Buoy System Connection and Disconnection Sample Clauses

Buoy System Connection and Disconnection. The Vessel shall be fitted and capable of connecting, disconnecting and performing regasified LNG discharge operations through the Buoy System in accordance with the SRV Operating Manual. Upon reaching a distance of three (3) nautical miles from the Buoy System, the Vessel shall be capable of safely approaching, retrieving and completing all connection operations to the Buoy System (including but not limited to cooling down vaporizers and piping and pressurizing risers) and be capable of being ready to commence regasified LNG discharge operations in a time of no more than six (6) hours, when operating in normal conditions as provided in the SRV Operating Manual, with no adverse influence from swell. Interference from any other marine activities shall not be an exception to this standard. Upon completion of regasified LNG discharge and the complete securing of all cargo-related operations (including limited depressurizing of the Buoy System and risers as required based on the operational requirements relating to the Buoy System), the Vessel shall be capable of disconnecting from the Buoy System, restoring the Buoy System for retrieval by a subsequent vessel, and proceeding en route, in a time of no more than two (2) hours when operating in normal conditions as provided in the SRV Operating Manual with no adverse influence from swell. Interference from any other marine activities shall not be an exception to this standard. Execution version re Hull 1689 SCHEDULE II TO LNG CARRIER TIME CHARTER PARTY DATED MARCH 2007 BUILDING CONTRACT AND SPECIFICATIONS The following documents have been executed and are attached hereto for reference: • Shipbuilding Contract for the Construction and Sale of one (1) LNG carrier (Hull no. 1689) fitted out as an SRV by and between Owner, as buyer, end Samsung Heavy Industries Co., Ltd., as Builder, dated 7 April 2006 • Specifications (Hull no. 1689) dated 5 April 2006 (ref. No. GS05171.FS02). Execution version re Hull 1689 SPECIFIC TERMS IN THIS EXHIBIT HAVE BEEN REDACTED BECAUSE CONFIDENTIAL TREATMENT FOR THOSE TERMS HAS BEEN REQUESTED. THE REDACTED MATERIAL HAS BEEN SEPARATELY FILED WITH THE SECURITIES AND EXCHANGE COMMISSION, AND THE TERMS HAVE BEEN MARKED AT THE APPROPRIATE PLACE WITH FIVE ASTERISKS (*****). SCHEDULE III TO SRV LNG CARRIER TIME CHARTER PARTY DATED MARCH 2007
AutoNDA by SimpleDocs

Related to Buoy System Connection and Disconnection

  • Interconnection If Manager desires to interconnect a portion of the Service Area Network with another carrier and Sprint PCS can interconnect with that carrier at a lower rate, then to the extent permitted by applicable laws, tariffs and contracts, Sprint PCS may arrange for the interconnection under its agreements with the carrier and if it does so, Sprint PCS will xxxx the interconnection fees to Manager.

  • Infrastructure (a) The Borrower has and will maintain a sufficient infrastructure to conduct its business as presently conducted and as contemplated to be conducted following its execution of this Agreement.

  • Metering 1. If the Producer desires to sell electric power to the Company, the Company shall provide, own and maintain at the Producer's expense all necessary meters and associated equipment to be utilized for the measurement of energy and capacity for determining the Company's payment to the Producer pursuant to an applicable agreement.

  • Sprinkler System If there now is or shall be installed in the Building a "sprinkler system", and such system or any of its appliances shall be damaged or injured or not in proper working order by reason of any act or omission of Tenant, Tenant's agents, servants, employees, licensees or visitors, Tenant shall forthwith restore the same to good working condition at its own expense; and if the New York Board of Fire Underwriters or the New York Fire Insurance Rating Organization or any bureau, department or official of the state or city government, shall require or recommend that any changes, modifications, alterations or additional sprinkler heads or other equipment be made or supplied by reason of Tenant's business, or the location of the partitions, trade fixtures, or other contents of the Premises, Tenant shall, at Tenant's expense, promptly make and supply such changes, modifications, alterations, additional sprinkler heads or other equipment.

