Warranty Against Defective WORK Sample Clauses

Warranty Against Defective WORK. CONTRACTOR shall be responsible to NATIONAL for promptly repairing or replacing any portion of the WORK which is or becomes defective at any time (a) within one year after the date of issuance (but not the deemed issuance) of the Certificate of Substantial Completion by NATIONAL, or (b) subject to the next succeeding sentence, within seventeen and one-half (17.5) months from the date of issuance of the No Load Test Completion Certificate if there is a deemed issuance of the Certificate of Substantial Completion hereunder (herein referred to as the "DEEMED WARRANTY PERIOD"), or (c) within such longer warranty period applicable thereto, regardless of when such defect is discovered; provided, however, that with respect to any equipment, materials or services which are defective and which are corrected (either by CONTRACTOR or by NATIONAL, if CONTRACTOR fails to make such corrections), then the warranty with respect to such equipment, materials or service shall extend for one (1) year from the date of correction. No such DEEMED WARRANTY PERIOD shall apply under this Section 34.2, and the one-year warranty period shall begin to run as of the date of issuance, or deemed issuance, as the case may be, of the Certificate of Substantial Completion unless (i) CONTRACTOR shall have given to NATIONAL timely notice(s) that a FAILURE OF NATIONAL PERFORMANCE TEST CONDITIONS is preventing the issuance of the Certificate of Substantial Completion, which notice shall set forth in detail the specific basis for CONTRACTOR's belief that the delay is being caused by a FAILURE OF NATIONAL PERFORMANCE TEST CONDITIONS, (ii) no act or omission of CONTRACTOR or any SUBCONTRACTOR prevents the issuance of the Certificate of Substantial Completion, and (iii) either the parties have agreed, or a court of law has determined, that such delay was indeed caused by a FAILURE OF NATIONAL PERFORMANCE TEST CONDITIONS. CONTRACTOR shall provide the aforementioned notice(s) within thirty (30) days after the beginning of such delay by NATIONAL. No such deemed commencement of the warranty period shall occur if there is a dispute between NATIONAL and CONTRACTOR with regard to CONTRACTOR's assertion that the delay is caused by a FAILURE OF NATIONAL PERFORMANCE TEST CONDITIONS or with respect to the quality of the WORK or the conformity of the WORK to the CONTRACT DOCUMENTS. In the event that there is a dispute as to whether the warranty period has expired, and NATIONAL requests CONTRACTOR to perform se...
AutoNDA by SimpleDocs

Related to Warranty Against Defective WORK

  • Latent Defects Seller has no actual knowledge of any latent defects on, in, under or above the Land, the Lots or the Improvements (to the extent completed as of the date of this Agreement). For purposes of this representation, the actual knowledge of Seller shall mean the actual knowledge of only Xxxxxxxx X. Xxxx and no other person. 7.2

  • Correction of Defects To promptly correct any structural defects in the Improvements or any material departure from the Plans and Specifications not previously approved by Lessor. The advance of any Development Financing proceeds shall not constitute a waiver of Lessor's right to require compliance with this covenant.

  • Breach of Representations or Warranties Any representation or warranty made by the Borrower to the Lenders or the Administrative Agent under this Agreement, or any certificate or information delivered in connection with this Agreement, shall be false in any material respect when made or deemed made.

  • Product Warranty Each product manufactured, sold, leased, or delivered by the Company has been in conformity with all applicable contractual commitments and all express and implied warranties, and the Company has no Liability (and there is no basis for any present or future action, suit, proceeding, hearing, investigation, charge, complaint, claim, or demand against any of them giving rise to any Liability) for replacement or repair thereof or other damages in connection therewith, subject only to the reserve for product warranty claims set forth on the face of the balance sheet included in the Interim Financial Statements (rather than in any notes thereto) as adjusted for the passage of time through the Closing Date in accordance with the past custom and practice of the Company. No product manufactured, sold, leased, or delivered by the Company is subject to any guaranty, warranty, or other indemnity beyond the applicable standard terms and conditions of sale or lease. Section 4.22 of the Disclosure Schedule includes copies of the standard terms and conditions of sale or lease for the Company (containing applicable guaranty, warranty, and indemnity provisions).

  • REMEDY OF DEFECTS (a) The BUILDER shall remedy, at its expense, any Defect against which the VESSEL is guaranteed under this Article, by making all necessary repairs or replacements at the Shipyard.

  • Product Warranty and Product Liability Schedule 5.17 of the Disclosure Schedule contains a true, correct and complete copy of Company’s standard warranty or warranties for sales of Products (as defined below) and, except as stated therein, there are no warranties, commitments or obligations with respect to the return, repair or replacement of Products. Schedule 5.17 of the Disclosure Schedule contains a description of all product liability claims and similar claims, actions, litigation and other proceedings relating to Products which are presently pending or which to Company’s knowledge are threatened, or which have been asserted or commenced against Company within the last two (2) years, in which a party thereto either requests injunctive relief (whether temporary or permanent) or alleges damages in excess of $100,000.00 (whether or not covered by insurance). To the best of the Company’s knowledge, there are no defects in design, construction or manufacture of Products which would adversely affect performance or create an unusual risk of injury to persons or property. Except as set forth on Schedule 5.17, none of the Products has been the subject of any replacement, field fix, retrofit, modification or recall campaign other than in the ordinary course of business. The Products have been designed and manufactured so as to meet and comply with all governmental standards and specifications currently in effect, and have received all governmental approvals necessary to allow their sale and use. As used herein, the term “Products” means any and all products currently or at any time previously manufactured, distributed or sold by Company, or by any predecessor of Company under any brand name or xxxx under which products are or have been manufactured over the last three (3) years, distributed or sold by Company, in or through the Business. [*] = CERTAIN CONFIDENTIAL INFORMATION CONTAINED IN THIS DOCUMENT, MARKED BY BRACKETS, HAS BEEN OMITTED AND FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE COMMISSION PURSUANT TO RULE 24b-2 OF THE SECURITIES EXCHANGE ACT OF 1934, AS AMENDED.

