmission Owner’s Attachment Facilities and incremental operating and maintenance expenses incurred in association with System Upgrade Facilities, if and to the extent provided for under Attachment S. For Transmission Owner’s Attachment Facilities, such expenses are calculated as follows:

  • Operation and Maintenance 17.1 O&M obligations of the Concessionaire

  • Construction and Maintenance There are on-going maintenance, renovation and construction projects taking place in and around the residences. The work typically takes place during regular business hours, but may begin earlier or extend into evenings or weekends. On-going construction or renovation projects will continue through midterm and final exam periods. The University will take measures to ensure that prudent construction practices are followed, but there may be noise, dust and temporary interruption of some services. Residents may be required to temporarily or permanently relocate to facilitate construction or renovation to their residence area. There will be no compensation or reduction to your residence fees due to disruption and/or relocation.

  • Maintenance and Operation Member-Generator agrees to maintain their system and facilities in accordance with applicable manufacturer's recommended maintenance schedule and standard prudent engineering practices. Member-Generator covenants and agrees to operate their system, facilities and equipment so as to minimize the likelihood for a malfunction or other disturbance, damaging or otherwise affecting or impairing Cooperative’s electrical system. Member-Generator shall comply with all applicable laws, regulations, zoning, building codes, safety rules and other environmental regulations or restrictions applicable to the design, installation, operation and maintenance of the Member-Generator's System. Member-Generator must, at least once every year, conduct a test to confirm that Member-Generator’s System automatically ceases to energize the output (interconnection equipment output voltage goes to zero) within two (2) seconds of being disconnected from Cooperative’s electrical system. Disconnecting the Member-Generator’s System from Cooperative’s electrical system at the visible disconnect switch and measuring the time required for the unit to cease to energize the output shall satisfy this test. Member-Generator shall maintain a record of the results of these tests and, upon request by Cooperative, shall provide a copy of the test results to Cooperative. If Member-Generator is unable to provide a copy of the test results upon request, Cooperative shall notify Member- Generator by mail that Member-Generator has thirty (30) days from the date Member-Generator receives the request to provide Cooperative with the results of a test. If Member-Generator does not provide Cooperative with the test results within the thirty (30) day time period or if the test results provided to Cooperative show that Member-Generator’s net metering unit is not functioning correctly, Cooperative may immediately disconnect Member-Generator’s System from Cooperative’s electrical system. If Member-Generator’s equipment ever fails this test, Member-Generator shall immediately disconnect Member-Generator’s System from Cooperative's electrical system. Member-Generator’s System shall not be reconnected to Cooperative's electrical system by the Member-Generator until Member-Generator’s System is repaired and operating in a normal and safe manner. Cooperative shall have the right to have a representative present and informed when any such tests are conducted. Cooperative does not warrant the testing procedures or results by the presence of its representative. Member-Generator is responsible for protecting their equipment from transient high voltage spikes caused by lightning and/or transient low voltage conditions caused by faults or short circuits, and from any other causes or events. Therefore, Cooperative shall not be responsible for damage to Member-Generator’s equipment allegedly caused by transient high voltage spikes caused by lightning and/or transient low voltage conditions caused by faults or short circuits or other causes or events. Member-Generator agrees to notify Cooperative no less than thirty (30) days prior to modification of the components or design of the Member-Generator’s System that in any way may degrade or significantly alter the System’s output characteristics. Member-Generator acknowledges that any such modifications will require submission of a new Application and Agreement to Cooperative.

  • Repair and Maintenance Except in the case of damage to or destruction of the Leased Premises, the Building, the Outside Areas or the Property caused by an act of God or other peril, in which case the provisions of Article 10 shall control, the parties shall have the following obligations and responsibilities with respect to the repair and maintenance of the Leased Premises, the Building, the Outside Areas, and the Property.

  • Repairs and Maintenance The Tenant shall (a) take good care of the Apartment and all equipment and fixtures in it; (b) promptly make all necessary repairs and replacements whenever the need results from the Tenant's act of neglect or the neglect of Tenant’s family members, guests, visitors or contractors (if consented to by Landlord); (c) keep the Apartment and any other part of the building used by the Tenant as clean and safe as possible; and (d) promptly notify the Landlord when there are conditions which need repair. Landlord shall have a reasonable amount of time to make repairs. Tenant shall be responsible for reimbursing the Landlord for the cost of any repairs that are not "normal wear and tear" repairs, any such costs shall be considered additional rent; (e) shall not attach to, hang from or place anything on the railings of the patio or deck; and ( f ) Tenant agrees not to install any partition walls. No outside contractor is authorized to perform any services at the Apartment or apartment complex unless approved in writing by a representative of the Landlord. If Tenant contracts for any such services without written consent of the Landlord, Tenant shall be wholly responsible for the payment for any such service and shall hold the Landlord harmless against any claim made by a contractor who performs any such service at the request of the Tenant. Tenant shall also be responsible for returning the apartment back to its original condition, or else shall be liable to the Landlord for the costs incurred for the Landlord to do so after Tenant vacates.

  • Operations and Maintenance Notice Each Party shall notify the other Parties in writing of the identity of the person(s) that it designates as the point(s) of contact with respect to the implementation of Articles 9 and 10.

  • Installation and Maintenance Except for the bi‐directional and production metering equipment owned by the City, all equipment on Customer’s side of the delivery point, including the required disconnect device, shall be provided and maintained in satisfactory operating condition by Customer and shall remain the property and responsibility of the Customer. The City will bear no responsibility for the installation or maintenance of Customer’s equipment or for any damage to property as a result of any failure or malfunction thereof. The City shall not be liable, directly or indirectly for permitting or continuing to allow the interconnection of the Facility or for the acts or omissions of Customer or the failure or malfunction of any equipment of Customer that causes loss or injury, including death, to any party.

  • Project Maintenance The Local Government shall be responsible for maintenance of locally owned roads and locally owned facilities after completion of the work. The State shall be responsible for maintenance of the state highway system after completion of the work if the work was on the state highway system, unless otherwise provided for in existing maintenance agreements with the Local Government.

  • Routine Maintenance, Construction, and Repair The NYISO or Connecting Transmission Owner may interrupt interconnection service or curtail the output of the Small Generating Facility and temporarily disconnect the Small Generating Facility from the New York State Transmission System or Distribution System when necessary for routine maintenance, construction, and repairs on the New York State Transmission System or Distribution System. The NYISO or the Connecting Transmission Owner shall provide the Interconnection Customer with five Business Days notice prior to such interruption. The NYISO and Connecting Transmission Owner shall use Reasonable Efforts to coordinate such reduction or temporary disconnection with the Interconnection Customer.

Time is Money Join Law Insider Premium to draft better contracts faster.