WORK TO BE PERFORMED BY THE CONTRACTOR FOR THE WORK Sample Clauses

WORK TO BE PERFORMED BY THE CONTRACTOR FOR THE WORK. The scope of work is about dismantling, removing of the existing pipe work and the supply, delivery, and installation of the ash pipes at units 2,3,4,5 to 6. The works includes the following:  A total of 3564m length of pipe will be replaced. This is a total for all five lines, with partial replacement on unit 4 ash line.  The total number of bends to manufacture and supply is 55 Flanged on both sides (Flange table 16 BS4504, 16 holes and M24 bolts).  Connection of bends to the straight section line must be flange to flange. All bends to be manufactured as built due to the unavailability of drawings. The contractor to provide drawings (in a CAD format or software that is compatible with CAD) for all bends supplied. It is the responsibility of the contractor to confirm measurements before fabrication (fabricate as per sample or as built). For each bend two 12m length pipe flanged on one side will be required, this means a total length of 1320m pipe is required.  Supply long barrel Xxxxxxx couplings as per specification provided (56 Xxxxxxx couplings). On the straight section Xxxxxxx couplings needs to be 36m apart. The gap between two pipes when connecting Xxxxxxx coupling must be between 20mm -40mm.  Supply clamps (1150 clamps) as shown in the sketch provided.  Supply of 25 Ton crane for removal and installation of pipes.  Old pipe line will have to be removed and stacked neatly at the site 500m away from Duvha Power station main entrance. This site will be provided and shown to the contractor by Eskom.  Refurbished plinths (230) or pipe supports with brackets and hold down bolts. For refurbished plinths and where brackets/hold down bolts are missing, chemical anchors to be utilized for the hold down bolts. Grouting on the gap between the pipe and the plinth must be supplied by contractor.  Paint the entire line till the distribution point once it is completed.
Sample 1
AutoNDA by SimpleDocs

Related to WORK TO BE PERFORMED BY THE CONTRACTOR FOR THE WORK

  • Services to be performed by Contractor In consideration of the payments set forth herein and in Exhibit “B,” Contractor shall perform services for County in accordance with the terms, conditions and specifications set forth herein and in Exhibit “A.”

  • WORK TO BE PERFORMED The Contractor shall do all work and furnish all labor, tools, materials, supplies and equipment for the 2018 Replacement Well 3 Drilling Project (“Work”) in accordance with, and as described in the plans, specifications, drawings, instructions and other documents provided by the City, as amended which are by this reference incorporated herein and made part hereof (the “Contract Documents”). To the extent applicable or reasonably necessary to interpret the Work, the most recent publication of the Standard Specifications for Road, Bridge and Municipal Construction of the Washington State Department of Transportation (see xxxx://xxx.xxxxx.xx.xxx/Publications/Manuals/M41-10.htm) is incorporated into the Contract Documents. All changes in the work shall be performed in accord with the Contract Documents, unless determined otherwise by the City. The Contractor, as set forth in the Contractor’s bid proposal attached hereto as Exhibit A (the "Bid Proposal"), shall assume and be responsible for the cost and expense of all Work provided in the and Contract Documents, except those items agreed in writing to be furnished by the City of Xxxxxx. The Mayor or designee shall administer and be the primary contact for Contractor. Prior to commencement of work, Contractor shall contact the Mayor or designee to review the Work, schedule, and time of completion. Contractor shall receive written authorization from the City to proceed with the Work. Upon notice from the Mayor or designee, Contractor shall promptly commence Work, complete the same in a timely manner, and cure any failure in performance under this Agreement. All Work shall be performed in conformance with the Contract Documents, City and State standards and Bid Proposal. Contractor acknowledges review of the Contract Documents and accepts the same. In the event of a conflict between the Contract Documents, City and State standards or Bid Proposal, they shall be interpreted and given precedence in the order listed herein.

  • TERMINATION BY THE CONTRACTOR If the Work is stopped for a period of thirty days under an order of any court or other public authority having jurisdiction, or as a result of an act of government, such as a declaration of a national emergency making materials unavailable, through no act or fault of the Contractor or a Subcontractor or their agents or employees or any other persons performing any of the Work under a contract with the Contractor, or if the Work should be stopped for a period of thirty days by the Contractor because the Architect has not issued a Certificate for Payment as provided in Paragraph 9.7 of these General Conditions or because the State has not made payment thereon as provided in Paragraph 9.7, then the Contractor may, upon seven additional days written notice to the State and the Architect, terminate the Contract and recover from the State payment for all Work executed and for any proven loss sustained upon any materials, equipment, tools, construction equipment and machinery, including reasonable profit and damages.

  • Release by the Contractor The acceptance by the Contractor of final payment shall release NYSERDA from all claims and liability that the Contractor, its representatives and assigns might otherwise have relating to this Agreement.

  • Contract Work The provision of goods and services identified in the Contract constitute the contract work (Contract Work). Contractor shall perform the Contract Work pursuant to the terms of the Contract. Contractor shall furnish all labor, materials, equipment, tools, transportation, services, appliances, and appurtenances for the Contract Work in strict conformity with this Contract, within the time-period prescribed by the City.

  • For the Contractor Name: Xxxxxxx XxXxxxxxxx Phone: 000-000-0000 Email: xxxxxxx.xxxxxxxxxx@xxxxxxx.xxx

  • STATEMENT OF SERVICES TO BE PERFORMED A. Vendor shall provide Worker(s) to DIR Customers to perform services that are defined in the Work Order Solicitation, in accordance with the terms and conditions of the Contract. Workers provided by Vendor shall possess qualifications that meet or exceed those specified in the Work Order Solicitation and will perform the functions as outlined in the Work Order Solicitation at the rates quoted therein. All travel is subject to the prior, written approval of the Customer.

  • Subcontractor Any vendor, subcontractor or other Person that is not responsible for the overall servicing (as “servicing” is commonly understood by participants in the mortgage-backed securities market) of Mortgage Loans but performs one or more discrete functions identified in Item 1122(d) of Regulation AB with respect to Mortgage Loans under the direction or authority of the Servicer or a Subservicer.

  • The Contractor must 16.1.1. treat all Authority Protected Information as confidential and safeguard it accordingly, implementing appropriate technical and organisational measures to protect Authority Protected Information against disclosure;

  • INDEPENDENT CAPACITY OF THE CONTRACTOR The parties intend that an independent contractor relationship will be created by this contract. The CONTRACTOR and his or her employees or agents performing under this contract are not employees or agents of the AGENCY. The CONTRACTOR will not hold himself/herself out as or claim to be an officer or employee of the AGENCY or of the State of Washington by reason hereof, nor will the CONTRACTOR make any claim of right, privilege or benefit that would accrue to such employee under law. Conduct and control of the work will be solely with the CONTRACTOR.

Time is Money Join Law Insider Premium to draft better contracts faster.