G4 definition

G4. , ‘GY6.35’ and ‘G9’ means an electrical interface of a light source consisting of two small pins at distances of 4, 6.35 and 9 mm respectively, as defined in standards;
G4. , ‘GY6.35’ and ‘G9’ means an electrical interface of a light source consisting of two small pins at distances of 4,
G4. = “[***]” = the aggregate number of Prime Die of such Design ID [***] Multi-Chip Products during the Measurement Period; “H” = “Worldwide [***] Wafers [***] Per Node” = the sum of the following for each Design ID manufactured using such Process Node: the quotient of (a) the sum of (i) the aggregate number of Prime Die of such Design ID contained in Non-HMC DRAM Products (whether in die, wafer, packaged, module or subsequent form, excluding Prime Die of such Design ID contained on Multi-Chip Products) [***] Non-HMC DRAM Products of such Design ID [***] Non-HMC DRAM Products of such Design ID for Micron and its consolidated Affiliates during the Measurement Period, plus (ii) the aggregate number of Prime Die of such Design ID contained on Multi-Chip Products [***] for Micron and its consolidated Affiliates during the Measurement Period, divided by (b) the average number of Prime Die per wafer of such Design ID manufactured [***] Micron and its consolidated Affiliates in the Measurement Period, [***] [***] divided by (c) [***] for such Non-HMC DRAM Products in the Measurement Period; “I” = “Worldwide Revenue [***] Factor Per Node” = ((J / G) – (K / N)) / (K / N);

Examples of G4 in a sentence

  • Unless more frequent deviation reporting is specified in the permit, any other deviation shall be documented in the semi-annual monitoring report and the annual compliance certification (see G4 and G5).

  • Condition G4 – Fit and proper persons as Governors and Directors (also applicable to those performing equivalent or similar functions) 1.

  • The proposed by-laws, which must include a Conflict of Interest Policy for board members and a stated commitment to the NC Open Meetings Law (Appendix G).4.

  • Article G.4 Customer/Contractor Training MaterialsNIH will make available, via the NITAAC website, training materials that will assist customers and contractors in using the contract.

  • For components G4 through G7, increased costs represent actual costs incurred.

  • Article G.4 Customer/Contractor Training Materials NIH will make available, via the NITAAC website, training materials that will assist customers and contractors in using the contract.

  • Adjustments of billed central services are required when there is a difference between the revenue generated by each billed service and the actual allowable costs (A-87, Attachment C, paragraph G.4).

  • G.2 INVOICE SUBMITTAL G.2.1 The Contractor shall submit proper invoices on a monthly basis or as otherwise specified in Section G.4. Invoices shall be prepared in duplicate and submitted to the agency Chief Financial Officer (CFO) with concurrent copies to the Contracting Officer's Technical Representative (COTR) specified in Section G.9 below.

  • G.4 Strength of Insurer All insurance shall be placed with insurers that are reasonably acceptable to the Department and with an A.M. Best’s rating of not less than A- (Excellent) and a surplus size of not less than XV.

  • G-15 G.4 Mobile Appendix ..........................................................................................................


More Definitions of G4

G4 means Group 4 Xxxxx A/S, a Denmark corporation, and its successors.
G4 means that it is a GEOS-4 met field file/ (b) "45" is the resolution code (in this case 4x5). (c) "19" is the number of met fields stored w/in the file.

Related to G4

  • PNode has the meaning set forth in the CAISO Tariff.

  • RAM means random access memory.

  • SDSL or "Symmetric Digital Subscriber Line" is a baseband DSL transmission technology that permits the bi-directional transmission from up to 160 kbps to 2.048 Mbps on a single pair. "VDSL" or "Very High Speed Digital Subscriber Line" is a baseband DSL transmission technology that permits the transmission of up to 52 Mbps downstream (from the Central Office to the End User Customer) and up to 2.3 Mbps digital signal upstream (from the End User Customer to the Central Office). VDSL can also be 26 Mbps symmetrical, or other combination.

  • RFT means Request for Tender.

  • Airside means, generally, those areas of an Airport which requires a person to pass through a security checkpoint to access. References to "sterile areas" generally mean Airside areas within terminal buildings. References to "Airfield", "Aircraft Operations Area", "AOA", or "Secured areas" generally mean outdoor Airside areas or areas not accessible to passengers.

  • GAC10 means granular activated carbon filter beds with an empty-bed contact time of 10 minutes based on average daily flow and a carbon reactivation frequency of every 180 days, except that the reactivation frequency for GAC10 used as a best available technology for compliance with MCLs under subsection 9.2.1.2 shall be 120 days.

  • CDSL means Central Depository Services (India) Ltd.

  • Towers means the communications towers on the Sites.

  • Modules means the Base Modules and Extended Modules.

  • Pipe or “Piping” means a hollow cylinder or tubular conduit that is constructed of non-earthen materials.

  • Flat coating means a coating that is not defined under any other definition in this section and that registers gloss less than 15 on an 85-degree meter or less than 5 on a 60-degree meter.

  • Tube means an x-ray tube, unless otherwise specified.

  • Antenna coating means a coating labeled and formulated exclusively for application to equipment and associated structural appurtenances that are used to receive or transmit electromagnetic signals.

  • Connector means a flanged, screwed, welded, or other joined fitting used to connect two pipelines or a pipeline and a piece of process equipment.

  • Broadband or “Broadband Service” means any service defined as Broadband, or having advanced telecommunications capability, in the most recent Federal Communications Commission inquiry pursuant to Section 706 of the Telecommunications Act of 1996 (P.L. 104-104).2

  • Nematode means invertebrate animals of the phylum nemathelminthes, and class nematoda, i.e., unsegmented round worms with elongated, fusiform, or saclike bodies covered with cuticle, and inhabiting soil, water, plants, or plant parts, may also be called nemas or eelworms.

  • PO or “Purchase Order” means this Contract.

  • Node means an area designated by the State Planning Commission concentrating facilities and activities which are not organized in a compact form.

  • Vector means a carrier that is capable of transmitting a pathogen from one organism to another including, but not limited to, flies and other insects, rodents, birds, and vermin.

  • Touch-up coating means a coating used to cover minor coating imperfections appearing after the main coating operation.

  • Sensor means any measurement device that is not part of the vehicle itself but installed to determine parameters other than the concentration of gaseous and particle pollutants and the exhaust mass flow.

  • Loop or "Unbundled Loop" shall have the meaning set forth in Section 9.2.1.

  • Clean energy means Energy that qualifies as energy generated by a clean or renewable resource under British Columbia’s Clean Energy Act, SBC 2010, c.22, as amended from time to time.

  • Synchronous means instruction delivered by the virtual education teacher and received by the student concurrent in time;

  • MECOD refers to the Multiple Exchange Carriers Ordering and Design Guidelines for Access Services - Industry Support Interface, a document developed by the Ordering/Provisioning Committee of the OBF, which functions under the auspices of the CLC of ATIS. The MECOD document, published by ATIS as ATIS/OBF- MECAB- Issue 3, February 1993, establishes methods for processing orders for access service which is to be provided to an IXC by two or more telecommunications providers.

  • GPS means Global Positioning System.