  • Communications Equipment Members of the board of directors or any committee thereof may participate in and act at any meeting of such board or committee through the use of a conference telephone or other communications equipment by means of which all persons participating in the meeting can hear each other, and participation in the meeting pursuant to this section shall constitute presence in person at the meeting.

  • Permitted Use and Disclosures Each Party hereto may use or disclose Information disclosed to it by the other Party to the extent such use or disclosure: (i) is reasonably necessary in complying with Applicable Laws or otherwise submitting information to tax or other governmental authorities, (ii) is provided by the receiving Party to Third Parties, on a strictly as-needed basis, for consulting services, conducting Preclinical or Clinical Development, CMC/Process Development, Manufacturing, external testing, market research, or otherwise exercising its rights or performing its obligations hereunder; provided, that such Third Parties are obligated to maintain the confidentiality of such other Party’s Information as set forth herein for the benefit of such other Party for a period of at least the term of the agreement with such Third Party and for a period of *** thereafter; (iii) is included in submissions by the receiving Party to Governmental Authorities to facilitate the issuance of approvals for NDAs and NDA Equivalents for the Product, provided that reasonable measures shall be taken to assure confidential treatment of such Information; or (iv) is to Third Parties in connection with a receiving Party’s efforts to secure financing or enter into strategic partnerships, provided such Information is disclosed only on a need-to-know basis and under confidentiality provisions at least as stringent as those in this Agreement. Additionally, Bayer may disclose to Mitsui any Information received from Licensee hereunder; provided, that such disclosure is reasonably considered by Bayer to be necessary to comply with the terms and conditions of the Patent License Agreement; and further provided, that Mitsui is obligated to maintain the confidentiality of Licensee’s Information as set forth herein for the benefit of Licensee. Notwithstanding the foregoing, if a receiving Party is required to make any such disclosure of the disclosing Party’s confidential Information, other than pursuant to a confidentiality agreement, the receiving Party will give reasonable advance notice to the disclosing Party of such disclosure and, save to the extent inappropriate in the case of patent applications, will use its reasonable efforts to secure confidential treatment of such Information prior to its disclosure (whether through protective orders or otherwise).

  • DTC DIRECT REGISTRATION SYSTEM AND PROFILE MODIFICATION SYSTEM (a) Notwithstanding the provisions of Section 2.4 of the Deposit Agreement, the parties acknowledge that DTC’s Direct Registration System (“DRS”) and Profile Modification System (“Profile”) apply to the American Depositary Shares upon acceptance thereof to DRS by DTC. DRS is the system administered by DTC that facilitates interchange between registered holding of uncertificated securities and holding of security entitlements in those securities through DTC and a DTC participant. Profile is a required feature of DRS that allows a DTC participant, claiming to act on behalf of an Owner of American Depositary Shares, to direct the Depositary to register a transfer of those American Depositary Shares to DTC or its nominee and to deliver those American Depositary Shares to the DTC account of that DTC participant without receipt by the Depositary of prior authorization from the Owner to register that transfer.

