Airframe Structural Check definition

Airframe Structural Check means a heavy maintenance visit which shall include but not be limited to accomplishment of a block C6 Systems and Structural Check (equivalent to a "D" check), all lesser checks, and interior refurbishment (including lavatories and galley) consistent with average industry standards for the first C6 Systems and Structural check for the Airframe type. Where relevant, the workscope and intervals (calendar and/or hourly) shall not be less than those prescribed by the Lessee's Maintenance Program. If the Lessee's Maintenance Program is not a block program then the Lessee shall perform those tasks required to bridge the Aircraft to the block program as set forth in Appendix J of the Manufacturer's Maintenance Planning Document.
Sample 1Sample 2Sample 3
Airframe Structural Check has the meaning given in the Aircraft Lease Agreement.
Sample 1Sample 2Sample 3
Airframe Structural Check means a heavy maintenance visit which shall include (a) all 8 year inspections (whether their interval is in Flight Hours, Cycles, calendar or a combination of all three measures), including all lesser multiple inspections, ISIP/CPCP items and refurbishment of the main cargo deck including the cargo loading system; and (b) all 12 year structural inspections.
Sample 1Sample 2

Examples of Airframe Structural Check in a sentence

  • The Airframe 6C/24,000 Flight Hour Block Structural Check Supplemental Rent Rate shall be adjusted by calculating the actual Airframe utilization for the applicable 12-month period and using that to select the corresponding Airframe Structural Check Reserve Amount from the Assumed Annual Utilization Adjustment Table in Schedule 7.

  • Provided no Event of Default has occurred and is continuing, the Lessor shall reimburse the Lessee from the applicable Maintenance Reserves as set forth above following the accomplishment by the Lessee of Airframe Structural Check, Landing Gear overhaul, APU Performance Restoration, Engine Refurbishment and replacement of Engine LLPs (each “Qualifying Maintenance Event”, “QME”).

  • Provided no Event of Default has occurred and is continuing, the Lessor will reimburse the Lessee from the applicable Maintenance Reserves as set forth above following the accomplishment by the Lessee of Airframe Structural Check, Landing Gear overhaul, APU Performance Restoration, Engine Refurbishment and replacement of Engine LLPs (each “Qualifying Maintenance Event”, “QME”).


More Definitions of Airframe Structural Check

Airframe Structural Check means a heavy maintenance visit which shall include but not be limited to accomplishment of either or both of an Airframe 4C Check and an Airframe 8C Check. Airframe 4C Supplemental Rent and Airframe 4C Supplemental Rent Rate shall have the respective meanings set forth in Clause (a) of Schedule B, Part V hereof. Airframe 8C Supplemental Rent and Airframe 8C Supplemental Rent Rate shall have the respective meanings set forth in Clause (a) of Schedule B, Part V hereof.
Sample 1
Airframe Structural Check means a complete structural maintenance check described in, and completed in accordance with, the MRB Report and MPD;
Sample 1
Airframe Structural Check. ’ means the structural maintenance programme as defined in the Boeing Maintenance Planning Data Document D626A001 which is designed timely detection and repair of structural damage, corrosion, stress corrosion, fatigue cracking and other items by visual and/non-destructive test as set forth herein;
Sample 1
Airframe Structural Check means the structural maintenance programme as defined in the Boeing Maintenance Planning Data Document D626A001 which is designed timely detection and repair of structural damage, corrosion, stress corrosion, fatigue cracking and other items by visual and/non-destructive test as set forth herein; ‘‘Airworthiness Directive’’ means an airworthiness directive and/or mandatory note issued by the State of Design Authority, the Aviation Authority and the State of Registration (to the extent there is an irreconcilable conflict between them, the State of Registration requirements shall prevail and between State of Design Authority requirements and Aviation Authority requirements, Aviation Authority requirements shall prevail);
Sample 1
Airframe Structural Check means a heavy maintenance visit which shall include but not be limited to accomplishment of either or both of an Airframe 4C Check and an Airframe 8C Check.
Sample 1

Related to Airframe Structural Check

  • airframes means airframes (other than those used in military, customs or police services) that, when appropriate aircraft engines are installed thereon, are type certified by the competent aviation authority to transport:

  • Airframe means the fuselage, booms, nacelles, cowlings, fairings, airfoil surfaces including rotors (but excluding propellers and rotating airfoils of a powerplant) and landing gear of an aircraft and their accessories and controls;

  • Structural components means liners, leachate collection systems, final covers, run-on/run-off systems, and any other component used in the construction and operation of the MSWLF that is necessary for protection of human health and the environment.

