Load Shedding The Distributor may carry out Load Shedding in the following circumstances:
GARBAGE DISPOSAL, RECYCLING, AND BIODEGRADABLE MATERIALS A. Concessionaire shall be responsible for maintaining the cleanliness of the Concession Premises. Concessionaire shall ensure placement of all garbage and trash generated by the Concession Operation in designated containers and that said containers are emptied daily, or as more frequently required by Department, at a location within the Area designated by Department. Disposal costs from this latter location shall be borne by Department. Concessionaire shall provide such additional trash containers as may be required to keep the immediate Concession Premises clean at all times. The type of trash containers provided by Concessionaire shall be approved by Department prior to use.
Packing 9.1 The supplier shall provide such packing of the goods as is required to prevent their damage or deterioration during transit to their final destination, as indicated in the contract. The packing shall be sufficient to withstand, without limitation, rough handling during transit and exposure to extreme temperatures, salt and precipitation during transit, and open storage. Packing, case size and weights shall take into consideration, where appropriate, the remoteness of the goods’ final destination and the absence of heavy handling facilities at all points in transit.
Packing List A packing list or other suitable shipping document shall accompany each shipment and shall indicate:
Balance Sheet “Balance Sheet” is defined in Section 3.6 of the Agreement.
FABRICATION Making up data or results and recording or reporting them.
Spreadsheet The Company will cause to be prepared and delivered to Parent, at least five Business Days before the Closing, a spreadsheet, in a form reasonably acceptable to Parent and the Payment Agent, dated and setting forth as of the Closing the following information relating to the holders of Company Units, other securities convertible into Company Units, Company Options, Company RSUs, Retention RSUs and Company Restricted Units: (a) the names and addresses (including email addresses), to the extent practicable, of all such holders; (b) the number and type of Company Units or other securities held by, or subject to the Company Options, Company RSUs, Retention RSUs or Company Restricted Units held by, such Persons; (c) the exercise price per unit in effect as of the Closing Date for each Company Option; (d) the conversion price per unit in effect as of the Closing Date for any securities that are convertible into Company Units and the type of Company Units into which the securities are convertible; (e) the cash amount payable to such holder in respect of the cancellation of such holder’s Company Units and In-the-Money Vested Options or other securities pursuant to Section 1.4 or Section 1.6; (f) the Unit General Escrow Contribution, Unit Litigation Escrow Contribution, Unit Representative Fund Contribution, Option General Escrow Contribution, Option Representative Fund Contribution, Aggregate Escrow Funding Percentage and Unit Litigation Funding Percentage of each Indemnifying Securityholder and Indemnifying Founder, as applicable (together with each Indemnifying Securityholder’s Unit Escrow Funding Percentage, Option Escrow Funding Percentage, and each Indemnifying Founder’s Unit Litigation Funding Percentage, separately listed); (g) whether a Person is an Installment Party and if so, such Person’s Unit Installment Amount; (h) the number of shares of Parent Common Stock underlying each holder’s Substitute Options and Replacement RSUs, (i) the amount of the applicable required Tax withholdings as of the date the Spreadsheet is provided attributable to each holder of Company Units, Company Options, Company RSUs, Retention RSUs and Company Restricted Units; (j) the aggregate amount of all outgoing wires to the Payment Agent, the Company and any of its Subsidiaries in respect of payments to be made to holders of Company Units and In-The-Money Vested Options, as applicable, the Escrow Agent and any third-party in respect of the payment of Third Party Expenses; and (k) such other information relevant thereto or which Parent may reasonably request at least five Business Days before the Closing Date (the “Spreadsheet”).
Film Children shall be restricted from viewing age-restricted films classified according to the recommendations of the British Board of Film Classification. Hirers should ensure that they have the appropriate copyright licences for film.
Test equipment For the tests an inertia dynamometer shall be equipped with the vehicle brake in question. The dynamometer shall be instrumented for continuous recording of rotational speed, brake torque, pressure in the brake line, number of rotations after brake application, braking time and brake rotor temperature.
