Copolymer definition

Copolymer means polymers comprising copolymerized units resulting from copolymerization of two or more comonomers including dipolymers, terpolymers, tetrapolymers.
Copolymer means the polyoxyethylene/polyoxypropylene copolymer designated as CRL-1005 in the License Agreement.
Copolymer means the polyoxyethylene/polyoxypropylene copolymer designated by Vaxcel as CRL-1005, as more specifically described in Appendix 2, and any other copolymers added to the Program in accordance with Section 2.2 (iii).

Examples of Copolymer in a sentence

  • Table 1 - Requirements for Styrene-Butadiene Copolymer (SB/SBS) Modified Asphalt Binders TestAsphalt Grade SB/SBS PG 64-28SB/SBS PG 70-22Asphalt Grade SB/SBS PG 64-34SB/SBS PG 70-28SB/SBS PG 76-22SB/SBS PG 76-28Separation of PolymerITP, "Separation of Polymer from Asphalt Binder"Difference in °F (°C) of the softening point between top and bottom portions 4 (2) max.

  • Copolymer based, blend of cement and proprietary ingredients, requires the addition of water.

  • Replaster over crack with solvent- based Styrene Acrylic Co-polymer such as Midas Plaster Repair or similar in strict accordance with the manufacturer's instructions, including preparation and curing.

  • Effect of Molecular Weight and Salt Concentration on Conductivity of Block Copolymer Electrolytes.

  • Olvera de la Cruz “ Formation of Swollen Micelles and Inverse Swollen Micelles Using a Block Copolymer with Favorable Interactions” Abstracts of Papers, 2006 Fall ACS National Meeting, San Francisco, CA, Sept.

  • Effect of Ion Distribution on Conductivity of Block Copolymer Electrolytes.

  • The facility manufactures Terathane Polyethylene Glycol Block Copolymer (TPEG), which is a Polyether Polyol.

  • Table 1 - Requirements for Styrene-Butadiene Copolymer (SB/SBS) Modified Asphalt Binders TestAsphalt Grade SB/SBS PG 64-28SB/SBS PG 70-22Asphalt Grade SB/SBS PG 64-34SB/SBS PG 70-28SB/SBS PG 76-22SB/SBS PG 76-28Separation of PolymerITP, "Separation of Polymer from Asphalt Binder"Difference in °F (°C) of the softeningpoint between top and bottom portions 4 (2) max.

  • Copolymer polypropylene shall be Type II, grade 16906 meeting ASTM designation D2146-78.

  • Copolymer based, blend of cement and proprietary ingredients, requires the addition of water; used as an adhesive to laminate Insulation Board to the WeatherSeal Spray & Roll-on water-resistive barrier.


More Definitions of Copolymer

Copolymer means a compound resulting from the polymerization of two monomers. The polymerization most commonly used in the vinyl industry is the combination of vinyl chloride monomer and vinyl acetate monomer. When these two different types of monomers are combined, the products resulting from such polymerization are called copolymers, which confer properties different to those of homopolymers, mainly the ability to reduce the softening point of a product to improve its processing and obtain greater flexibility. Copolymers are used primarily in the manufacture of floor tiles, packaging sheets, and carpet backings.
Copolymer means a certain series of 12,000 kd molecular weight polyoxyethylene / polyoxypropylene copolymers, as more specifically described on Exhibit B, and covered by the claims in the Patent Rights.
Copolymer means any composition or reaction product that results in the production of a molecule or molecules comprising at least two monomers; a "terpolymer" would be included in this definition.
Copolymer means all technology covered by the Copolymer Patents that is related to the polyoxyethylene/polyoxypropylene copolymer designated by Vaxcel as CRL-1005, as more specifically described in Exhibit III hereto.

Related to Copolymer

  • Polymer means a substance consisting of molecules characterised by the sequence of one or more types of monomer units. Such molecules must be distributed over a range of molecular weights wherein differences in the molecular weight are primarily attributable to differences in the number of monomer units. A polymer comprises the following:

  • Polyolefin adhesive means an aerosol adhesive designed to bond polyolefins to substrates.

