Gas Meter Standards Sample Clauses

Gas Meter Standards. Orifice meters installed in such measuring stations for Gas shall be constructed and operated in accordance with ANSI/API 2530 API 14.3, AGA Report No. 3, Orifice Metering of Natural Gas and Other Related Hydrocarbon Fluids (including as it may be revised from time to time) and shall include the use of flange connections and, where necessary, straightening vanes, flow conditioners and/or pulsation dampening equipment. Ultrasonic meters or Coriolis meters installed in such measuring stations shall be constructed and operated in accordance with AGA Report No. 9, Measurement of Gas by Ultrasonic Meters, First Edition, and AGA Report No. 11, Measurement of Natural Gas by Coriolis Meter, respectively; and any subsequent modification and amendment thereof generally accepted within the Gas industry. Electronic flow computers shall be used and the Gas shall have its volume, mass, and/or heat content computed in accordance with the applicable AGA standards including, but not limited to, AGA Report Nos. 3, 5, 6, 7, 8 and API 21.1 “Flow Measurement Using Electronic Metering Systems” and any subsequent modifications and amendments thereof generally accepted within the Gas industry. When Gas chromatographs are used they shall be installed, operated, maintained, and verified according to industry standards (GPA 2261, GPA 2145, GPA 2172, and GPA 2177).
AutoNDA by SimpleDocs
Gas Meter Standards. Orifice meters installed in such measuring stations for Gas shall be constructed and operated in accordance with ANSI/API 2530 API 14.3, AGA Report No. 3, Orifice Gas Processing Agreement dated July 1, 2018 Between Alpine High Processing LP (Processor) and Apache Corporation (Producer) CONFIDENTIAL TREATMENT REQUESTED Metering of Natural Gas and Other Related Hydrocarbon Fluids (including as it may be revised from time to time) and shall include the use of flange connections and, where necessary, straightening vanes, flow conditioners and/or pulsation dampening equipment. Ultrasonic meters or Coriolis meters installed in such measuring stations shall be constructed and operated in accordance with AGA Report No. 9, Measurement of Gas by Ultrasonic Meters, First Edition, and AGA Report No. 11, Measurement of Natural Gas by Coriolis Meter, respectively; and any subsequent modification and amendment thereof generally accepted within the Gas industry. Electronic flow computers shall be used and the Gas shall have its volume, mass, and/or heat content computed in accordance with the applicable AGA standards including, but not limited to, AGA Report Nos. 3, 5, 6, 7, 8 and API 21.1 “Flow Measurement Using Electronic Metering Systems” and any subsequent modifications and amendments thereof generally accepted within the Gas industry. When Gas chromatographs are used they shall be installed, operated, maintained, and verified according to industry standards (GPA 2261, GPA 2145, GPA 2172, and GPA 2177).

Related to Gas Meter Standards

  • Standards The Employee shall perform his duties under this Agreement in accordance with such reasonable standards expected of employees with comparable positions in comparable organizations and as may be established from time to time by the Board of Directors.

  • Quality Standards Each Party agrees that the nature and quality of its products and services supplied in connection with the other Party's Marks will conform to quality standards set by the other Party. Each Party agrees to supply the other Party, upon request, with a reasonable number of samples of any Materials publicly disseminated by such Party which utilize the other Party's Marks. Each Party will comply with all applicable laws, regulations, and customs and obtain any required government approvals pertaining to use of the other Party's marks.

  • Operating Standards The Operating Standards attached to this Agreement as Exhibit "B" are hereby made an integral part of this Agreement. Lessee, its employees, agents, guests, invitees, visitors and/or any other persons caused to be present in and around the Premises by the Lessee shall perform and abide by the rules and regulations and any amendments or additions to said rules and regulations as Lessor may make. In addition, Lessee, its employees and agents shall abide by all applicable governmental rules, regulations, statutes and ordinances relating in any way to the Premises or the Facility or Lessee's use or occupancy of the Premises or the Facility; failing which Lessee shall be in default hereunder and shall pay any fines or penalties imposed for such violation(s) directly to the appropriate governmental authority or to Lessor, if Lessor has paid such amount on behalf of Lessee. Such remedy shall not be exclusive. It is hereby further explicitly agreed and understood that full compliance with the Operating Standards as set forth constitutes a material obligation of this Agreement, and that the failure to so comply shall constitute a violation of this Agreement entitling the Lessor to exercise any of its remedies pursuant to this Agreement or otherwise.

  • Service Level Standards The parties agree to negotiate in good faith certain service level standards that, once agreed upon, will be incorporated into this Agreement subsequent to the effective date of the Agreement.

  • Standards for Determining Commercial Reasonableness Borrower and Silicon agree that a sale or other disposition (collectively, "sale") of any Collateral which complies with the following standards will conclusively be deemed to be commercially reasonable: (i) Notice of the sale is given to Borrower at least seven days prior to the sale, and, in the case of a public sale, notice of the sale is published at least seven days before the sale in a newspaper of general circulation in the county where the sale is to be conducted; (ii) Notice of the sale describes the collateral in general, non-specific terms; (iii) The sale is conducted at a place designated by Silicon, with or without the Collateral being present; (iv) The sale commences at any time between 8:00 a.m. and 6:00 p.m; (v) Payment of the purchase price in cash or by cashier's check or wire transfer is required; (vi) With respect to any sale of any of the Collateral, Silicon may (but is not obligated to) direct any prospective purchaser to ascertain directly from Borrower any and all information concerning the same. Silicon shall be free to employ other methods of noticing and selling the Collateral, in its discretion, if they are commercially reasonable.

  • Building Standards Landlord has established or may establish specifications for certain Building standard components to be used in the construction of the Improvements in the Premises. The quality of Improvements shall be equal to or of greater quality than the quality of such Building standards, provided that Landlord may, at Landlord’s option, require the Improvements to comply with certain Building standards. Landlord may make changes to said specifications for Building standards from time to time. Removal requirements regarding the Improvements are addressed in Article 8 of this Lease.

  • Functional Requirements The EPDS shall perform the following functions under the Conditions and Operational Scenarios specified below:

  • Financial Accounting Practices The Borrower shall, and shall cause each of its Subsidiaries to, make and keep books, records and accounts which, in reasonable detail, accurately and fairly reflect its transactions and dispositions of its assets and maintain a system of internal accounting controls sufficient to provide reasonable assurances that (a) transactions are executed in accordance with management's general or specific authorization, (b) transactions are recorded as necessary (i) to permit preparation of financial statements in conformity with GAAP and (ii) to maintain accountability for assets, (c) access to assets is permitted only in accordance with management's general or specific authorization and (d) the recorded accountability for assets is compared with the existing assets at reasonable intervals and appropriate action is taken with respect to any differences.

  • Work Standards The Contractor shall execute its responsibilities by following and applying at all times the highest professional and technical guidelines and standards. If the State becomes dissatisfied with the work product of or the working relationship with those individuals assigned to work on this Contract, the State may request in writing the replacement of any or all such individuals, and Contractor shall grant such request.

  • BUILDING RULES AND REGULATIONS The following rules and regulations shall apply, where applicable, to the Premises, the Building, the parking facilities (if any), the Property and the appurtenances. In the event of a conflict between the following rules and regulations and the remainder of the terms of the Lease, the remainder of the terms of the Lease shall control. Capitalized terms have the same meaning as defined in the Lease.

Time is Money Join Law Insider Premium to draft better contracts faster.