Company Tooling definition

Company Tooling shall have the meaning set forth in Section 10.1.
Sample 1Sample 2Sample 3
Company Tooling shall have the meaning set forth in Section 10.1. 1.14 “Company Quarter End” means Company’s fiscal calendar which follows the 4-4-5 week format identified in Schedule 6, which Schedule shall be updated by Company on an annual basis on or before December 1st. 1.15 “Competitor Product” shall have the meaning set forth in Section 18. 1.16 “Compliance Certification” shall have the meaning set forth in Section 3.7.1. 1.17 “Components” means those Assigned Components, Generic Components, and Consigned Components. 1.18 “Consigned Components” means those components that are provided by or on behalf of Company, to Jabil, at Company’s expense for assembly into Products, including those Components or materials specifically identified in writing by Company as “consigned.” 1.19 “Defect” shall have the meaning set forth in Section 5.4. 1.20 “Deliverable” shall mean an item specified as a deliverable in a SOW corresponding to Additional Services provided by Jabil. 1.21 “EDI” shall mean electronic data interchange. 1.22 “Effective Date” shall mean the date upon which the terms and conditions of this Agreement shall become effective by and between the Parties. The Parties have agreed that the Effective Date of this Agreement shall be the late date of execution on the signature page to this Agreement. 1.23 “Encumbrance” means any encumbrance, lien, charge, hypothecation, pledge, mortgage, title retention agreement, security interest of any nature, adverse claim, exception, right of set-off, any matter capable of registration against title, option, right of pre-emption, privilege or any contract to create any of the foregoing. Portions of this Exhibit were omitted and have been filed separately with the Secretary of the Commission pursuant to the Company’s application requesting confidential treatment under Rule 24b-2 of the Exchange Act — [*] denotes omissions.
Sample 1

Examples of Company Tooling in a sentence

  • Jabil may manufacture, have manufactured, and use the Company Tooling only to perform the Manufacturing Services under the Agreement and shall use and treat the Company Tooling with a high degree of care, and in any case no less than the same degree of care it would for its own equipment, tooling, molds or supplies.

  • Jabil shall execute documents and take such further action as Company shall reasonably request to protect Company’s interest in the Company Tooling.

  • Jabil shall attach an identifying label showing Company’s ownership in a conspicuous place on each unit of Company Tooling, if possible, and shall secure and segregate the Company Tooling in such fashion to clearly identify the Company Tooling as the property of Company.

  • Jabil shall maintain the Company Tooling, at its own expense, in efficient working order and good repair based on reasonable wear and use, and otherwise in accordance with Company’s instructions.

  • Jabil shall keep all Company Tooling free of any Encumbrances, and shall not transfer any Company Tooling, or any rights in the Company Tooling to any Person.

  • Carry out as required and maintain the control of all Company Tooling and process all packing and dispatch of rotable components.

  • Jabil shall deliver all Company Tooling to Company or Company’s designee, or at Company’s request, make available for pickup, upon the termination or expiration of this Agreement, or upon Company’s earlier request.

  • All Company Tooling shall at all times remain the property of the Company, and the Customer shall have no right, title or interest in or to any Company Tooling (save the right to possession [and use] of the Company Tooling subject to these Conditions).

  • Of Timken Company, Tooling & Production, December 1985 [18]“Cryogenic Applications in Metallurgy and Related Fields”, Torsten Holm and K.A. Orrebo, AGA Internal Report [19]H.

  • Company Tooling shall remain at the sole risk of the Customer for the period during which the Company Tooling is in the possession, custody or control of the Customer (or such third party on its behalf) until such time as the Company Tooling is redelivered to the Company.

Related to Company Tooling

  • Tooling means tooling inventory, including but not limited to dies, molds, tooling, casting patterns, gauges, jigs, racks and stands for engines, cowls, radome and wheels, aircraft jacks, test benches, test equipment, lathes, welders, grinders, presses, punches and hoists and other similar items (whether or not completed or fixed or handheld).

  • Computer Hardware and Software means all of each Loan Party’s and each of its Subsidiary’s rights (including rights as licensee and lessee) with respect to (a) computer and other electronic data processing hardware, including all integrated computer systems, central processing units, memory units, display terminals, printers, computer elements, card readers, tape drives, hard and soft disk drives, cables, electrical supply hardware, generators, power equalizers, accessories, peripheral devices and other related computer hardware; (b) all software and all software programs designed for use on the computers and electronic data processing hardware described in clause (a) above, including all operating system software, utilities and application programs in whatsoever form (source code and object code in magnetic tape, disk or hard copy format or any other listings whatsoever); (c) any firmware associated with any of the foregoing; and (d) any documentation for hardware, software and firmware described in clauses (a), (b) and (c) above, including flow charts, logic diagrams, manuals, specifications, training materials, charts and pseudo codes.

  • Cloud Materials means any materials provided or developed by SAP (independently or with Provider’s cooperation) in the course of performance under the Agreement, including in the delivery of any support or Consulting Services to Provider or its Customers. Cloud Materials do not include any Customer Data, Provider Confidential Information, or the SAP Cloud Service.

  • Open-Source Components means any software component that is subject to any open-source copyright license agreement, including any GNU General Public License or GNU Library or Lesser Public License, or other obligation, restriction or license agreement that substantially conforms to the Open Source Definition as prescribed by the Open Source Initiative or otherwise may require disclosure or licensing to any third party of any source code with which such software component is used or compiled.