  • Defective Product If Client rejects Products under Section 6.1 and the deviation is determined to have arisen from Patheon’s failure to provide the Manufacturing Services in accordance with the Specifications, cGMPs, or Applicable Laws, Patheon will credit Client’s account for Patheon’s invoice price for the defective Products. If Client previously paid for the defective Products, Patheon will promptly, at Client’s election, either: (i) refund the invoice price for the defective THIS EXHIBIT HAS BEEN REDACTED AND IS THE SUBJECT OF A CONFIDENTIAL TREATMENT REQUEST. REDACTED MATERIAL IS MARKED WITH [***] AND HAS BEEN FILED SEPARATELY WITH THE SECURITIES AND EXCHANGE COMMISSION. Products; (ii) offset the amount paid against other amounts due to Patheon hereunder; or (iii) replace the Products with conforming Products without Client being liable for payment therefor under Section 3.1, contingent upon the receipt from Client of all Active Materials and Client-Supplied Components required for the manufacture of the replacement Products. For greater certainty, Patheon’s responsibility for any loss of Active Materials in defective Product will be captured and calculated in the Active Materials Yield under Section 2.2.

  • Defective Products None of the Group Companies has manufactured, sold or supplied products which are, or were, in any material respect, faulty or defective, or which do not comply in any material respect with any representations or warranties expressly made by such Group Company, or with all applicable regulations, standards and requirements.

  • Disclaimer of Implied Warranties EACH PARTY DISCLAIMS ALL WARRANTIES IN RESPECT OF GOODS OR SERVICES SUPPLIED BY IT UNDER THIS AGREEMENT THAT ARE IMPLIED BY LAW OR BY THE TERMS OF THE AGREEMENT, EXCEPT FOR THE WARRANTIES SET FORTH IN SECTION 2.1. THIS DISCLAIMER SHALL NOT BE CONSTRUED TO NEGATE OR LIMIT ANY WARRANTY OF TITLE OR RIGHT TO SELL IMPLIED BY LAW OR CUSTOM OF TRADE AND EACH PARTY EXPRESSLY WARRANTS, IN RESPECT OF ALL GOODS TO BE SOLD, THAT IT WILL HAVE AND WILL CONVEY TO OFFICEMAX GOOD AND MERCHANTABLE TITLE TO SUCH GOODS AND THAT IT WILL WARRANT AND DEFEND SUCH TITLE AGAINST THE CLAIMS OF ALL PERSONS WHATSOEVER.

  • Environmental Conditions A Phase I environmental site assessment (or update of a previous Phase I and or Phase II environmental site assessment) and, with respect to certain Mortgage Loans, a Phase II environmental site assessment (collectively, an “ESA”) meeting ASTM requirements conducted by a reputable environmental consultant in connection with such Mortgage Loan within 12 months prior to its origination date (or an update of a previous ESA was prepared), and such ESA (i) did not identify the existence of Recognized Environmental Conditions (as such term is defined in ASTM E1527-05 or its successor, hereinafter “Environmental Condition”) at the related Mortgaged Property or the need for further investigation, or (ii) if the existence of an Environmental Condition or need for further investigation was indicated in any such ESA, then at least one of the following statements is true: (A) an amount reasonably estimated by a reputable environmental consultant to be sufficient to cover the estimated cost to cure any material noncompliance with applicable Environmental Laws or the Environmental Condition has been escrowed by the related Mortgagor and is held or controlled by the related lender; (B) if the only Environmental Condition relates to the presence of asbestos-containing materials, radon in indoor air, lead based paint or lead in drinking water, the only recommended action in the ESA is the institution of such a plan, an operations or maintenance plan has been required to be instituted by the related Mortgagor that can reasonably be expected to mitigate the identified risk; (C) the Environmental Condition identified in the related environmental report was remediated, abated or contained in all material respects prior to the date hereof, and, if and as appropriate, a no further action, completion or closure letter or its equivalent, was obtained from the applicable governmental regulatory authority (or the Environmental Condition affecting the related Mortgaged Property was otherwise listed by such governmental authority as “closed” or a reputable environmental consultant has concluded that no further action or investigation is required); (D) an environmental policy or a lender’s pollution legal liability insurance policy that covers liability for the Environmental Condition was obtained from an insurer rated no less than “A-” (or the equivalent) by Xxxxx’x, S&P and/or Fitch; (E) a party not related to the Mortgagor was identified as the responsible party for the Environmental Condition and such responsible party has financial resources reasonably estimated to be adequate to address the situation; or (F) a party related to the Mortgagor having financial resources reasonably estimated to be adequate to address the situation is required to take action. To Seller’s knowledge, except as set forth in the ESA, there is no Environmental Condition at the related Mortgaged Property.

Time is Money Join Law Insider Premium to draft better contracts faster.