CONSTRUCTION DOCUMENTS Based Sample Clauses

The "Construction Documents Based" clause defines the requirement that the project will be executed according to a specific set of construction documents, such as drawings, specifications, and related materials. This clause typically mandates that all work performed must strictly adhere to these documents, and any deviations or changes must be formally approved. For example, contractors may be required to reference these documents for all construction details and submit requests for information if clarification is needed. The core function of this clause is to ensure consistency, accuracy, and clear communication throughout the construction process, reducing the risk of misunderstandings or unauthorized changes.
CONSTRUCTION DOCUMENTS Based on the approved Design Development Documents and updated estimate of the Cost of Construction and Project Schedule, the Design Professional shall prepare, for the Owner's review and approval and the approval of governmental authorities, including any revisions necessary to secure such approvals, Construction Documents setting forth in detail the quality levels of and the requirements for construction of the Project, and consisting of Drawings and Specifications that comply with Laws. When the Design Professional submits the Construction Documents, the Design Professional shall identify in writing for the Owner's approval all material changes and deviations that have taken place from the Design Development Documents and the previously approved estimate of the Cost of Construction and Project Schedule. The Construction Documents shall describe all Work necessary to bid and construct the Project. The Design Professional shall submit the designated quantity of the Construction Documents and copies of the tabulation of areas as identified in Article 11. 3.2.5.1 The Design Professional shall consult with the Owner's Representative to identify bidding strategies including alternates required to protect the integrity of the budgeted Cost of Construction. 3.2.5.2 The Construction Documents shall comply with all applicable Laws and regulations pertinent to the Project. The Design Professional shall obtain and forward to the Owner letters of approval from all applicable agencies prior to receipt of bids. 3.2.5.3 The Design Professional of record and appropriate Consultants shall place their individual information blocks with certifications, seals, signatures and dates on the original title page of the Construction Documents. The information block shall include the numbers of the pages or sheets, which are covered by certification. The Design Professional shall deliver one set of Construction Documents (Drawings and Specifications) to the Owner with certifications required prior to the bid date of the Project.
CONSTRUCTION DOCUMENTS Based on the approved Design Development Documents and updated estimate of the Cost of Work and Project Schedule, Design Professional shall prepare, for Owner’s review and approval and the approval of governmental authorities, Construction Documents, including any revisions necessary to secure such approvals, setting forth in detail the quality levels of and the requirements for construction of the Project, and consisting of drawings and specifications that comply with Laws. 3.2.11.1 When Design Professional submits the Construction Documents, Design Professional shall identify in writing for Owner’s approval any proposed alternates. Preparation of alternates to keep within the approved fixed limits of the Cost of the Work and approved by the Owner shall be included in Design Professional's basic services and shall not be compensated as a Change in Service. 3.2.11.2 Design Professional shall identify all material changes and deviations that have taken place from the Design Development Documents and the previously approved estimate of the Cost of Work and Project Schedule. 3.2.11.3 The Construction Documents shall describe all work necessary to bid and construct the Project; all room numbers shown on the Construction Documents shall be established in collaboration with Owner and reflect Owner’s standard guidelines therefor. 3.2.11.4 Design Professional shall provide Construction Documents in electronic form and also provide two full-sized printed sets to Owner.

Related to CONSTRUCTION DOCUMENTS Based

  • Construction Documents The architectural and engineering documents setting forth the design for the Project prepared by the Design Professional. Construction Documents include, but are not limited to, the Specifications, the Drawings, the Supplementary Conditions, the General Conditions, and all Addenda.

  • Construction Documents Phase Bidding or Negotiation Phase:

