Clinical Supply Takeda will provide to Licensee[***] the amount of TAK-385 Licensed Compound or TAK-385 Licensed Products needed by Licensee to complete all Clinical Trials contemplated by the TAK-385 Development Plan (estimated by Licensee as of the Effective Date to be [***]), solely to the extent that Takeda can supply such TAK-385 [***] = Portions of this exhibit have been omitted and filed separately with the Securities and Exchange Commission. Confidential treatment requested under 17 C.F.R. Sections 200.80(b)(4) and 230.406. Licensed Compound or TAK-385 Licensed Products (a) from its supply of TAK-385 Licensed Compound or TAK-385 Licensed Products in existence as of the Effective Date and which supply can be used for its intended purposes without further re-processing (the “Initial Clinical Supply”) and (b) after retaining the amount needed by Takeda for Clinical Trials in the Takeda Territory. Takeda will also provide to Licensee, at [***] any additional supplies of TAK-385 Licensed Compound or TAK-385 Licensed Products in excess of the Initial Clinical Supply needed by Licensee to complete all Clinical Trials contemplated by the TAK-385 Development Plan. Within [***] days after the Effective Date, the Parties will enter into a manufacturing and supply agreement (the “Takeda Clinical Manufacturing and Supply Agreement”), which will govern the terms and conditions of the Manufacturing and supply of the TAK-385 Licensed Compound and TAK-385 Licensed Products (including the Initial Clinical Supply) by Takeda to Licensee for Development purposes, including the exact quantities and the timelines for delivery. The Parties will negotiate the terms and conditions of such Takeda Clinical Manufacturing and Supply Agreement in good faith for a period of [***] days (as may be extended upon agreement of the Parties). As part of the negotiation related to the Takeda Clinical Manufacturing and Supply Agreement, the Parties shall discuss in good faith the ability of Takeda to supply to Licensee [***]. If the Parties have not entered into a definitive agreement within such negotiation period, then the final terms and conditions of such agreement will be resolved in accordance with Section 8.2 (Arbitration for Failure to Agree).
Development Costs With respect to activities prior to the Amendment Effective Date, each Party was to pay [*] of the total Direct Development Costs of a Product incurred in accordance with the Development Budget (as defined in the Original Agreement). Notwithstanding anything in this Article 6 of this Agreement or in any other provision of this Agreement to the contrary, with respect to activities on and after the Amendment Effective Date, subject to Sections 3.1.2, Alimera will be solely responsible for, and shall pay one hundred percent (100%) of, all development costs of a Product, including Direct Development Costs. Notwithstanding anything in this Article 6 of this Agreement or in any other provision of this Agreement to the contrary, (i) all payments owing by CDS hereunder with respect to development activities prior to the Amendment Effective Date are hereby deemed fully paid by CDS (or waived, to the extent such waiver may be required), including any Development Payments, Compounded Development Payments, Determined Disputed Costs and Compounded Disputed Costs (as all defined in the Original Agreement), further including any penalties and interest which might have accrued with respect thereto, and further including all CDS payments deferred pursuant to that February 11, 2008 letter agreement sent by CDS and executed by CDS and Alimera regarding deferral of payments under the Original Agreement as of such date; (ii) all payments owing by Alimera hereunder with respect to development activities prior to the Amendment Effective Date are hereby deemed fully paid by Alimera (or waived, to the extent such waiver may be required), including any Development Payments, Compounded Development Payments, Determined Disputed Costs and Compounded Disputed Costs (as all defined in the Original Agreement), and further including any penalties and interest which might have accrued with respect thereto; and (iii) subject to Sections 3.1.1 and 3.1.2, from and after the Amendment Effective Date, CDS will have no liability whatsoever hereunder for any past, present or future development costs, including Direct Development Costs (which includes those incurred before, on and after the Amendment Effective Date), and instead Alimera shall have sole liability therefor.
Manufacturing Services Jabil will manufacture the Product in accordance with the Specifications and any applicable Build Schedules. Jabil will reply to each proposed Build Schedule that is submitted in accordance with the terms of this Agreement by notifying Company of its acceptance or rejection within three (3) business days of receipt of any proposed Build Schedule. In the event of Jabil’s rejection of a proposed Build Schedule, Jabil’s notice of rejection will specify the basis for such rejection. When requested by Company, and subject to appropriate fee and cost adjustments, Jabil will provide Additional Services for existing or future Product manufactured by Jabil. Company shall be solely responsible for the sufficiency and adequacy of the Specifications [***].
Development Activities The Development activities referred to in item “b” of paragraph 3.1 include: studies and projects of implementation of the Production facilities; drilling and completion of the Producing and injection xxxxx; and installation of equipment and vessels for extraction, collection, Treatment, storage, and transfer of Oil and Gas. The installation referred to in item “c” includes, but is not limited to, offshore platforms, pipelines, Oil and Gas Treatment plants, equipment and facilities for measurement of the inspected Production, wellhead equipment, production pipes, flow lines, tanks, and other facilities exclusively intended for extraction, as well as oil and gas pipelines for Production Outflow and their respective compressor and pumping stations.