  • Structural component means a component that supports non-variable forces or weights (dead loads) and variable forces or weights (live loads).

  • Unmanned aircraft system means an unmanned aircraft and associated elements (including communication links and the components that control the unmanned air- craft) that are required for the operator to operate safely and efficiently in the national airspace system.’’.

  • Aircraft means any machine that can derive support in the atmosphere from the reactions of the air other than the reactions of the air against the earth’s surface;

  • Engine under the Lease. The term "Engines" means, as of any date of determination, both Engines then leased to the Lessee pursuant to the Lease.

  • Support Structure means an existing or new structure that supports or can support a mobile service facility, including a mobile service support structure, utility pole, water tower, building, or other structure.

  • Unmanned aircraft means any aircraft operating or designed to operate autonomously or to be piloted remotely without a pilot on board;

  • Structural as herein used shall mean any portion of the Leased Premises, Building or Common Areas of the Complex which provides bearing support to any other integral member of the Leased Premises, Building or Common Areas of the Complex such as, by limitation, the roof structure (trusses, joists, beams), posts, load bearing walls, foundations, girders, floor joists, footings, and other load bearing members constructed by Landlord.

  • Overhaul means the restoration of an aircraft or aircraft component using methods, techniques, and practices acceptable to the Authority, including disassembly, cleaning, and inspection as permitted, repair as necessary, and reassembly; and testing in accordance with approved standards and technical data, or in accordance with current standards and technical data acceptable to the Authority, which have been developed and documented by the State of Design, holder of the type certificate, supplemental type certificate, or a material, part, process, or appliance approval under Parts Manufacturing Authorisation (PMA) or Technical Standard Order (TSO);

  • Structural Engineer means the Engineer appointed or to be appointed from time to time by Promoter for the preparation of the structural design and drawings of the buildings .

  • Aircraft Documents means all technical data, manuals and log books, and all inspection, modification and overhaul records and other service, repair, maintenance and technical records that are required by the FAA (or the relevant Aviation Authority), to be maintained with respect to the Aircraft, Airframe, Engines or Parts, and such term shall include all additions, renewals, revisions and replacements of any such materials from time to time made, or required to be made, by the FAA (or other Aviation Authority) regulations, and in each case in whatever form and by whatever means or medium (including, without limitation, microfiche, microfilm, paper or computer disk) such materials may be maintained or retained by or on behalf of Owner (provided, that all such materials shall be maintained in the English language).

  • Sign structure means the assembled components that make up an outdoor advertising display, including, but not limited to, uprights, supports, facings, and trim. A sign structure may contain 1 or 2 signs per facing and may be double-faced, back to back, T-type, or V-type.

  • Accessory Structure (Appurtenant Structure means a structure located on the same parcel of property as the principal structure and the use of which is incidental to the use of the principal structure. Garages, carports and storage sheds are common urban accessory structures. Pole barns, hay sheds and the like qualify as accessory structures on farms, and may or may not be located on the same parcel as the farm dwelling or shop building.

  • aircraft engines means aircraft engines (other than those used in military, customs or police services) powered by jet propulsion or turbine or piston technology and:

  • Engines means, as of any date of determination, all Engines then leased hereunder.

  • Fixed wing turbine powered aircraft means an aircraft that:

  • APU means the auxiliary power unit of the Aircraft.

  • Structural pest control means a use requiring a license under Chapter 14 (commencing with Section 8500), Division 3, of the Business and Professions Code.

  • Nonconforming structure means a structure the size, dimension or location of which was lawful prior to the adoption, revision or amendment of a zoning ordinance, but which fails to conform to the requirements of the zoning district in which it is located by reasons of such adoption, revision or amendment.

  • Erection, construction, remodeling, repairing means all types of work done on a particular building or work at the site thereof in the construction or development of the project, including without limitation, erecting, construction, remodeling, repairing, altering, painting, and decorating, the transporting of materials and supplies to or from the building or work done by the employees of the Contractor, Subcontractor, or Agent thereof, and the manufacturing or furnishing of

  • engine type means a category of engines which do not differ in essential engine characteristics.

  • Civil aircraft means any aircraft other than a public aircraft.

  • large aircraft means an aircraft, classified as an aeroplane with a maximum take-off mass of more than 5 700 kg, or a multi-engined helicopter;

  • Subsystem means any subset of the System identified as such in the Contract that may be supplied, installed, tested, and commissioned individually before Commissioning of the entire System.