  • Construction Document Phase 1.4.1 Based on the approved Design Development Documents, Guaranteed Maximum Price, coordinated models and any further adjustments in the scope or quality of the Project or in the Amount Available for the Construction Contract authorized by the Owner, the Architect/Engineer shall prepare, for approval by the Owner and review by the Construction Manager, Construction Documents consisting of Drawings, Schedules and Specifications derived from the model(s) in accordance with Owner’s written requirements setting forth in detail the requirements for construction of the Project, including, without limitation, the BIM Execution Plan and “Facility Design Guidelines”. The Plans, Drawings and Specifications for the entire Project shall be so prepared that same will call for the construction of the building and related facilities, together with its built-in permanent fixtures and equipment which will cost not more than the Guaranteed Maximum Price accepted by Owner, or the Amount Available for the Construction Contract established by Owner if no Guaranteed Maximum Price proposal has been accepted by Owner. The Architect/Engineer will be responsible for managing the design to stay within such Guaranteed Maximum Price proposal or Amount Available for the Construction Contract. The Architect/Engineer shall review the Construction Documents as they are being prepared at intervals appropriate to the progress of the Project with the Owner and Construction Manager at the Project site or other location specified by Owner in the State of Texas. The Architect/Engineer shall utilize the model(s) to support the review process during Construction Documents. The Architect/Engineer shall allow the Construction Manager to utilize the information uploaded into Owner’s PMIS to assist the Construction Manager in fulfilling its responsibilities to the Owner. 1.4.2 As a part of Construction Documents Phase, Architect/Engineer shall accomplish model coordination, aggregation and “clash detection” to remove conflicts in design between systems, structures and components. Model coordination shall occur at all reviews during the Construction Documents Phase as identified in the BIM Execution Plan. Architect/Engineer shall utilize Owner’s PMIS to accomplish model coordination and collaborate with Construction Manager in the resolution of critical clashes identified by the Construction Manager. Architect/Engineer shall demonstrate and provide written assurance to Owner that conflicts/collisions between models have been resolved. 1.4.3 The Architect/Engineer shall consult with the Owner and Construction Manager on matters such as construction phasing and scheduling, bid or proposal alternates, liquidated damages, the construction contract time period, and other construction issues appropriate for the Project. The Architect/Engineer shall assist the Owner and Construction Manager in the preparation of the necessary bidding information, bidding forms, RFP information, and RFP forms, and the Conditions of the Contract. 1.4.4 The Architect/Engineer shall assist the Owner in connection with the Owner’s responsibility and procedures for obtaining approval of all building and accessibility authorities having jurisdiction over the Project. 1.4.5 The Architect/Engineer shall provide coordination and inclusion of sequence of operations for all operable systems in the facility as defined by Owner during Design Development. 1.4.6 The Architect/Engineer shall review the Estimated Construction Cost prepared by the Construction Manager, and shall provide written comments. 1.4.7 The Architect/Engineer shall participate in a final review of the Construction Documents and model(s) with the Owner and Construction Manager at the Project location or other location specified by Owner in the State of Texas. Prior to the Owner’s approval of the Construction Documents, the Architect/Engineer shall incorporate such changes as are necessary to satisfy the Owner’s review comments. 1.4.8 The Architect/Engineer shall provide a list of all manufacturer warranties and submittals that are required by their specification. 1.4.9 Before proceeding into the Bidding and Proposal Phase, the Architect/Engineer shall obtain Owner’s written acceptance of the Construction Documents and approval of the Final Amount Available for the Construction Contract as approved by the Board of Regents.

  • Construction Documents Phase Services 3.4.1 Based on the Owner’s approval of the Design Development Documents, and on the Owner’s authorization of any adjustments in the Project requirements and the budget for the Cost of the Work, the Architect shall prepare Construction Documents for the Owner’s approval. The Construction Documents shall illustrate and describe the further development of the approved Design Development Documents and shall consist of Drawings and Specifications setting forth in detail the quality levels and performance criteria of materials and systems and other requirements for the construction of the Work. The Owner and Architect acknowledge that, in order to perform the Work, the Contractor will provide additional information, including Shop Drawings, Product Data, Samples and other similar submittals, which the Architect shall review in accordance with Section 3.6.4.

  • Acquisition Documents (a) Borrowers and Guarantors have delivered, or caused to be delivered, to Agent, true, correct and complete copies of the Acquisition Documents. (b) The Acquisition Documents set forth the entire agreement and understanding of the parties thereto relating to the subject matter thereof, and there are no other agreements, arrangements or understandings, written or oral, relating to the matters covered thereby. (c) None of the Acquisition Documents have been amended or otherwise modified without the prior written consent of Agent. (d) The execution, delivery and performance of the Acquisition Documents have been duly authorized by all necessary action on the part of Parent and each of its Subsidiaries that is a party thereto and to the best of the knowledge of Borrowers and Guarantors, each other party thereto. Each of the Acquisition Documents is the legal, valid and binding obligation of the parties thereto, enforceable against such party in accordance with its terms, except as enforceability may be limited by applicable bankruptcy, insolvency, reorganization, moratorium, liquidation or other similar laws affecting creditors' rights generally. All actions taken by Parent and its Subsidiaries pursuant or in connection with the purchase of the TUG Acquisition Assets and the Capital Stock of TUG NY, Clare, FMI Blocker, FMI Holdco and Sea Master Hong Kong have been taken in compliance with the terms of the Acquisition Documents. (e) No party to any of the Acquisition Documents is in default with respect to any of its obligations under such Acquisition Documents in any material respect and all representations and warranties made by the parties thereto in the Acquisition Documents and in the certificates delivered in connection therewith are true and correct as of the date hereof, except as waived in writing with the approval of Agent. The reports, financial statements, certificates and other written information with respect to the purchase of the TUG Acquisition Assets and the Capital Stock of TUG NY, Clare, FMI Blocker, FMI Holdco and Sea Master Hong Kong in connection with the Acquisition Documents, furnished to Agent by Borrowers, taken as a whole (as modified or supplemented by other written information so furnished), do not contain any material misstatement of fact or omit to state any material fact necessary to make the statements therein, in the light of the circumstances under which it was made, not misleading.