  • Pyrolysis means the thermal degradation of a substance in the absence of any oxidising agent, which does not form part of the substance itself, to produce char and gas and/or liquid; and

  • Polystyrene foam means blown polystyrene and expanded and

  • Oxides of nitrogen means the sum of the volume mixing ratio (ppbv) of nitrogen monoxide (nitric oxide) and nitrogen dioxide expressed in units of mass concentration of nitrogen dioxide (µg/m3);

  • Polystyrene foam adhesive means an aerosol adhesive designed to bond polystyrene foam to substrates.

  • Cannabinoid edible means food or potable liquid into which a cannabinoid concentrate, cannabinoid extract or dried marijuana leaves or flowers have been incorporated.

  • Tetrahydrocannabinol means the natural or synthetic equivalents of the substances contained in the plant, or in the resinous extractives of, Cannabis sativa, or any synthetic substances, compounds, salts, or derivatives of the plant or chemicals and their isomers with similar chemical structure and pharmacological activity.

  • Total tetrahydrocannabinol means the sum of the percentage by weight of tetrahydrocannabinolic acid multiplied by eight hundred seventy-seven thousandths plus the percentage of weight of tetrahydrocannabinol.

  • Brachytherapy source means a radioactive source or a manufacturer-assembled source train or a combination of these sources that is designed to deliver a therapeutic dose within a distance of a few centimeters.

  • Cannabinoid means any of the chemical compounds that are the active constituents of marijuana.

  • Biodegradable means degradable through a process by which fungi or bacteria secrete enzymes to convert a complex molecular structure to simple gasses and organic compounds.

  • Cannabidiol means a finished preparation containing, of its total cannabinoid content, at least 98 percent cannabidiol and not more than 0.90 percent tetrahydrocannabinol by volume that has been extracted from marijuana or synthesized in a laboratory.

  • Nitrogen oxides means nitric oxide and nitrogen dioxide, expressed as nitrogen dioxide (NO2);

  • Cannabinoid concentrate means a substance obtained by separating cannabinoids from marijuana by:

  • cannabis resin means the separated resin, whether crude or purified, obtained from any plant of the genus Cannabis;

  • Cannabinoid extract means a substance obtained by separating cannabinoids from marijuana by:

  • Brachytherapy means a method of radiation therapy in which sealed sources are utilized to deliver a radiation dose at a distance of up to a few centimeters, by surface, intracavitary, or interstitial application.

  • nanomaterial means a natural, incidental or manufactured material containing particles in an unbound state or as an aggregate or as an agglomerate and where, for 50 % or more of the particles in the number size distribution, one or more external dimensions is in the size range 1-100 nm;

  • Chemicals means substances applied to forest lands or timber including pesticides, fertilizers, and other forest chemicals.

  • Halogen means one of the chemical elements chlorine, bromine or iodine.

  • Aerosol coating product means a pressurized coating product containing pigments or resins that dispenses product ingredients by means of a propellant, and is packaged in a disposable can for hand-held application, or for use in specialized equipment for ground traffic/marking applications.

  • Epinephrine auto-injector means a device for immediate self-administration or administration by another trained person of a measured dose of epinephrine to a person at risk of anaphylaxis.

  • Nematode means invertebrate animals of the phylum nemathelminthes, and class nematoda, i.e., unsegmented round worms with elongated, fusiform, or saclike bodies covered with cuticle, and inhabiting soil, water, plants, or plant parts, may also be called nemas or eelworms.

  • Chemical agent shall mean any compound which, when suitably disseminated, produces incapacitating, damaging or lethal effects on people, animals, plants or material property.

  • Pyrophoric material means any liquid that ignites spontaneously in dry or moist air at or below 130° F (54.4° C) or solid, other than one classed as an explosive, which under normal conditions is liable to cause fires through friction, retained heat from manufacturing or processing, or which can be ignited readily and, when ignited, burns so vigorously and persistently as to create a serious transportation, handling, or disposal hazard. Included are spontaneously combustible and water-reactive materials.