Dark Fiber Loop definition

Dark Fiber Loop is fiber within an existing fiber optic cable that has not yet been activated through optronics to render it capable of carrying communications services.
Sample 1Sample 2Sample 3
Dark Fiber Loop consists of continuous fiber optic strand(s) in a Verizon fiber optic cable between the fiber distribution frame, or its functional equivalent, located within a Verizon Wire Center, and Verizon’s main termination point, such as the fiber patch panel located within a Customer premise, and that has not been activated through connection to the electronics that “light” it, and thereby render it capable of carrying Telecommunications Services. In addition to the other terms and conditions of this Agreement, the following terms and conditions also shall apply to Dark Fiber Loops:
Sample 1Sample 2Sample 3
Dark Fiber Loop is hereby deleted. The definition of “High Frequency Spectrum Unbundled Network Element” (“HFS UNE”) is hereby deleted. The definition of “Non-qualifying Service” is hereby deleted. The definition of “Qualifying Service” is hereby deleted. Part E of the Agreement, “Network Elements” Sections 42 - 60.2.2, is hereby deleted and replaced in its entirety with the following:
Sample 1

Examples of Dark Fiber Loop in a sentence

  • Qwest is not required to provide CLEC with access to a Dark Fiber Loop on an unbundled basis except for UDF-MTE Subloop below.

  • Sprint will provide CLEC Dark Fiber Loops on an unbundled basis except where the Commission or FCC has determined that requesting Telecommunication Carriers are not impaired without access to a Dark Fiber Loop to a specific customer location.

  • Embarq is not required to provide CLEC with access to Dark Fiber Loop on an unbundled basis.

  • If CLEC has not submitted an LSR or ASR, as applicable, to SBC requesting that the Affected Dark Fiber Loop and Transport arrangements be disconnected and returned to SBC, SBC shall disconnect such arrangements that remain in place as of September 11, 2006.

  • To the extent applicable, the same terms and conditions regarding Dark Fiber Loop UNEs set forth in Section 2.1(g) shall govern Dark Fiber Transport UNE.

  • BellSouth is not required to place the fiber for Dark Fiber Loop if none is available.

  • Dark Fiber Loop is fiber within an existing fiber optic Page 76 of 327 Attachment 2 - Network Elements & Other Services/BELLSOUTH TELECOMMUNICATIONS, Inc.

  • SPRINT shall order Dark Fiber Transport, Dark Fiber Loop and Dark Fiber Subloop UNEs by sending to VERIZON an ASR.

  • CenturyLink is not required to provide CLEC with access to Dark Fiber Loop on an unbundled basis.

  • Verizon shall connect a Dark Fiber Loop to the demarcation point by installing a fiber jumper.


More Definitions of Dark Fiber Loop

Dark Fiber Loop means two fiber optic strands (a pair) located within a Verizon fiber optic cable sheath between an accessible terminal (such as the fiber distribution frame, or its functional equivalent) located in a Verizon Wire Center end office and Verizon's accessible terminal located in Verizon's main termination point at the premises of a Customer (such as a fiber patch panel), but that are not connected to any equipment used or that can be used to transmit and receive telecommunications traffic. A “Dark Fiber IOF” means two fiber optic strands (a pair) that are located within a fiber optic cable sheath between either (a) accessible terminals in two or more Verizon central offices or (b) an accessible terminal in a Verizon central office and an accessible terminal in an AT&T central office, but, in either case, that are not connected to any equipment used or that can be used to transmit and receive telecommunications traffic. Verizon shall not be required to perform splicing to provide fiber continuity between two locations. When AT&T submits an order for a Dark Fiber Loop or a Dark Fiber IOF, such fiber may not conform to industry transmission standards, either the ones in effect when Verizon installed such fiber or the ones in effect at the time of such order. Notwithstanding anything else set forth in this Agreement, Verizon shall provide AT&T with access to Dark Fiber Loops and Dark Fiber IOF in accordance with, but only to the extent required by, Applicable Law.
Sample 1
Dark Fiber Loop means two continuous fiber optic strands (a pair) located within a BA fiber optic cable sheath between a BA end office and the premises of a Customer but that are not connected to any equipment used or that can be used to transmit and receive telecommunications traffic. A “Dark Fiber IOF” means two continuous fiber optic strands (a pair) that are located within a fiber optic cable sheath between either (a) two BA central offices or (b) a BA central office and a NEXTLINK central office, but, in either case, that are not connected to any equipment used or that can be used to transmit and receive telecommunications traffic. A strand shall not be deemed to be continuous if a new splice or other means of connection must be installed in order to provide fiber continuity between two locations. When NEXTLINK submits an order for a Dark Fiber Loop or a Dark Fiber IOF, such fiber may not conform to industry transmission standards, either the ones in effect when BA installed such fiber or the ones in effect at the time of such order. Notwithstanding anything else set forth in this Amendment or in the Interconnection Agreement, BA shall provide NEXTLINK with access to Dark Fiber Loops and Dark Fiber IOF in accordance with, but only to the extent required by, Applicable Law.
Sample 1

Related to Dark Fiber Loop

  • Dark Fiber shall have the meaning set forth in Section 9.7.1.

  • Customer-generator means a user of a net metering system.