  • Heating, Ventilation and Air Conditioning Landlord shall furnish to the Premises heating, ventilation and air-conditioning (“HVAC”) in accordance with the Design Standards set forth in Exhibit D during Ordinary Business Hours. Landlord shall have access to all air-cooling, fan, ventilating and machine rooms and electrical closets and all other mechanical installations of Landlord (collectively, “Mechanical Installations”), and Tenant shall not construct partitions or other obstructions which may interfere with Landlord’s access thereto or the moving of Landlord’s equipment to and from the Mechanical Installations. No Tenant Party shall at any time enter the Mechanical Installations or tamper with, adjust, or otherwise affect such Mechanical Installations. Landlord shall not be responsible if the HVAC System fails to provide cooled or heated air, as the case may be, to the Premises in accordance with the Design Standards by reason of (i) any equipment installed by, for or on behalf of Tenant, which has an electrical load in excess of the average electrical load and human occupancy factors for the HVAC System as designed, or (ii) any rearrangement of partitioning or other Alterations made or performed by, for or on behalf of Tenant. Tenant shall install, if missing, blinds or shades on all windows, which blinds and shades shall be subject to Landlord’s approval, and shall keep operable windows in the Premises closed, and lower the blinds when necessary because of the sun’s position, whenever the HVAC System is in operation or as and when required by any Requirement. Tenant shall cooperate with Landlord and shall abide by the rules and regulations which Landlord may reasonably prescribe for the proper functioning and protection of the HVAC System. Tenant acknowledges that the server room in the Premises currently has three heat pumps installed, being two 4-ton units, and one 2.5-ton unit (the “Existing Heat Pumps”). The 2.5-ton unit is currently connected and operational. Tenant shall determine whether it is satisfied with the condition of the Existing Heat Pumps and Landlord shall not have any responsibility or liability for the condition, operation, maintenance, repair or replacement of the Existing Heat Pumps. Tenant may operate the Existing Heat Pumps. Tenant shall be responsible for, and pay directly for, all necessary maintenance and repairs to the Existing Heat Pumps. Tenant shall reimburse Landlord monthly for the cost of all utility services used to operate the Existing Heat Pumps within 10 Business Days after receipt of Landlord’s invoice for such amount. Landlord may measure Tenant’s usage of such utility services by either a sub-meter or by other reasonable methods such as by temporary check meters or by survey. Tenant, at its cost, may replace the Existing Heat Pumps with one or more new heat pumps, provided, however, that the capacity of such replacement heat pump(s) shall not exceed the 10.5-ton capacity cooling capacity of the Existing Heat Pumps.

  • Installation Tenant may install and use Tenant's Lines and make connections and disconnections at the terminal blocks as described above, provided Tenant shall: (i) obtain Landlord's prior written approval of all aspects thereof, (ii) use an experienced and qualified contractor designated or approved in writing in advance by Landlord (whom Landlord may require to enter an access and indemnity agreement on Landlord's then standard form of agreement therefor), (iii) comply with such inside wire standards as Landlord may adopt from time to time, and all other provisions of this Lease, including Paragraph 8 respecting alterations, and the Building rules respecting access to the wire closets, (iv) not install Lines in the same sleeve, chaseway or other enclosure in close proximity with electrical wire, and not install PVC-coated Lines under any circumstances, (v) thoroughly test any riser Lines to which Tenant intends to connect any Lines to ensure that such riser Lines are available and are not then connected to or used for telephone, data transmission or any other purpose by any other party (whether or not Landlord has previously approved such connections), and not connect to any such unavailable or connected riser Lines, and (vi) not connect any equipment to the Lines which may create an electromagnetic field exceeding the normal insulation ratings of ordinary twisted pair riser cable or cause radiation higher than normal background radiation, unless the Lines therefor (including riser Lines) are appropriately insulated to prevent such excessive electromagnetic fields or radiation (and such insulation shall not be provided by the use of additional unused twisted pair Lines). As a condition to permitting installation of new Lines, Landlord may require that Tenant remove any existing Lines located in or serving the Premises.

  • Business Continuity and Disaster Recovery Bank shall maintain and update from time to time business continuation and disaster recovery procedures with respect to its global custody business, which are designed, in the event of a significant business disruption affecting Bank, to be sufficient to enable Bank to resume and continue to perform its duties and obligations under this Agreement without undue delay or disruption. Bank shall test the operability of such procedures at least annually. Bank shall enter into and shall maintain in effect at all times during the term of this Agreement reasonable provision for (i) periodic back-up of the computer files and data with respect to Customer and (ii) use of alternative electronic data processing equipment to provide services under this Agreement. Upon reasonable request, Bank shall discuss with Customer any business continuation and disaster recovery procedures of Bank. Bank represents that its business continuation and disaster recovery procedures are appropriate for its business as a global custodian to investment companies registered under the 1940 Act.

Time is Money Join Law Insider Premium to draft better contracts faster.