Corrosion inhibitor definition

Corrosion inhibitor means a substance capable of reducing the corrosivity of water toward metal plumbing materials, especially lead and copper, by forming a protective film on the interior surface of those materials.

Corrosion inhibitor means a substance that reduces corrosion of metal plumbing materials, especially lead and cop- per, by forming a protective film on the interior surface of those materials.

Corrosion inhibitor means a substance capable of reducing the corrosivity of water toward metal plumbing materials, especially lead and copper, by forming a protective film on the interior surface of those materials. "CT or CTcalc" means the product of the residual disinfectant concentration (C) in milligrams per liter (mg/L)determined before or at the first customer, and the corresponding disinfectant contact time (T) in minutes, i.e.

Examples of Corrosion inhibitor in a sentence

• Corrosion inhibitor dosage rates shall be according to Article 1020.05(b)(10).

• Corrosion inhibitor may be used in lieu of epoxy coated reinforcing.

• Advocacy’s research demonstrates that small businesses continue to be a critical part of not only the nation’s economy, but also of local economies.

• Corrosion inhibitor shall be applied to the bridge deck surface, curbs (between headers), bridge deck sidewalks, and interior parapet walls on every bridge in this contract.

• Corrosion inhibitor can slower the corrosion rate because inhibitor compound can be adsorbed to metal surface, forming a thin layer of inhibitor which preventing contact between metal surface and corrosion media.

• A Corrosion inhibitor shall be applied to both the door frame and jamb side of the hinge leafs.

• Mahdavian, Corrosion inhibitor by lithium zinc phosphate pigment.

• Corrosion inhibitor treatment was applied to the patches in cells 2D and 3D.

• Ltd: a) Corrosion Inhibitor: Corrosion inhibitor shall consist of two components.

• Corrosion inhibitor shall be used on all connections to aluminum conductors.Single-phase and three-phase meter sockets shall be installed so that the center of the meter shall be not more than 5 feet 6 inches or less than 4 feet 0 inches above finish grade for overhead services and not more than 5 feet 6 inches or less than 3 feet 0 inches for underground services.

More Definitions of Corrosion inhibitor

Corrosion inhibitor means a substance capable of reducing the corrosivity of water toward metal plumbing materials, especially lead and copper, by forming a protective film on the interior surface of those materials. "CT or CTcalc" means the product of the residual disinfectant concentration (C) in milligrams per liter (mg/L)

Corrosion inhibitor means a substance that is capable of reducing the corrosivity of water

Corrosion inhibitor means a substance capable of reducing the corrosivity of water toward metal plumbing materials, especially lead and copper, by forming a protective film on the interior surface of those materials. "CT or CTcalc" means the product of the residual disinfectant concentration (C) (22.161) in milligrams per liter(mg/L) determined before or at the first customer, and the corresponding disinfectant contact time (T) (22.120)in minutes, i.e. "C" X "T". If a public water system applies disinfectants at more than one (1) point prior to the first customer, it must determine the CT of each disinfectant sequence before or at the first customer to determine the total percent inactivation or total inactivation ratio. In determining the total inactivation ratio, the public water system must determine the residual disinfectant concentration of each disinfection sequence and corresponding contact time before any subsequent disinfection application point(s). CT99.9 is the CT value required for 99.9 percent (3-log) inactivation of Giardia lamblia cysts. The inactivation ratio is the CTcalc divided by the CT99.9 and the total inactivation ratio is the sum of the inactivation ratios for each disinfection sequence. A total inactivation ratio equal to or greater than 1.0 is assumed to provide a 3-log inactivation of Giardia lamblia cysts.

Corrosion inhibitor means a substance capable of re- ducing the corrosivity of water toward metal plumbing materials, especially lead and copper, by forming a protective film on the in- terior surface of those materials.

Corrosion inhibitor means a substance capable of reducing the corrosivity of water toward metal plumbing materials,

Corrosion inhibitor means a substance capable of reducing the corrosivity of water toward metal