Clean air standards, definition

Clean air standards, as used in this clause, means:
Sample 1Sample 2Sample 3
Clean air standards, means any enforceable rules, regulations, guidelines, standards, limitations, orders, controls, prohibitions, or other requirements which are contained in, issued under, or otherwise adopted under the Air Act or Executive Order 11738, an applicable implementation plan as described in section 110 (d) of the Air Act (42 U.S.C. 1857c-5(d)), an approved implementation procedure or plan under section 111 (c) or section 111(d), or an approved implementation procedure under section 112(d) of the Air Act (42 U.S.C. 1857c-7(d)).
Sample 1Sample 2Sample 3
Clean air standards, means any enforceable limitation, control, condition, prohibition, standard, or other requirement which is promulgated pursuant to the Water Act or contained in a permit issued to a discharger by the Environmental Protection Agency or by a State under an approved program, as authorized by Section 402 of the Water Act (33U.S.C. 1342) or by local government to ensure compliance with pretreatment regulations as required by Section 307 of the Water Act (33 U.S.C. 1317).
Sample 1Sample 2Sample 3

Examples of Clean air standards, in a sentence

  • To use his/her best efforts to comply with Clean air standards and Clean water standards at the facilities in which the contract is being performed.

  • Performance Measure 4: Clean air standards for industryPerformance Measure2012/13Forecast DiscussionThe Best Achievable Technology (BAT) approach encourages new and expanding industry to use the cleanest available practices and technologies.

  • Clean air standards are particularly important for older cities such as Philadelphia.

  • Swan Lake, Christmas Hill Nature Sanctuary, SaanichOverlooking southern Vancouver Island Performance Measure 3: Clean air standards for industry Performance Measure DiscussionThe government is working with industry to ensure that business practices support British Columbians’ environmental and health priorities, while ensuring economic sustainability.

  • Clean air standards, referred to as 'Grade D', apply to compressed air for use in .

  • Performance Measure 4: Clean air standards for industryPerformance Measure2011/12Forecast DiscussionThe Best Achievable Technology approach encourages new and expanding industry to use the cleanest available practices and technologies.

  • Clean air standards form a legal framework, but reducing emissions lies in the remit of other legislative packages.


More Definitions of Clean air standards,

Clean air standards,. , as used in this clause means:
Sample 1Sample 2Sample 3
Clean air standards, means any enforceable rules, regulations, guidelines, standards, limitations, orders, controls, prohibitions, or other requirements which are contained in, issued under, or otherwise adopted pursuant to the Air Act or Executive Order 11738, an applicable implementation plan as described in Section 110(d) of the Clean Air Act [42 USC 1857c-5(d)], an approved implementation procedure or plan under Section 111(c) or Section 111(d), respectively, of the Air Act [42 USC 1857c- 6(c)(c)] or Section 111(d), respectively, of the Air Act [42 USC 1857c-6(c)(d)], or an approved implementation procedure under Section 112(d) of the Air Act [42 USC 1857c- 7(d)]. Exhibit G (cont.)
Sample 1Sample 2
Clean air standards, as used in this clause, means—
Sample 1
Clean air standards, as used in this clause, means —
Sample 1
Clean air standards, as used in this clause, means -
Sample 1
Clean air standards, as used in this clause, means --
Sample 1

Related to Clean air standards,

  • Clean Air Act or “Act” means the federal Clean Air Act, 42 U.S.C. §§ 7401-7671q, and its implementing regulations.

  • Occupational Safety and Health Law means any Legal Requirement designed to provide safe and healthful working conditions and to reduce occupational safety and health hazards, and any program, whether governmental or private (including those promulgated or sponsored by industry associations and insurance companies), designed to provide safe and healthful working conditions.

  • Occupational Health and Safety Act means the Occupational Health and Safety Act, 1993 (Act No 85 of 1993);

  • Health and Safety Laws means any Laws pertaining to safety and health in the workplace, including the Occupational Safety and Health Act, 29 U.S.C. 651 et seq. (“OSHA”), and the Toxic Substances Control Act, 15 U.S.C. 2601, et seq. (“TSCA”).

  • Environmental, Health, and Safety Requirements means all federal, state, local and foreign statutes, regulations, ordinances and other provisions having the force or effect of law, all judicial and administrative orders and determinations, all contractual obligations and all common law concerning public health and safety, worker health and safety, and pollution or protection of the environment, including without limitation all those relating to the presence, use, production, generation, handling, transportation, treatment, storage, disposal, distribution, labeling, testing, processing, discharge, release, threatened release, control, or cleanup of any hazardous materials, substances or wastes, chemical substances or mixtures, pesticides, pollutants, contaminants, toxic chemicals, petroleum products or byproducts, asbestos, polychlorinated biphenyls, noise or radiation, each as amended and as now or hereafter in effect.

