Detailed inspection definition

Detailed inspection means close, technical, on-site examination of materials, structure, and equipment and surveillance of the quality and methods of work, performed by one or more full-time personnel at the project site, to reasonably ensure that the project is accomplished in compliance with information in the contract documents and with good construction practices.
Sample 1Sample 2
Detailed inspection means all studies, investigations and analyses necessary to evaluate conclusively the structural safety and hydraulic capacity of a dam or reservoir and appurtenant works. This inspection may include but is not limited to soil analysis, concrete or earth stability analysis, materials testing, foundation explorations, hydrologic analysis, including basin studies and flood potential. This inspection shall be performed by a qualified registered professional engineer.
Sample 1Sample 2
Detailed inspection means a detailed, tactile asset condition inspection designed to assess the overall condition of an asset and determine its remaining useful life in line with current industry best practice set out in the British Standards Specification PAS 55 (Requirements specification for the optimal management of physical infrastructure assets) or its successor ISO 550001;
Sample 1

Examples of Detailed inspection in a sentence

  • Detailed inspection, reviewing and checking of designs and drawings not prepared by the consulting engineer and submitted by any contractor or potential contractor as alternative to those embodied in tender or similar documents prepared by the consulting engineer.

  • If the dispute cannot be settled according to paragraph 1 the parties shall agree on a procedure for alternative dispute resolution under the International Chamber of Commerce (ICC) ADR Rules (2001) within fourteen days after a termination notice under section 1 has been received by the other side.

  • Detailed inspection procedures are outlined in Volume II of this handbook.

  • Detailed inspection procedures are outlined in AOCI Manual Volume II, Chapter 4.

  • Detailed inspection efforts should be undertaken while the utility is being installed to ensure pipe bedding and trench backfill material is placed in accordance with WSDOT standards.

  • The second phase of the algo- rithm determines the shortest path for the middle n − 2 iterations of the loop.

  • Detailed inspection requirements and inspection forms (FDOTr31/dd7/91) are attached as Appendix VI.

  • Detailed inspection and reporting requirements are in Appendix VI.

  • Detailed inspection procedures are outlined in AOCI Manual Volume II, Chapter 1.

  • Detailed inspection of all coupler component and draft gears also their reclamation to be undertaken.


More Definitions of Detailed inspection

Detailed inspection means an inspection of the 20th Avenue Overpass to determine its condition by observing and recording the extent and severity of deterioration of all of its components, complemented by physical testing as warranted by condition, and includes close up inspection of all structure components using specialized equipment to provide access to components and physical testing to verify the condition of hidden components at critical areas as determined by a qualified professional engineer, resulting in an Inspection Report;
Sample 1
Detailed inspection means all studies, investigations, and analyses necessary to evaluate conclusively the structural safety and hydraulic capacity of a dam or reservoir and appurtenant works, prepared in accordance with the requirements of Section 49‑11‑150. This inspection includes, but is not limited to, soil analyses, concrete or earth stability analyses, materials testing, foundation explorations, and hydrologic analyses, including basin studies and flood potential. This inspection, investigation, or analyses must be performed by a qualified registered professional an engineer.
Sample 1

Related to Detailed inspection

  • Lead inspection means a surface-by-surface investigation to determine the presence of lead- based paint and the provisions of a report explaining the results of the investigation.

  • Home inspection means the on-site, physical review of the home of an applicant to assure the applicant and the home meets all health and safety requirements within these rules.

  • Home inspection report means a written report that is

  • Final Inspection means the process and procedure described in UGC Section 12.1.

  • Initial inspection means the first on-site inspection of facilities to verify declarations submitted pursuant to Articles III, IV, V and VI and this Annex.

  • The Inspecting Officer means the person specified in the contract for the purpose of Inspection of stores or work under the contract and includes his authorised representative;

  • Inspection Report means the report delivered by the Master Servicer or the Special Servicer, as the case may be, substantially in the form of Exhibit L hereto.

  • Inspection means activities such as measuring, examining, testing, gauging one or more characteristics of the product or service and comparing the same with the specified requirement to determine conformity.

  • Inspections has the meaning set forth in Section 4.1.2.

  • Certificate of inspection means an unsworn statement,

  • Due Diligence Examination shall have the meaning set forth in Section 3.2.

  • Onsite means within the Prescribed Premises boundary.

  • Authorized inspector means inspectors employed by the authorities responsible for boarding and inspection included in the Commission register and authorized to conduct boarding and inspection activities pursuant to these procedures;

  • Site means the place or places where the permanent Works are to be carried out including workshops where the same is being prepared.

  • Erection, construction, remodeling, repairing means all types of work done on a particular building or work at the site thereof in the construction or development of the project, including without limitation, erecting, construction, remodeling, repairing, altering, painting, and decorating, the transporting of materials and supplies to or from the building or work done by the employees of the Contractor, Subcontractor, or Agent thereof, and the manufacturing or furnishing of

  • Physical Conditions Report means, with respect to the Property, a report prepared by a company satisfactory to Lender regarding the physical condition of the Property, satisfactory in form and substance to Lender in its sole discretion, which report shall, among other things, (a) confirm that the Property and its use complies, in all material respects, with all applicable Legal Requirements (including, without limitation, zoning, subdivision and building laws) and (b) include a copy of a final certificate of occupancy with respect to all Improvements on the Property.

  • Training provider means an organization meeting the eligibility conditions as mentioned in Data Sheet and selected in accordance with the criteria set forth for the purpose.

  • Inspection Fee means a fee payable to Lender or Loan Servicer for performing any inspection required by this Agreement in an amount not to exceed $500.00 per inspection.

  • Phase I Environmental Report means a report by an Independent Person who regularly conducts environmental site assessments in accordance with then current standards imposed by institutional commercial mortgage lenders and who has a reasonable amount of experience conducting such assessments.

  • Project Management Report means each report prepared in accordance with Section 4.02 of this Agreement;

  • Inspect means the ability to review and copy a CIF to the same extent as any other document contained in a court file.

  • The Site, where applicable, means the designated project place(s) named in the bidding document.

  • Busy Line Verification (BLV) means a service whereby an End User requests an operator to confirm the busy status of a line.

  • Certified inspector means an employee or agent of a VESCP authority who (i) holds a certificate of competence from the Board in the area of project inspection or (ii) is enrolled in the Board's training program for project inspection and successfully completes such program within one year after enrollment.

  • Contractors means the bidder whose bid has been accepted by the COE;

  • Site Visit means a visit to the Site; and