Seams Sample Clauses
Seams. Clean seam areas, overlap roof membrane, and hot-air weld side and end laps of roof membrane and sheet flashings to ensure a watertight seam installation.
1. Test lap edges with probe to verify seam weld continuity. Apply lap sealant to seal cut edges of roof membrane and flashing sheet.
2. Verify field strength of seams a minimum of twice daily, and repair seam sample areas.
3. Repair tears, voids, and lapped seams in roof membrane that do not comply with requirements.
Seams. The upper woven and lower knit panels shall be joined with 4 thread mock stitch and single needle top stitch to prevent puckering, while providing a smooth, comfortable seam against the body.
Seams. All seams shall be stitched and sealed with a compatible barrier tape film.
Seams. ▇▇▇▇▇ is almost never seamless due to the techniques employed to cut the slab of Stone in a way that preserves the maximum beauty of such Stone. Pieces of Stone must therefore be fitted together and the Stone used in the Home will not be seamless and may have visible seams, which are not defects.
Seams. We guarantee professionally constructed durable seams. Professionally constructed seams are not invisible seams. There are many factors affecting whether a seam will be visible including but not limited to the type and amount of natural or artificial lighting in the room, the thickness, construction and color of the carpet. For additional details, refer to ▇▇▇.▇▇▇▇▇▇▇▇▇▇▇▇.▇▇▇/▇▇▇▇▇▇-▇▇▇▇▇.▇▇▇. Should be removed for best carpet installation Door cutting is not included in your quote, if this should become necessary.
Seams. Sewn seams shall have 6-8 stitches per inch. The sewing techniques used shall be either three thread ▇▇▇▇▇▇▇▇ ▇▇▇▇▇ or straight/chain stitch. Welded seams shall be performed either by heat or ultrasonic welding.
Seams. Clean splices, apply splicing cement, and firmly roll side and end laps of overlapping sheets. Seal exposed edges of sheet terminations.
Seams. We guarantee professionally constructed durable seams. Professionally constructed seams are NOT invisible seams. There are many factors affecting whether a seam will be visible including but not limited to natural/artificial lighting, the thickness of the product, and the construction and color of the product. We make every effort to place seams in locations that will help reduce visibility and product waste. Most carpet manufacturers exclude staircases/landings as well as high moisture areas from their warranties. Please contact your sales representative for any specific concerns about a product warranty. No pattern is without skew, and no room is built perfectly square. We do our best to get the most pleasing look in the room, but some run off is possible. Products made from natural materials (hardwood, stone tile, ceramic tile, and wool) have natural variations. These natural variations are not defects, and no refund will be made for natural products that have normal color, texture, and appearance variations.
Seams. Fabricate nonmoving seams with flat-lock seams. Form and seal seams as required for type of metal fabrication:
1. Tin edges to be seamed, form seams, and solder.
2. Form seams and seal with elastomeric sealant unless otherwise recommended by sealant manufacturer for intended use. Rivet joints where necessary for strength.
Seams o Inverted seams (no taped edges) to aid in bed bug resistance. o Non-Zipper and Zipper cover options available o This Collegiate Series – Innerspring Mattress meets: