Cars accepted LM P3 Sample Clauses

Cars accepted LM P3. Prototype cars referred to below as LM P3, as defined in the applicable Technical Regulations and approved by the FIA and/or ACO in accordance with Technical Regulations 2018. They are automatically eligible as long as they comply with the latest LMP3 Technical Regulations in force. LMP3 cars Balance of performance Ultimate cup series will comply with the decisions of the ELMS committee regarding the LMP3 balance of performance. The minimum weight is 930 kg According to the available places: P4 - Ultimate Cup series could accept this new generation of prototype: o Ligier JSP4 o Pescarolo 04 open or closed version o Etc... This category must have lower performance than LMP3. Classes could be created according to the participants. DRIVING TIME Composition Platinum/gold Silver Bronze 2 drivers bronze + silver mini 1h45 bronze + bronze mini 50min/driver silver + silver mini 1h45/driver gold + bronze mini 1h45 3 drivers gold + silver + bronze max 1h mini 1h45 silver + silver + bronze mini 1h45 silver + silver +silver mini 1h00/driver gold + bronze + bronze max 1h mini 50min/driver silver + bronze + bronze mini 50min/driver bronze + bronze + bronze mini 50min/driver QUALIFICATION ORDER Composition Q1 Q2 Q3 2 drivers bronze + silver bronze bronze silver bronze + bronze bronze 1 to choose bronze 2 silver + silver silver 1 to choose silver 1 gold + bronze bronze bronze gold 3 drivers gold + silver + bronze bronze silver gold silver + silver + bronze bronze silver 1 silver 2 silver + silver + silver silver 1 silver 2 silver 3 gold + bronze + bronze bronze 1 bronze 2 gold silver + bronze + bronze bronze 1 bronze 2 silver bronze + bronze + bronze bronze 1 bronze 2 bronze 3 BALANCE PENALTIES Composition Penaltie to be respected to each of the 3 mandatory pit-stops 2 drivers bronze + silver 39s bronze + bronze 0s silver + silver 74s gold + bronze 62s 3 drivers gold + silver + bronze 50s silver + silver + bronze 39s silver + silver + silver 74s gold + bronze + bronze 31s silver + bronze + bronze 41s bronze + bronze + bronze 0s APPENDIX 5 APPENDIX 6 Specific regulation The specific rules for each event of the Challenge PROTO Ultimate Cup Series will meet the requirements of Article 11, will be detailed according to the diagram below and published before each meeting.
AutoNDA by SimpleDocs
Cars accepted LM P3. Prototype cars referred to below as LM P3, as defined in the applicable Technical Regulations and approved by the FIA and/or ACO in accordance with Technical Regulations 2018. "See Appendix 2" They are automatically eligible as long as they comply with the latest LMP3 2018 Technical Regulations in force. LMP3 cars Balance of performance The main objectives for these cars must be reliability, safety and low maintenance costs. Then, Ultimate Cup series will be able to take immediate action to adjust the performance. Ultimate cup series will comply with the decisions of the ELMS committee regarding the LMP3 balance of performance. The minimum weight is 930 kg According to the available places: P4 - Ultimate Cup series could accept this new generation of prototype: o Ligier JSP4 o Pescarolo 04 open or closed version o Etc... S1 - Ultimate Cup series could accept new generation silhouette vehicles o Foenix o Renault RS01 o Etc... Both This categories category must have lower performance than LMP3. Classes could be created according to the participants. APPENDIX 4 DRIVING TIME AND HANDICAP

Related to Cars accepted LM P3

  • BID ACCEPTANCE PERIOD A bid shall constitute an irrevocable offer for a period of ninety (90) days from the bid opening date or until the date of award. In the event that an award is not made by the County within ninety (90) days from the bid opening date, the Bidder may withdraw their bid or provide a written extension of their bid.

  • Limited Acceptance If appropriately indicated herein, Merchant shall be a Limited Acceptance Merchant, which means that Merchant has elected to accept only certain Visa and MasterCard card types as indicated on the Merchant Application, or via later notification. The Visa or MasterCard Credit acceptance option on the Merchant Application refers to Visa Credit and Business transactions, and is what MasterCard refers to as “Other Card” transactions. Notwithstanding anything to the contrary in the Application, Merchant can elect (i) to accept only Visa or MasterCard non-PIN based debit/stored value/electronic benefit transactions (sometimes referred to as “signature debit” transactions, whether or not an actual signature is required), or (ii) to accept only Visa or MasterCard Credit transactions, or (iii) to accept all Visa or MasterCard Credit and signature debit transactions; provided, however, that a Merchant who accepts any Visa or MasterCard Card types must accept all valid Visa or MasterCard Card types issued by a non-U.S. issuer. Merchant is not required to accept Card brands other than Visa or MasterCard in order to accept Visa or MasterCard Cards (except that transactions using Diner’s International Cards which also carry the MasterCard Xxxx must be accepted if Merchant accepts MasterCard Card transactions of the same type). Bank has no obligation other than those expressly provided under the Operating Rules and applicable law as they may relate to Limited Acceptance. Bank’s obligations do not include policing card types at the point of sale. Merchant will be solely responsible for the implementation of its decision for limited acceptance including but not limited to policing the card type(s) of transactions at the point of sale submitted for processing by Bank. Should Merchant submit a transaction for processing for a card type it has indicated it does not wish to accept, Bank may process that transaction and Merchant will pay the applicable fees, charges, and assessments associated with that transaction. Merchant will comply with any applicable laws and Operating Rules for the card type processed.