Clinical Studies The animal and other preclinical studies and clinical trials conducted by the Company or on behalf of the Company were, and, if still pending are, to the Company’s knowledge, being conducted in all material respects in compliance with all Applicable Laws and in accordance with experimental protocols, procedures and controls generally used by qualified experts in the preclinical study and clinical trials of new drugs and biologics as applied to comparable products to those being developed by the Company; the descriptions of the results of such preclinical studies and clinical trials contained in the Registration Statement and the Prospectus are accurate and complete in all material respects, and, except as set forth in the Registration Statement and the Prospectus, the Company has no knowledge of any other clinical trials or preclinical studies, the results of which reasonably call into question the clinical trial or preclinical study results described or referred to in the Registration Statement and the Prospectus when viewed in the context in which such results are described; and the Company has not received any written notices or correspondence from the FDA, the EMA, or any other domestic or foreign governmental agency requiring the termination, suspension or modification of any preclinical studies or clinical trials conducted by or on behalf of the Company that are described in the Registration Statement and the Prospectus or the results of which are referred to in the Registration Statement and the Prospectus.
Commercial Supply Celgene shall Manufacture and supply all Commercial Supplies.
Program Costs 3.1 The Province will pay the University of British Columbia’s Faculty of Medicine for the costs of the Participant’s Postgraduate Medical Education. Annually, the cost to the Province to fund the Participant’s Postgraduate Medical Education is approximately $150,000, including the Participant’s salary and benefits.
Development Milestone Payments In partial consideration for the rights and licenses granted to Coya hereunder, within ten days after the first achievement of each milestone event in a given Indication set forth in this Section 5.2 (Development Milestone Payments) with respect to a Product (each, a “Development Milestone Event”) by or on behalf of Coya or any of its Affiliates or Sublicensees, Coya shall provide ARScience Bio written notice to ARScience Bio identifying the Development Milestone Event achieved. Upon receipt of any such notice of first achievement of a Development Milestone Event by Coya or its Affiliates or Sublicensees, ARScience Bio will promptly invoice Coya for the applicable Development Milestone Event and Coya will make a milestone payment to ARScience Bio in the amount set forth in this Section 5.2 (Development Milestone Payments) corresponding to such Development Milestone Event (each, a “Development Milestone Payment”) within 45 days of receipt of such invoice. On an Indication-by-Indication basis, each Development Milestone Payment shall be payable only upon the first achievement of the corresponding Development Milestone Event by a Product, in any given Indication for which the Development Milestone Events have not been previously achieved (each such Indication, a “New Indication”). No amounts shall be due for subsequent or repeated achievements of such Development Milestone Event with respect to the same or different Mono Product or Combination Product, as applicable, in such Indication. Accordingly and for clarity, the Development Milestone Payment shall be paid only once, when first achieved by Coya, an Affiliate or a Sublicensee, but no payment shall be due if the same milestone is subsequently achieved by one of Coya, an Affiliate or a Sublicensee. For clarity, the amounts owed in Column (a) below shall be due for the first Combination Product to achieve the Development Milestone Events in a New Indication and the amounts owned in Column (c) below shall be due for the first Mono Product to achieve the Development Milestone Events in a New Indication. Any Combination Product or Mono Product to achieve the Development Milestone Events in a New Indication after the first achievement of the Development Milestone Events as described in the foregoing sentence will cause the amounts in Column (b) with respect to a Combination Product and Column (d) with respect to a Mono Product to be due and payable by Coya upon each such occurrence. If the first Product to achieve a Development Milestone Event in any Indication is a Combination Product, the amounts in Column (a) below shall be due and payable by Coya. If the next Product to achieve a Development Milestone Event in a New Indication is a Mono Product, the amounts in Column (c) below would be due and payable by Coya; provided, that if such next Product to achieve a Development Milestone Event in a New Indication is a Combination Product, the amounts in Column (b) would be due and payable by Coya. By way of example, if a Combination Product achieves IND Acceptance in ALS, and is the first Product to achieve a Development Milestone Event under this Agreement, [***] will be due and payable by Coya. If subsequently a Mono Product achieves IND Acceptance in ALS, no Development Milestone Payments will be due and payable by Coya under this Agreement. However, if subsequently any Combination Product achieves IND Acceptance in Alzheimer’s disease, [***] would be due and payable by Coya.
Commercialization Intrexon shall have the right to develop and Commercialize the Reverted Products itself or with one or more Third Parties, and shall have the right, without obligation to Fibrocell, to take any such actions in connection with such activities as Intrexon (or its designee), at its discretion, deems appropriate.
Manufacture of Products All Products marketed through Grantor's Web ------------------------- Site shall be manufactured, packaged, prepared, and shipped in accordance with the specifications and requirements described on Exhibit A hereto as it may be modified from time to time. Quality control standards relating to the Product's weight, color, consistency, micro-biological content, labeling and packaging are also set forth on Exhibit A. In the event that Exhibit A is incomplete, Products shall be manufactured and shipped in accordance with industry standards.