  • Environmental, Health and Safety Laws means the Comprehensive Environmental Response, Compensation and Liability Act of 1980, the Resource Conservation and Recovery Act of 1976, and the Occupational Safety and Health Act of 1970, each as amended, together with all other laws (including rules, regulations, codes, plans, injunctions, judgments, orders, decrees, rulings, and charges thereunder) of federal, state, local, and foreign governments (and all agencies thereof) concerning pollution or protection of the environment, public health and safety, or employee health and safety, including laws relating to emissions, discharges, releases, or threatened releases of pollutants, contaminants, or chemical, industrial, hazardous, or toxic materials or wastes into ambient air, surface water, ground water, or lands or otherwise relating to the manufacture, processing, distribution, use, treatment, storage, disposal, transport, or handling of pollutants, contaminants, or chemical, industrial, hazardous, or toxic materials or wastes.

  • Fair Labor Standards Act means the Fair Labor Standards Act, 29 U.S.C. §201 et seq.

  • Safe Drinking Water Act means Tit. XIV of the federal Public Health Service Act, commonly known as the “Safe Drinking Water Act”, 42 U.S.C. §300f et seq., as amended by the Safe Drinking Water Amendments of 1996, Pub. L. No. 104-182, as amended.

  • Rail Safety Act means the Rail Safety Act 1998 (WA);

  • Clean Water Act or “CWA" means the federal Clean Water Act (33 U.S.C §1251 et seq.), formerly referred to as the Federal Water Pollution Control Act or Federal Water Pollution Control Act Amendments of 1972, Public Law 92-500, as amended by Public Law 95-217, Public Law 95-576, Public Law 96-483, and Public Law 97-117, or any subsequent revisions thereto.

  • Health and Safety means, in relation to a recipient or a third person, the prevention of death or serious personal injury,

  • Accessibility Standards means accessibility standards and specifications for Texas agency and institution of higher education websites and EIR set forth in 1 TAC Chapter 206 and/or Chapter 213.

  • New Jersey Stormwater Best Management Practices (BMP) Manual or “BMP Manual” means the manual maintained by the Department providing, in part, design specifications, removal rates, calculation methods, and soil testing procedures approved by the Department as being capable of contributing to the achievement of the stormwater management standards specified in this chapter. The BMP Manual is periodically amended by the Department as necessary to provide design specifications on additional best management practices and new information on already included practices reflecting the best available current information regarding the particular practice and the Department’s determination as to the ability of that best management practice to contribute to compliance with the standards contained in this chapter. Alternative stormwater management measures, removal rates, or calculation methods may be utilized, subject to any limitations specified in this chapter, provided the design engineer demonstrates to the municipality, in accordance with Section IV.F. of this ordinance and N.J.A.C. 7:8-5.2(g), that the proposed measure and its design will contribute to achievement of the design and performance standards established by this chapter.

  • Safety Standards means all laws, union rules and trade or industry custom or codes of any kind whatsoever, in effect from the date of this Agreement through Final Acceptance of the construction work, pertaining to worker safety and accident prevention applicable to the Project and/or the construction work (including, but not limited to, rules, regulations and standards adopted pursuant to the Occupational Safety and Health Act of 1970, as amended from time to time).

  • Air Act, as used in this clause, means the Clean Air Act (42 U.S.C. 7401 et seq.).

  • Applicable Technical Requirements and Standards means those certain technical requirements and standards applicable to interconnections of generation and/or transmission facilities with the facilities of an Interconnected Transmission Owner or, as the case may be and to the extent applicable, of an Electric Distributor, as published by Transmission Provider in a PJM Manual provided, however, that, with respect to any generation facilities with maximum generating capacity of 2 MW or less (synchronous) or 5 MW or less (inverter-based) for which the Interconnection Customer executes a Construction Service Agreement or Interconnection Service Agreement on or after March 19, 2005, “Applicable Technical Requirements and Standards” shall refer to the “PJM Small Generator Interconnection Applicable Technical Requirements and Standards.” All Applicable Technical Requirements and Standards shall be publicly available through postings on Transmission Provider’s internet website.

  • Health and Safety Plan means a documented plan which addresses hazards identified and includes safe work procedures to mitigate, reduce or control the hazards identified;