  • National Competitive Bidding Goods estimated to cost less than $250,000 equivalent per contract and works estimated to cost less than $500,000 equivalent per contract, may be procured under contracts awarded on the basis of National Competitive Bidding.

  • Your Acceptance 1.1 This is an agreement between SmarTone Mobile Communications Limited ("SmarTone" or "the Company") and you ("you" or the “Customer”), a user of KKBOX ("the Service"). BY

  • Order Acceptance All orders are subject to acceptance only at Seller’s facility in Farmington, Connecticut. These Terms of Sale shall be deemed accepted by Buyer upon Seller’s receipt of Purchase Order from Buyer. No condition stated by Buyer shall be binding upon Seller if in conflict with, inconsistent with or in addition to the Terms of Sale, unless expressly accepted in a writing signed by Seller. In the event of conflict or differences in the terms or conditions of Buyer’s Purchase Order and the Terms of Sale herein, the Terms of Sale shall govern.

  • Agreement Acceptance This Agreement is subject to acceptance by signature, issuance of an appropriate purchase order, and approval of the Agreement by the Board of Education.

  • International Competitive Bidding Except as otherwise provided in paragraph 2 below, goods and works shall be procured under contracts awarded on the basis of International Competitive Bidding.

  • CONTRACT ACCEPTANCE By acceptance of this order, Xxxxxx agrees that the scope of the work required is understood by Xxxxxx; that there are no informal commitments by Buyer that in any way affect the work under this order; that there are no open or unresolved issues related to this order except as explicitly stated herein; and that Xxxxxx therefore understands and agrees that this order states the complete agreement of the parties. COST ACCOUNTING STANDARDS (CAS) CAS requirements do not apply if the order does not exceed $650,000 or if the Seller claims an exemption per the Proposal Representation and Certification, or if certified cost or pricing data was not provided.

  • Inspection; Acceptance The Contractor (immixTechnology, Inc.) can only, and shall only tender for acceptance those items that substantially conform to the software manufacturer’s (“Dassault Systemes Americas Corp.”) published specifications. Therefore, items delivered shall be considered accepted upon delivery. The Government reserves the right to inspect or test any supplies or services that have been delivered. The Government may require repair or replacement of nonconforming supplies or re-performance of nonconforming services at no increase in contract price. If repair/replacement or re-performance will not correct the defects or is not possible, the Government may seek an equitable price reduction or adequate consideration for acceptance of nonconforming supplies or services. The Government must exercise its post-acceptance rights-

  • PRODUCT ACCEPTANCE Unless otherwise provided by mutual agreement of the Authorized User and the Contractor in the Authorized User Agreement, Authorized User(s) shall have sixty (60) days from the date of delivery to accept all Product. Where the Contractor is responsible for installation, acceptance shall be from completion of installation. Title or other property interest and risk of loss shall not pass from Contractor to the Authorized User until the Products have been accepted. Failure to provide notice of acceptance or rejection or a deficiency statement to the Contractor by the end of the period provided for under this clause constitutes acceptance by the Authorized User(s) as of the expiration of that period. The License Term shall be extended by the time periods allowed for trial use, testing and acceptance unless the Commissioner or Authorized User agrees to accept the Product at completion of trial use. Unless otherwise provided by mutual agreement of the Authorized User and the Contractor, Authorized User shall have the option to run testing on the Product prior to acceptance, such tests and data sets to be specified by User. Where using its own data or tests, Authorized User must have the tests or representative set of data available upon delivery. This demonstration will take the form of a documented installation test, capable of observation by the Authorized User, and shall be made part of the Contractor’s standard documentation. The test data shall remain accessible to the Authorized User after completion of the test. In the event that the documented installation test cannot be completed successfully within the specified acceptance period, and the Contractor or Product is responsible for the delay, Authorized User shall have the option to cancel the order in whole or in part, or to extend the testing period for an additional thirty

Time is Money Join Law Insider Premium to draft better contracts faster.