Examples of Electrostatic spray in a sentence
Electrostatic spray technology is also not considered conventional air spray because an electrostatic charge is employed to attract the coating to the workpiece.
Fill or replace as needed.● Hypochlorous Electrostatic spray is used nightly throughout classrooms and hallways.● Check hand sanitizer daily.
Electrostatic spray application can be used for prime coat, guide coat, or topcoat operations.
Electrostatic spray technology is also not considered conventional air spray because an electrostatic charge is employed to attract the coating to the workpiece.Data quality objective (DQO) approach means a set of approval criteria that must be met so that data from an alternative test method can be used in determining the capture efficiency of a control system.
Electrostatic spray application means a spray application method that uses an electrical potential to increase the transfer efficiency of the coating solids.
Specifically, the low-VOC content coatings recommendation includes a limit of 0.275 kg VOC/l (2.3 lb VOC/gal) of coating, excluding water and exempt compounds, as applied, and the use of the following application methods: Electrostatic spray, HVLP spray, flow coat, roller coat, dip coat including electrodeposition, brush coat, or other coating application method capable of achieving a transfer efficiency equivalent or better than that achieved by HVLP spraying.
Electrostatic spray means a method of applying a spray coating in which an electrical charge is applied to the coating and the substrate is grounded.
II, 3.04(d) (7/24/03)VOC-containing material shall be applied to any motorized vehicles, their parts and components, or equipment designed to be pulled by motorized vehicles using one of the following methods:• High volume, low pressure (0.1 to 10 psig air pressure for atomization) spray equipment,• Electrostatic spray equipment,• Flow coat,• Dip coat,• Brush coat,• Hand-held aerosol cans,• Roll coat, or• Air brush.
Electrostatic spray painting, duties of employer etc.as to 107Subdivision 5 — Abrasive blasting3.102.
Electrostatic spray application—A spray application method that uses an electri- cal potential to increase the transfer efficien- cy of the coatings.