Lake Patience Road Segment Sample Clauses

Lake Patience Road Segment. Prior to approval of the first record plat (or construction plan where no plat is required) for the 601st du or equivalent in p.m. peak-hour trips, or within six months of COUNTY completion of the connection of Lake Patience from U.S. 41 to the existing terminus in the Oakstead MPUD Master Planned Unit Development No. 78, whichever occurs first, the DEVELOPER shall complete design, permitting, and construction of Lake Patience Road from Sunlake Boulevard to the existing terminus in the Oakstead MPUD Master Planned Unit Development, No. 78, and associated drainage, wetland, and floodplain mitigation facilities consistent with COUNTY-approved design and construction plans as a two (2) lane, undivided, urban section (offset) including all Roadway Appurtenances necessary for a four (4) lane, divided, urban roadway and all intersection improvements depicted on Exhibit F within or adjacent to this segment (hereinafter Lake Patience Road Segment). The COUNTY acknowledges that donation or dedication of right-of-way required for the Lake Patience Road Segment and all associated drainage, wetland, and floodplain mitigation, and bicycle and pedestrian facilities is presently an obligation of the Concord Station (f.k.a. LeDantec) MPUD Master Planned Unit Development pursuant to the Concord Station (f.k.a. LeDantec) Master Planned Unit Development Conditions of Approval, Condition No. 16 (Rezoning Petition No. 3758 as amended by Petition No. 5976 approved by the COUNTY on February 14, 2006), and the DA between the COUNTY and JDI Land, LLC, for Roadway Development of the LeDantec MPUD Master Planned Unit Development, Condition Nos. 5(a) and 7(a) (approved by the COUNTY on January 27, 2004) and is subject to the terms and conditions of such approvals and agreements, as may be modified from time to time.
AutoNDA by SimpleDocs

Related to Lake Patience Road Segment

  • Wire Unbundled DS1 Digital Loop This is a designed 4-wire Loop that is provisioned according to industry standards for DS1 or Primary Rate ISDN services and will come standard with a test point, OC, and a DLR. A DS1 Loop may be provisioned over a variety of loop transmission technologies including copper, HDSL-based technology or fiber optic transport systems. It will include a 4-Wire DS1 Network Interface at the End User’s location.

  • Surgery Services This plan covers surgery services to treat a disease or injury when: • the operation is not experimental or investigational, or cosmetic in nature; • the operation is being performed at the appropriate place of service; and • the physician is licensed to perform the surgery. Preauthorization may be required for certain surgical services. Reconstructive Surgery for a Functional Deformity or Impairment This plan covers reconstructive surgery and procedures when the services are performed to relieve pain, or to correct or improve bodily function that is impaired as a result of: • a birth defect; • an accidental injury; • a disease; or • a previous covered surgical procedure. Functional indications for surgical correction do not include psychological, psychiatric or emotional reasons. This plan covers the procedures listed below to treat functional impairments. • abdominal wall surgery including panniculectomy (other than an abdominoplasty); • blepharoplasty and ptosis repair; • gastric bypass or gastric banding; • nasal reconstruction and septorhinoplasty; • orthognathic surgery including mandibular and maxillary osteotomy; • reduction mammoplasty; • removal of breast implants; • removal or treatment of proliferative vascular lesions and hemangiomas; • treatment of varicose veins; or • gynecomastia. Preauthorization may be required for these services.

  • Dark Fiber Loop 2.8.4.1 Dark Fiber Loop is an unused optical transmission facility, without attached signal regeneration, multiplexing, aggregation or other electronics, from the demarcation point at an End User’s premises to the End User’s serving wire center. Dark Fiber Loops may be strands of optical fiber existing in aerial or underground structure. BellSouth will not provide line terminating elements, regeneration or other electronics necessary for AFN to utilize Dark Fiber Loops.

  • Data Services In lieu of any other rates or discounts, the Customer will receive a discount of 20% for the following Data Services: Access: Standard VBS2 Guide local loop charges for DS1 and DS-3 Access Service.

  • Loop A transmission path that extends from a Main Distribution Frame or functionally comparable piece of equipment in a Customer's serving End Office, to the Rate Demarcation Point (or NID if installed at the Rate Demarcation Point) in or at the Customer's premises. The actual transmission facilities used to provide a Loop may utilize any of several technologies.

