Chevrons Sample Clauses

Chevrons. After paragraph 45 insert the following paragraphs 46 to 49 inclusive: Units 46 The unit of measurement shall be: (i) flexible chevrons linear metre. Measurement 47 Measurement shall be the horizontal length of the complete chevron installation. Itemisation 48 Separate items shall be provided for flexible chevrons in accordance with Chapter II paragraphs 3 and 4 and the following: Group Feature I 1 Passively safe RA2 retroreflective rebound chevrons to BS EN 12767. II 1 Different heights of chevron symbol. Chevrons 49 The items for flexible chevrons shall in accordance with the Preambles to Schedule of Rates and Prices General Directions include for: Item coverage (a) traffic signs faces (as this Series paragraph 4); (b) traffic sign posts (as this Series paragraph 5D); (c) traffic sign bases (as this Series paragraph 5H). Series 1300: Road Lighting Columns, Brackets, CCTV Masts & Cantilever Masts Road Lighting Columns, Brackets, Wall Mountings, CCTV Masts & Cantilever Masts Above paragraph 1 insert the following paragraph 0: Definitions 0 'Passively Safe Lighting Columns' refers to columns compliant with BS EN 12767. Delete paragraphs 2 and 3, and insert the following paragraphs 2 and 3: Measurement 2 The measurement of road lighting columns and brackets, wall mountings, CCTV masts and cantilever masts shall be the complete installation except for earth electrodes which shall be measured separately (under Series 1400 paragraphs 24 to 27) and LED components and installation of luminaires which shall be measured separately (under this Series paragraphs 8 to 14). Itemisation 3 Separate items shall be provided for road lighting columns and brackets, wall mountings, CCTV masts and cantilever masts in accordance with Chapter II paragraphs 3 and 4 and the following: Group Feature I 1 Passively safe road lighting columns. II 1 2 Not exceeding 10 metres nominal height. Exceeding 10m but not exceeding 15m nominal height. III 1 Different types of base. IV 1 Single bracket. Road Lighting Columns, Brackets, Wall Mountings, CCTV Masts & Cantilever Masts 4 In paragraph 4 after (ff) insert the following (gg) to (ii) inclusive: Item coverage (gg) marking and lettering; (hh) conspicuity banding; (ii) terminations. After paragraph 7 insert the following paragraphs 8 to 11: LED Components for Lighting Units 8 The units of measurement shall be: (i) invoiced costs of LED components, including LED luminaires, LED array, LED DALI compatible and enabled driver, complete with nece...
Sample 1Sample 2
AutoNDA by SimpleDocs
Chevrons. After paragraph 45 insert the following paragraphs 46 to 53
Sample 1Sample 2
Chevrons. Rear facing vertical surfaces will be covered with alternating stripes of reflective material specified by the Purchaser. The Purchaser will specify which surfaces will be covered.
Sample 1
Chevrons d. Product label in the centre of the clear front of the outer pouch such that the product itself is not obscured.
Sample 1

Related to Chevrons

  • PRODUCER Provide the producer’s name, address (including country), e-mail address, and telephone number, if different from the certifier or exporter or, if there are multiple producers, state “Various” or provide a list of producers. A person who wishes for this information to remain confidential may state “Available upon request by the importing authorities”. The address of a producer shall be the place of production of the good in a Party’s territory.

  • Supplier A manufacturer, fabricator, distributor, supplier, or vendor of goods or equipment in connection with the Work, or any other party having a Contract or Purchase Order with the Contractor or with a Subcontractor to furnish materials or equipment to be incorporated in the Work by the Contractor or a Subcontractor.

  • Distributor The Distributor represents and warrants that: (i) the Distributor is a limited partnership duly organized and in good standing under New York law; (ii) the Distributor is registered as a broker-dealer under federal and applicable state securities laws and is a member of the NASD; and (iii) the Distributor is registered as an investment adviser under federal securities laws.

  • End Users Customer will control access to and use of the Products by End Users and is responsible for any use of the Products that does not comply with this Agreement.

  • Shipments The Vendor shall ship, deliver or provide ordered products or services within a commercially reasonable time after the receipt of the order from the TIPS Member. If a delay in said delivery is anticipated, the Vendor shall notify TIPS Member as to why delivery is delayed and shall provide an estimated time for completion of the order. TIPS or the requesting entity may cancel the order if estimated delivery time is not acceptable or not as agreed by the parties.

  • Fuel 28.1 The Vehicle must be returned with the amount of fuel equal to that at the time of the commencement of the rental. If the Vehicle is returned with less fuel, the difference will be charged to You at a rate of $5.00 including GST per litre (which includes a service component).

  • Operator The Optionee shall be the operator for purposes of developing and executing exploration programs.

  • Distributors In addition to direct sales to Clients, Supplier grants Accenture: (i) the right to resell Products and Services to a third-party distributor (“Distributor”) for resale to Client or to a financing company for leasing to Client.

  • Loading RPMG shall schedule the loading and shipping of all outbound corn oil purchased hereunder, but all labor and equipment necessary to load trucks and rail cars and other associated costs shall be supplied and borne by Producer without charge to RPMG. Producer shall handle the corn oil in a good and workmanlike manner in accordance with RPMG’s written requirements and normal industry practice. Producer shall maintain the truck and rail loading facilities in safe operating condition in accordance with normal industry standards and shall visually inspect all trucks and rail cars to assure (i) cleanliness so as to avoid contamination, and (ii) that such trucks and railcars are in a condition suitable for transporting the corn oil. RPMG and RPMG’s agents shall have adequate access to the Ethanol Facility to load Producer’s corn oil on an industry standard basis that allows RPMG to economically market Producer’s corn oil. RPMG’s employees shall follow all reasonable safety rules and procedures promulgated by Producer and provided to RPMG reasonably in advance and in writing. Producer shall supply product description tags, certificates of analysis, bills of lading and/or material safety data sheets that are applicable to all shipments. In the event that Producer fails to provide the labor, equipment and facilities necessary to meet RPMG’s loading schedule, Producer shall be responsible for all costs and expenses, including without limitation actual demurrage and wait time, incurred by RPMG resulting from or arising in connection with Producer’s failure to do so.

Time is Money Join Law Insider Premium to draft better contracts faster.