  • Supplier Software means software which is proprietary to the Supplier or its Affiliates which is used or supplied by the Supplier in the provision of the Services; Supplier Staff means all persons employed or engaged by the Supplier together with the Supplier's servants, agents, suppliers, consultants and Sub-Contractors (and all persons employed by any Sub-Contractor together with the Sub-Contractor’s servants, consultants, agents, suppliers and Sub-Contractors) used in the performance of its obligations under this Contract; Time and Materials means the pricing mechanism for the Services as may be agreed by the Parties and set out at paragraph Error: Reference source not found in the SOW; TUPE means the Transfer of Undertakings (Protection of Employment) Regulations 2006 (SI 2006/246) as amended or replaced or any other regulations or UK legislation implementing the Acquired Rights Directive; Velocity means the Metric which measures the total number of Story Points for Stories that have been accepted in a Sprint, indicating the rate of progress towards Acceptance of all Stories from the Product Backlog;

  • Kit means a set of components that are packaged together and intended to be used to perform a specific in vitro diagnostic examination, or a part thereof;

  • Tool means the tool developed in accordance with Section 35A-15-303.

  • HP means horsepower.

  • Manufacturer means the person or body who is responsible to the approval authority for all aspects of the type approval process and for ensuring conformity of production. It is not essential that the person or body is directly involved in all stage of the construction of the vehicle, system, component or separate technical unit which is the subject of the approval process.

  • Consumables means where the context permits, Digital Print Consumables, Inkjet Printing System Consumables and Prepress Consumables.

  • Supplier Equipment means the Supplier's hardware, computer and telecoms devices, equipment, plant, materials and such other items supplied and used by the Supplier (but not hired, leased or loaned from the Customer) in the performance of its obligations under this Call Off Contract;

  • Supported Software means the supported software identified in the Proposal. System means the designated information technology environment in which the Software is to be used. Term means the term of this Agreement specified in clause 2.

  • Supported Hardware means the hardware and platforms that are listed at (i) xxxxx://xxxxxxxx.xxxxxx.xxx and xxxx://xxx.xxxxxx.xxx/resourcelibrary/articles/enterprise-linux-virtualization-support for Red Hat Enterprise Linux, OpenShift Container Platform and Red Hat Enterprise Virtualization Subscriptions, (ii) xxxx://xxx.xxxxx.xxx/products/platforms/application/supportedconfigurations/ for Red Hat JBoss Middleware Subscriptions, and (iii) xxxxx://xxxxxx.xxxxxx.xxx/knowledge/articles/66206 for Red Hat Gluster Storage Subscriptions, (iv) xxxxx://xxxxxx.xxxxxx.xxx/products/red-hat-ceph-storage for Red Hat Ceph Storage Subscriptions and (v) xxxx://xxxx.xxxxxxx.xxx/ansible- tower/latest/html/quickinstall/prepare.html#prerequisites-and-requirements for Ansible Tower Subscriptions. “Evaluation Subscriptions” are Subscription Services provided for the sole purpose of evaluating the suitability of the Subscription Services for your future purchase from Red Hat or through one of our authorized Business Partners (“Evaluation Purposes”), and not for Production Purposes, Development Purposes or any other purpose.

  • Independent Software Vendor or “ISV” means a Person that makes available to Participants and Authorized Traders a system or platform offering smart order routing, front-end trading applications, an aggregation platform or a combination of the foregoing but that does not provide Participants or Authorized Traders with the ability to effect transactions other than through the Trading System.

  • Contractor Software means software which is proprietary to the Contractor, including software which is or will be used by the Contractor for the purposes of providing the Services.

  • Third Party Hardware means the third party hardware, if any, identified in the Investment Summary.

  • Associated equipment means equipment that is used in conjunction with a radiographic exposure device to make radiographic exposures that drives, guides, or comes in contact with the source, e.g., guide tube, control tube, control (drive) cable, removable source stop, “J” tube and collimator when it is used as an exposure head.

  • APC means the Ambulatory Payment Classification system under 42 CFR 419.31 used by Medicare for grouping clinically and resource-similar procedures and services.

  • Customer Equipment means hardware, software, systems, cabling and facilities provided by you and used in conjunction with the Equipment that we supply to you in order to receive the Services;

  • Analytical x-ray equipment means equipment used for x-ray diffraction or fluorescence analysis.

  • Redistribution Software means the software described in Paragraph 4 (“Use of Redistribution Software”) below.

  • Client Software means software that allows a Device to access or utilize the services or functionality provided by the Server Software.

  • Service Equipment means any equipment, Software, systems, cabling and facilities provided by or on behalf of Verizon and used to facilitate provision of the Services at a Customer Site. Ownership of the Service Equipment does not pass to Customer. Service Equipment does not include Verizon Facilities.

  • Oracle Software means any software agent, application or tool that Oracle makes available to You for download specifically for purposes of facilitating Your access to, operation of, and/or use with, the Services.

  • Licensed Software includes error corrections, upgrades, enhancements or new releases, and any deliverables due under a maintenance or service contract (e.g., patches, fixes, PTFs, programs, code or data conversion, or custom programming).

  • Supplier means the successful bidder who is awarded the contract to maintain and administer the required and specified service(s) to the State.