PRODUCTS PROVIDED. Insofar as BPW provides products for production by XY, these are to be inspected by XY following delivery for freedom from defects, unless otherwise agreed with BPW. Should this inspection reveal a defect, XY will immediately indicate this to BPW.
PRODUCTS PROVIDED. H Power shall provide the following products and services by the dates specified in Schedule A (as well as other products specified there):
PRODUCTS PROVIDED. 1. Production means provided shall be returned to Lindauer DORNIER GmbH in a state where wear through usage does not exceed the normal measure to be expected.
PRODUCTS PROVIDED. The products to be covered by these Terms (each a “Product” or collectively the “Products”) are set forth in one or more quotes, proposals or purchase orders between Service Provider and Client. In the event Client chooses to order additional products from Service Provider utilizing Service Provider’s website, these Terms, as contained on such website as of the date of such order, shall apply to any such products ordered. These Terms are subject to any additional Hardware Services Agreement, Consulting Agreement, or other agreement(s) (the “Ancillary Agreements”) between Service Provider and Client.


  • Products and Services General Information The Vendor Agreement (“Agreement”) made and entered into by and between The Interlocal Purchasing System (hereinafter “TIPS”) a government cooperative purchasing program authorized by the Region 8 Education Service Center, having its principal place of business at 4845 US Hwy 271 North, Pittsburg, Texas 75686 and the TIPS Vendor. This Agreement consists of the provisions set forth below, including provisions of all attachments referenced herein. In the event of a conflict between the provisions set forth below and those contained in any attachment, the provisions set forth shall control unless otherwise agreed by the parties in writing and by signature and date on the attachment. A Purchase Order (“PO”), Agreement or Contract is the TIPS Member’s approval providing the authority to proceed with the negotiated delivery order under the Agreement. Special terms and conditions as agreed between the Vendor and TIPS Member should be added as addendums to the Purchase Order, Agreement or Contract. Items such as certificate of insurance, bonding requirements, small or disadvantaged business goals are some, but not all, of the possible addendums.

  • Additional Products and Services Subject to the allocation of funds, the CPO may add similar equipment, supplies, services, or locations, within the scope of this Agreement, to the list of equipment, supplies, services, or locations to be performed or provided by giving written notification to Contractor. For purposes of this Section, the “Effective Date” means the date specified in the notification from the CPO. As of the Effective Date, each item added is subject to this Agreement, as if it had originally been a part, but the charge for each item starts to accrue only on the Effective Date. In the event the additional equipment, supplies, services, or locations are not identical to the items(s) already under this Agreement, the charges therefor will then be Contractor’s normal and customary charges or rates for the equipment, supplies, services, or locations classified in the Fees and Costs (Exhibit “F”).

  • Products Products available under this Contract are limited to Software, including Software as a Service, products and related products as specified in Appendix C, Pricing Index. Vendor may incorporate changes to their product offering; however, any changes must be within the scope of products awarded based on the posting described in Section 1.B above. Vendor may not add a manufacturer’s product line which was not included in the Vendor’s response to the solicitation described in Section 1.B above.

  • Product ACCEPTANCE Unless otherwise provided by mutual agreement of the Authorized User and the Contractor, Authorized User(s) shall have thirty (30) days from the date of delivery to accept hardware products and sixty (60) days from the date of delivery to accept all other Product. Where the Contractor is responsible for installation, acceptance shall be from completion of installation. Failure to provide notice of acceptance or rejection or a deficiency statement to the Contractor by the end of the period provided for under this clause constitutes acceptance by the Authorized User(s) as of the expiration of that period. The License Term shall be extended by the time periods allowed for trial use, testing and acceptance unless the Commissioner or Authorized User agrees to accept the Product at completion of trial use. Unless otherwise provided by mutual agreement of the Authorized User and the Contractor, Authorized User shall have the option to run testing on the Product prior to acceptance, such tests and data sets to be specified by User. Where using its own data or tests, Authorized User must have the tests or representative set of data available upon delivery. This demonstration will take the form of a documented installation test, capable of observation by the Authorized User, and shall be made part of the Contractor’s standard documentation. The test data shall remain accessible to the Authorized User after completion of the test. In the event that the documented installation test cannot be completed successfully within the specified acceptance period, and the Contractor or Product is responsible for the delay, Authorized User shall have the option to cancel the order in whole or in part, or to extend the testing period for an additional thirty (30) day increment. Authorized User shall notify Contractor of acceptance upon successful completion of the documented installation test. Such cancellation shall not give rise to any cause of action against the Authorized User for damages, loss of profits, expenses, or other remuneration of any kind. If the Authorized User elects to provide a deficiency statement specifying how the Product fails to meet the specifications within the testing period, Contractor shall have thirty (30) days to correct the deficiency, and the Authorized User shall have an additional sixty (60) days to evaluate the Product as provided herein. If the Product does not meet the specifications at the end of the extended testing period, Authorized User, upon prior written notice to Contractor, may then reject the Product and return all defective Product to Contractor, and Contractor shall refund any monies paid by the Authorized User to Contractor therefor. Costs and liabilities associated with a failure of the Product to perform in accordance with the functionality tests or product specifications during the acceptance period shall be borne fully by Contractor to the extent that said costs or liabilities shall not have been caused by negligent or willful acts or omissions of the Authorized User’s agents or employees. Said costs shall be limited to the amounts set forth in the Limitation of Liability Clause for any liability for costs incurred at the direction or recommendation of Contractor.