  • Our Services As insurance intermediaries we generally act as the agent of our client. We are subject to the law of agency, which imposes various duties on us. However, in certain circumstances we may act for and owe duties of care to other parties, including the insurer. We will advise you when these circumstances occur, so you will be aware of any possible conflict of interest. We offer a wide range of products and services which may include: • Offering you a single or range of products from which to choose a product that suits your insurance needs; • Advising you on your insurance needs; • Arranging suitable insurance cover with insurers to meet your requirements; • Helping you with any subsequent changes to your insurance you have to make; • Providing all reasonable assistance with any claim you make. In some cases, we act for insurers under a delegated authority agreement and can enter into insurance policies, issue policy documentation and/or handle or settle claims on their behalf. Where we act on behalf of the insurer and not you, we will notify you accordingly and in relation to claims we will advise you of this fact when you notify us of a claim. Notwithstanding this, we endeavour to always act in your best interest. As intermediaries, we offer a wide range of insurance products and have access to many leading insurance companies and the Lloyd’s market. Depending on the type of cover you require and where we have provided advice based on a personal recommendation, we will offer you a policy from either: • a single insurer; • a limited range of insurers; or • a fair analysis that is representative of the insurance market. We will advise you separately as to which of these apply before we arrange your policy and where we have not undertaken a fair analysis of the market, we will provide you with a list of insurers considered. Jensten Retail Consumer Client TOBA Version 1.0 Nov 2021 Policies taken out, amended, or renewed through our online service will be on a non-advised basis. This means sufficient information will be provided for you to make an informed decision about any product purchased online and you should therefore ensure that any policy provides the cover you require and is suitable for your needs. For Motor Vehicle insurance we require customers to pay an additional charge for our claims service – Coversure Claimsline (details are provided in a separate document). This is a “one-stop” service that enables us to assist you with any claim you may incur. The cost of the Coversure Claimsline services will be included in the price quoted to you for the Motor Vehicle insurance and shown separately in your documentation. By purchasing motor insurance from us, you authorise Coversure and its agents to take all necessary actions to handle your claim including dealing with your insurers, third parties and their insurers and other service suppliers on your behalf. For all other policies, including optional additional products and premium finance (if relevant), before the insurance contract is concluded and after we have assessed your demands & needs, we will provide you with advice and make a personal recommendation. This will include sufficient information to enable you to make an informed decision about the policy that we have recommended, together with a quotation which will itemise any fees that are payable in addition to the premium. This documentation will also include a statement of your demands and needs. You should read this carefully as it will explain reasons for making the recommendation we have made.

  • Customer Services Customer Relationship Management (CRM): All aspects of the CRM process, including planning, scheduling, and control activities involved with service delivery. The service components facilitate agencies’ requirements for managing and coordinating customer interactions across multiple communication channels and business lines. Customer Preferences: Customizing customer preferences relative to interface requirements and information delivery mechanisms (e.g., personalization, subscriptions, alerts and notifications).

  • Beta Services From time to time, We may invite You to try Beta Services at no charge. You may accept or decline any such trial in Your sole discretion. Beta Services will be clearly designated as beta, pilot, limited release, developer preview, non-production, evaluation or by a description of similar import. Beta Services are for evaluation purposes and not for production use, are not considered “Services” under this Agreement, are not supported, and may be subject to additional terms. Unless otherwise stated, any Beta Services trial period will expire upon the earlier of one year from the trial start date or the date that a version of the Beta Services becomes generally available. We may discontinue Beta Services at any time in Our sole discretion and may never make them generally available. We will have no liability for any harm or damage arising out of or in connection with a Beta Service.

  • Electric Storage Resources Developer interconnecting an electric storage resource shall establish an operating range in Appendix C of its LGIA that specifies a minimum state of charge and a maximum state of charge between which the electric storage resource will be required to provide primary frequency response consistent with the conditions set forth in Articles 9.5.5, 9.5.5.1, 9.5.5.2, and 9.5.5.3 of this Agreement. Appendix C shall specify whether the operating range is static or dynamic, and shall consider (1) the expected magnitude of frequency deviations in the interconnection; (2) the expected duration that system frequency will remain outside of the deadband parameter in the interconnection; (3) the expected incidence of frequency deviations outside of the deadband parameter in the interconnection; (4) the physical capabilities of the electric storage resource; (5) operational limitations of the electric storage resources due to manufacturer specification; and (6) any other relevant factors agreed to by the NYISO, Connecting Transmission Owner, and Developer. If the operating range is dynamic, then Appendix C must establish how frequently the operating range will be reevaluated and the factors that may be considered during its reevaluation. Developer’s electric storage resource is required to provide timely and sustained primary frequency response consistent with Article 9.5.5.2 of this Agreement when it is online and dispatched to inject electricity to the New York State Transmission System and/or receive electricity from the New York State Transmission System. This excludes circumstances when the electric storage resource is not dispatched to inject electricity to the New York State Transmission System and/or dispatched to receive electricity from the New York State Transmission System. If Developer’s electric storage resource is charging at the time of a frequency deviation outside of its deadband parameter, it is to increase (for over-frequency deviations) or decrease (for under-frequency deviations) the rate at which it is charging in accordance with its droop parameter. Developer’s electric storage resource is not required to change from charging to discharging, or vice versa, unless the response necessitated by the droop and deadband settings requires it to do so and it is technically capable of making such a transition.

  • ELECTRICAL SERVICES A. Landlord shall provide electric power for a combined load of 3.0 xxxxx per square foot of useable area for lighting and for office machines through standard receptacles for the typical office space.

Time is Money Join Law Insider Premium to draft better contracts faster.