Scratches (Q) appliance malfunctions and any resultant leak there from; (R) any stain, soiling or damage resulting from everyday use or which has built up over time, e.g. hair, body or suntan oils and/or lotions; (S) signs of soiling include darkened areas where the body comes into contact with the furniture (these darkened areas are signs of soil build-up, which is not covered); (T) general maintenance and overall cleaning of the furniture is the consumer’s responsibility; (U) damage due to harsh or corrosive chemicals; (V) acids, including without limitation, dyes and inks (except ballpoint), plant food and fertilizer and bleach, gum; (W) any non-operating part or decorative parts such as hinges, knobs, handles, or shelves; (X) coverage under another insurance program; (Y) delivery and/or redelivery and/or loss or damage to the Covered Product while in the course of transit; (Z) design deficiency; (AA) fabrics with “X” cleaning codes and non-colorfast fabrics and leathers; (AB) odors; (AC) variation of the color, or graining of wood or wood products, marble or leather; (AD) split leathers used in seat cushions, back cushions or top or inside arm areas; (AE) natural markings on leather, such as, healed scars, insect bites, brand marks or wrinkles, or suede, and leathers with embossed patterns other than those stimulating natural cowhide; (AF) non- bovine leathers, and other buffed leathers; (AG) stains, color loss or damage resulting from cleaning methods or products (detergents, abrasives or other harsh cleaning agents) other than those recommended by the furniture manufacturer; (AH) stone or sand abrasion; (AI) loss or damage resulting from: pre-existing conditions known to You; (AJ) wear related issues, such as but not limited to, fading, wear, seam separation, stress tears, loss of foam resiliency, pilling or fraying of any fabric on all types of furniture; (AK) color loss or cracking and peeling on any leather or vinyl; (AL) splits or bi-cast leather; (AM) furniture that is used for commercial, institutional, outdoor or rental purposes; (AN) Customer’s Own Material furniture; (AO) wicker, rattan, and teakwood furniture; (AP) massage chairs; (AQ) stains or damage to suede, split-grain leather hide or exotic leathers; (AR) manufacturer quality issues such as stress tears, fabric flaws, fading, color loss or change, loss of foam or resiliency, cracking and peeling of leather or vinyl, natural leather markings, and defects in design and workmanship; (AS) Stains or damage that occur during assembly, delivery, installation, before furniture is delivered to your residence, while the furniture is located outside of your residence, while the furniture is in storage or being moved to or from storage or between residences; (AT) Wear & Tear caused by repeated use such as scuffing, soiling, hair/body oil, perspiration, surface abrasions, pilling or fraying of fabric, loose joints; (AU) Stains or damage covered under any manufacturer warranty, recall, homeowner, renter or other insurance policy; (AV) Stains or damage caused by structural problems, appliance malfunctions, Acts of God or natural disasters, theft, vandalism or illegal activity (AW) Stains or damage caused by independent contractors Specific to Home Automation: In additional to the exclusions listed above, this Agreement does not cover any loss, repairs or damage caused by or resulting from: (A) pre-existing conditions incurred or known to you (pre-existing means a condition prior to Plan issuance); (B) any repair covered by a manufacturer’s warranty or any insurance; (C) installation, or improper installation; or improper installation of customer replaceable components, modules, parts or peripherals; (D) damage or failure due to causes beyond our control such as environmental conditions, exposure to weather conditions or acts of nature including, but not limited to: fire, floods, smoke, sand, dirt, lightning, moisture, water damage, freezes, storms, wind, windstorm, hail, earthquake, animal or insect infestation, etc.; (E) damage or failure caused by riot, nuclear radiation, war, hostile action, or radioactive contamination, etc.; (F) battery failure or leakage; (G) collision, collapse, or explosion; (H) liquid spillage of any kind; (I) signal reception, transmission problems resulting from external causes, interruption of electrical service, loss of power, improper use of electrical/power, power “brown-out”, power overload or power surge (unless covered in the Special Features section of this document); (J) neglect, misuse, abuse, intentional damage, malicious mischief, theft, mysterious disappearance, vandalism or accidental damage; damage cause by dropping (K) rust, corrosion, warping, bending, etc.; (L) damage, warping, bending or rusting of any kind to the housing, cabinetry, outside casing or frame of the product; (M) any non-operating part, including but not limited to plastic, or decorative parts such as hinges, knobs, door liners, glass, handles, masks, rack rollers, shelves, etc.; (N) loss of or repair to components within the product not originally covered by the manufacturer’s warranty; (O) failure to product attachments not provided by the manufacturer or included in the original sale;