  • Product Information (a) The Parties recognize that by reason of, among other things, the requirement that Sanofi exercises the Option to Continue prior to the license grant under Section 2.2 becoming effective, and Ardelyx’s grant of the exclusive Option to Continue to Sanofi, both Parties have an interest in the retention in confidence of certain information relating to the Program Compounds and Program Products. Accordingly, except as set forth in this Section 7.1(a), Section 7.3 or Section 7.5 or expressly authorized elsewhere in this Agreement, until such time as Sanofi exercises the Option to Continue and pays the Continuation Milestone in accordance with the terms hereof, Ardelyx and Sanofi shall, and shall each cause its respective Affiliates and their respective officers, directors, employees and agents to, keep confidential, and not publish or otherwise disclose, and not use directly or indirectly for any purpose other than to perform its obligations under this Agreement, (i) any information that is Controlled by Ardelyx relating to the Ardelyx Compounds or Licensed Patents or constituting Licensed Know-How or Joint Technology, or (ii) any information that is Controlled by Sanofi constituting Sole Program Know-How owned by Sanofi or Joint Technology, or relating to Sanofi Sole Invention Patents or Program Compounds (collectively, (i) and (ii) “Product Information”) except in each case, to the extent the Product Information is in the public domain prior to the Effective Date, or through no fault of either Party, its Affiliates or any of their respective officers, directors, employees or agents enters the public domain after the Effective Date. For clarification, the disclosure or transfer by Ardelyx to Sanofi or by Sanofi to Ardelyx of any Product Information shall not cause such information to cease to be subject to the provisions of this Section 7.1. Notwithstanding anything herein, Sanofi shall not be restricted from using its own Product Information for any purpose, to the extent that such use would not constitute an infringement of the Program Patents.

  • Customer Materials Subject to Section 4(a), all right, title and interest (including all Intellectual Property Rights) in and to the Customer Materials are owned by Customer or Customer’s suppliers.

  • Defective Products Dead on Arrival (DOA). Tech Data shall have the right to --------------------------------------- return to NetIQ for Return Credit any DOA Product that is returned to Tech Data within ninety (90) days after the initial delivery date to the End User and any Product that fails to perform in accordance with NetIQ's Product warranty. NetIQ shall bear all costs of shipping and risk of loss of DOA and in-warranty Products to NetIQ's location and back to Tech Data or Tech Data's Customer.

  • Third Party Materials The Application may display, include, or make available third-party content (including data, information, applications, and other products, services, and/or materials) or provide links to third-party websites or services, including through third- party advertising ("Third-Party Materials"). You acknowledge and agree that Company is not responsible for Third-Party Materials, including their accuracy, completeness, timeliness, validity, copyright compliance, legality, decency, quality, or any other aspect thereof. Company does not assume and will not have any liability or responsibility to you or any other person or entity for any Third-Party Materials. Third-Party Materials and links thereto are provided solely as a convenience to you, and you access and use them entirely at your own risk and subject to such third parties' terms and conditions.

  • THIRD PARTY WEBSITES AND CONTENT The Website contains (or you may be sent through the Website or the Company Services) links to other websites ("Third Party Websites") as well as articles, photographs, text, graphics, pictures, designs, music, sound, video, information, applications, software and other content or items belonging to or originating from third parties (the "Third Party Content"). Such Third Party Websites and Third Party Content are not investigated, monitored or checked for accuracy, appropriateness, or completeness by us, and we are not responsible for any Third Party Websites accessed through the Website or any Third Party Content posted on, available through or installed from the Website, including the content, accuracy, offensiveness, opinions, reliability, privacy practices or other policies of or contained in the Third Party Websites or the Third Party Content. Inclusion of, linking to or permitting the use or installation of any Third Party Website or any Third Party Content does not imply approval or endorsement thereof by us. If you decide to leave the Website and access the Third Party Websites or to use or install any Third Party Content, you do so at your own risk and you should be aware that our terms and policies no longer govern. You should review the applicable terms and policies, including privacy and data gathering practices, of any website to which you navigate from the Website or relating to any applications you use or install from the Website. Any purchases you make through Third Party Websites will be through other websites and from other companies, and Company takes no responsibility whatsoever in relation to such purchases which are exclusively between you and the applicable third party. SITE MANAGEMENT Company reserves the right but does not have the obligation to:

  • New Products You agree to comply with NASD Notice to Members 5-26 recommending best practices for reviewing new products.