CA Standards definition

CA Standards are the standards applicable to light duty vehicle GHG emissions set out at 13 Cal. Code of Regulations § 1961.3(a)-(g) and encompass all related aspects of California regulations and test procedures relevant to the implementation of those standards.
Sample 1Sample 2Sample 3

Examples of CA Standards in a sentence

  • CARB has an interest in making electrified vehicles more available and affordable, reducing climate change impacts experienced by Californians, and supporting the GHG reductions and technology development goals of the CA Standards and CARB’s statutory requirements for further GHG reductions for later model years.

  • Under CARB regulations, with the promulgation of SAFE Rule Part Two, compliance with the Federal Program is no longer deemed compliance with the CA Standards, and instead manufacturers are required to comply with the CA Standards without regard to the Federal Program beginning with the 2021 Model Year.

  • The outcome of this litigation or additional federal regulatory actions may result in two GHG compliance standards in the United States for the covered Model Years: requirements to comply with more stringent CA Standards in California and the Section 177 States; and less stringent SAFE Rule Part Two standards throughout the rest of the United States.

  • In 2013, EPA issued CARB a waiver of federal preemption for its CA Standards pursuant to Section 209 of the CAA.

  • The CA Standards include a “deemed to comply” provision such that compliance with the 2018 Federal Program is deemed as compliance with the CA Standards.

  • CARB takes the position that its authority pursuant to Health & Safety Code § 43213 among other authorities to enforce the CA Standards was illegally restricted by SAFE Rule Part One, although CARB has stated that it will not take enforcement actions as to model years covered by EPA’s waiver revocation in the SAFE Rule Part One unless and until the revoked portions of the waiver are reinstated.

  • The SAFE Rule Part One is a final agency action in which 1) EPA published a revocation of the CAA waiver of federal preemption previously granted to CARB for the CA Standards, at least as to certain Model Years, and 2) NHTSA adopted a rule declaring that state law regulations pertaining to motor vehicle emissions of carbon dioxide are preempted by the federal Energy Policy and Conservation Act (“EPCA”).

  • The SAFE Rule Part One and SAFE Rule Part Two, and the related litigation, also entail risks that California and the Section 177 States may not achieve the pollutant reduction goals they expected to result from the CA Standards.

  • Annex 1 provides further background information on each of the SCoRE CA Standards.

  • In particular, LuxCSD detects the market claims according to the requirements of the T2S CA Standards.

Related to CA Standards

  • Operating Standards shall have the meaning given such term in Section 2.1.

  • Safety Standards means all laws, union rules and trade or industry custom or codes of any kind whatsoever, in effect from the date of this Agreement through Final Acceptance of the construction work, pertaining to worker safety and accident prevention applicable to the Project and/or the construction work (including, but not limited to, rules, regulations and standards adopted pursuant to the Occupational Safety and Health Act of 1970, as amended from time to time).

  • auditing standards means auditing standards as defined in National Instrument 52-107 Acceptable Accounting Principles and Auditing Standards;

  • Reliability Standards means the criteria, standards, rules and requirements relating to reliability established by a Standards Authority.

  • Standards means the British or international standards, Authority's internal policies and procedures, Government codes of practice and guidance referred to in Framework Schedule 13 (Standards) together with any other specified policies or procedures identified in Framework Schedule 13 (Standards);

  • Codes and Standards means all the applicable codes and standards as indicated in the Technical Specification.

  • National Standards means the document entitled “National Standards for the Volatile Organic Compound Content of Canadian Commercial/Industrial Surface Coating Products Automotive Refinishing, October 1998, PN 1288" and published by the Canadian Council of Ministers of the Environment;

  • NERC Reliability Standards means the most recent version of those reliability standards applicable to the Generating Facility, or to the Generator Owner or the Generator Operator with respect to the Generating Facility, that are adopted by the NERC and approved by the applicable regulatory authorities, which are available at xxxx://xxx.xxxx.xxx/files/Reliability_Standards_Complete_Set.pdf, or any successor thereto.

  • Quality Standards means the quality standards published by BSI British Standards, the National Standards Body of the United Kingdom, the International Organisation for Standardisation or other reputable or equivalent body, (and their successor bodies) that a skilled and experienced operator in the same type of industry or business sector as the Contractor would reasonably and ordinarily be expected to comply with, and as may be further detailed in the Specification.

  • Applicable Standards means the requirements and guidelines of NERC, the Applicable Regional Entity, and the Control Area in which the Customer Facility is electrically located; the PJM Manuals; and Applicable Technical Requirements and Standards.

  • Technical Standards means the technical standards set out in paragraph 2.5 of the Order Form;

  • Minimum Standards means standards of practice that interpret the legal definition of nursing as well as provide criteria against which violations of the law can be determined.

  • Standards Board means the Professional Standards Board established pursuant to 14 Del.C. §1201.

  • Accessibility Standards means accessibility standards and specifications for Texas agency and institution of higher education websites and EIR set forth in 1 TAC Chapter 206 and/or Chapter 213.

  • Service Level Standards has the meaning ascribed thereto in Section 2.1 hereof.

  • harmonised standard means harmonised standard as defined in point (c) of point 1 of Article 2 of Regulation (EU) No 1025/2012;

  • Air Standards Manager means the Manager, Human Toxicology and Air Standards Section, Standards Development Branch, or any other person who represents and carries out the duties of the Manager, Human Toxicology and Air Standards Section, Standards Development Branch, as those duties relate to the conditions of this Certificate.

  • Pretreatment standards means all applicable Federal rules and regulations implementing Section 307 of the Act, as well as any nonconflicting State or local standards. In cases of conflicting standards or regulations, the more stringent thereof shall be applied.

  • Security Standards means the final rule implementing HIPAA’s Security Standards for the Protection of Electronic PHI, as amended.

  • Clean air standards, as used in this clause, means:

  • Water quality standards means provisions of state or federal law which consist of a designated use or uses for the waters of the Commonwealth and water quality criteria for such waters based upon such uses. Water quality standards are to protect the public health or welfare, enhance the quality of water and serve the purposes of the State Water Control Law (§ 62.1-44.2 et seq. of the Code of Virginia) and the federal Clean Water Act (33 USC § 1251 et seq.).

  • Benchmarks Regulation means Regulation (EU) 2016/1011 of the European Parliament and of the Council of 8 June 2016 on indices used as benchmarks in financial instruments and financial contracts or to measure the performance of investment funds and amending Directives 2008/48/EC and 2014/17/EU and Regulation (EU) No 596/2014;

  • Design Standards means the standards developed as a requirement of the Programmatic Agreement

  • Standards of Practice means the care, skill, and

  • Australian Accounting Standards refers to the standards of that name, as amended from time to time, that are maintained by the Australian Accounting Standards Board referred to in section 227 of the Australian Securities and Investments Commission Act 2001 (Cth);

  • Clean water standards, as used in this clause, means any enforceable limitation, control, condition, prohibition, standard, or other requirement promulgated under the Water Act or contained in a permit issued to a discharger by the Environmental Protection Agency or by a State under an approved program, as authorized by Section 402 of the Water Act (33 U.S.C. § 1342), or by local government to ensure compliance with pre-treatment regulations as required by Section 307 of the Water Act (33 U.S.C. § 1317).