  • Digital Cross Connect System or "DCS" is a function which provides automated Cross Connection of Digital Signal Level 0 (DS0) or higher transmission bit rate digital channels within physical interface facilities. Types of DCS include but are not limited to DCS 1/0s, DCS 3/1s, and DCS 3/3s, where the nomenclature 1/0 denotes interfaces typically at the DS1 rate or greater with Cross Connection typically at the DS0 rate. This same nomenclature, at the appropriate rate substitution, extends to the other types of DCS specifically cited as 3/1 and 3/3. Types of DCS that cross connect Synchronous Transport Signal level 1 (STS-1 s) or other Synchronous Optical Network (SONET) signals (e.g., STS-3) are also DCS, although not denoted by this same type of nomenclature. DCS may provide the functionality of more than one of the aforementioned DCS types (e.g., DCS 3/3/1 which combines functionality of DCS 3/3 and DCS 3/1). For such DCS, the requirements will be, at least, the aggregation of requirements on the "component" DCS. In locations where automated Cross Connection capability does not exist, DCS will be defined as the combination of the functionality provided by a Digital Signal Cross Connect (DSX) or Light Guide Cross Connect (LGX) patch panels and D4 channel banks or other DS0 and above multiplexing equipment used to provide the function of a manual Cross Connection. Interconnection is between a DSX or LGX to a Switch, another Cross Connection, or other service platform device.

  • Beam axis means a line from the source through the centers of the x-ray fields.

  • Universal Digital Loop Carrier (UDLC means the DLC system that has a CO terminal channel bank that is connected to the CO switches on the analog side.

  • Copper Loop A stand-alone Local Loop comprised entirely of copper wire or copper cable. Copper Loops include two-wire and four-wire analog voice-grade Copper Loops, digital Copper Loops (e.g., DS0s and Integrated Services Digital Network lines), as well as two-wire and four-wire Copper Loops conditioned to transmit the digital signals needed to provide digital subscriber line services, regardless of whether the Copper Loops are in service or held as spares. A Copper Loop includes attached electronics using Time Division Multiplexing (TDM) technology, but does not include packet, cell or frame switching capabilities.

  • Public School Student Accessing Courses at a Distance means a student who is scheduled for a full course load through the District and attends all classes virtually.

  • Firefighter means any regular, paid or volunteer, member of a lawfully constituted fire department of a municipal corporation, township, fire district, or village.

  • Cannabis processing facility means a person that:

  • Network Rail means Network Rail Infrastructure Limited, a company registered in England under company number 02904587 and having its registered office at 0 Xxxxxxxxx Xxxxxx, Xxxxxx XX0 0XX;

  • snippetLinks [{"key":"specifically","type":"clause","offset":[20,32]},{"key":"provided-herein","type":"clause","offset":[33,48]},{"key":"at-the-closing","type":"clause","offset":[50,64]},{"key":"the-parties-shall","type":"clause","offset":[65,82]},

  • Micro wireless facility means a small cell facility that is not larger in dimension than 24 inches in length, 15 inches in width, and 12 inches in height and that has an exterior antenna, if any, not longer than 11 inches.

  • business vertical means a distinguishable component of an enterprise that is engaged in the supply of individual goods or services or a group of related goods or services which is subject to risks and returns that are different from those of the other business verticals.

  • Terminals means, collectively (a) the Initial Terminals; and (b) any other terminals, storage facilities, wharfage, tankage and loading racks owned or leased by any Loan Party that are used in the Business.

  • Spectrum Compatibility means the capability of two (2) copper loop transmission system technologies to coexist in the same cable without service degradation and to operate satisfactorily in the presence of cross talk noise from each other. Spectrum compatibility is defined on a per twisted pair basis for specific well-defined transmission systems. For the purposes of issues regarding Spectrum Compatibility, service degradation means the failure to meet the Bit Error Ratio (BER) and Signal-to-Noise Ratio (SNR) margin requirements defined for the specific transmission system for all Loop lengths, model Loops, or loss values within the requirements for the specific transmission system.

  • Secure Network means a network which is only accessible by Secure Authentication.

  • Fiber means a glass strand or strands which is/are protected by a color coded buffer tube and which is/are used to transmit a communication signal along the glass strand in the form of pulses of light.

  • Suction outlet means the opening or fitting through which the water under negative pressure is drawn from the pool or spa.

  • X-ray high-voltage generator means a device which transforms electrical energy from the potential supplied by the x-ray control to the tube operating potential. The device may also include means for transforming alternating current to direct current, filament transformers for the x-ray tube(s), high-voltage switches, electrical protective devices, and other appropriate elements.

  • High voltage bus means the electrical circuit, including the coupling system for charging the REESS, that operates on a high voltage.

  • Interconnection Service(s means any Interconnection, Resale Services, 251(c)(3) UNEs, Collocation, functions, facilities, products or services offered under this Agreement.

  • Integrated Digital Loop Carrier means a subscriber loop carrier system that is twenty-four (24) local Loop transmission paths combined into a 1.544 Mbps digital signal which integrates within the switch at a DS1 level.

  • Gateway means the BT electronic gateway, used for all ordering or fault reporting as described in the relevant section of the Handbook;

  • Carrier Access Billing System (“CABS”) is the system which is defined in a document prepared under the direction of the Billing Committee of the OBF. The CABS document is published by Telcordia in Volumes 1, 1A, 2, 3, 3A, 4 and 5 as Special Reports SR-OPT-001868, SR-OPT-0011869, SR-OPT-001871, SR-OPT- 001872, SR-OPT-001873, SR-OPT-001874, and SR-OPT-001875, respectively, and contains the recommended guidelines for the billing of access and other connectivity services. Sprint’s carrier access billing system is its Carrier Access Support System (CASS). CASS mirrors the requirements of CABS.

  • Rack means a mechanism for delivering motor vehicle fuel or diesel from a refinery or terminal into a truck, trailer, railroad car, or other means of non-bulk transfer.

  • High terrain means any area having an elevation 900 feet or more above the base of the stack of a source.