Prototype Installation & Certification Sample Clauses

Prototype Installation & Certification. Compensation [***] prior to the scheduled installation, Aircell will provide, on-dock at American, a complete installation kit (this kit to [***].
AutoNDA by SimpleDocs
Prototype Installation & Certification. Compensation
Prototype Installation & Certification. Compensation [***] to the scheduled installation, Aircell will provide, on-dock at American, a complete installation [***]. American Airlines, Inc. and Aircell LLC Confidential and Proprietary Information ENGINEERING SERVICES Aircell will provide an engineering installation drawing package for installation on American’s airplanes consisting of all applicable install drawings and installation work instructions. In addition, Aircell will provide Continued Airworthiness documents which include at a minimum [***]. The System component placement and design will take the following into consideration: • Consistency of locations relative to all fleet types • Compliance with applicable FAA regulations and safety practices – Ease of installation – Maintainability – Future system growth & expansion – Cost effectiveness During the design phase Aircell will coordinate the following milestones with American: – Aircraft Audits – ITCM- Initial Technical Coordination Meeting – PDR- Preliminary Design Review – CDR- Critical Design Review – FDR – Final Design Review Final ABS System configuration is pending an audit of each the 757 fleet to be installed. Airline will provide access to the airplanes and all related technical publications and OEM aircraft drawings to complete each engineering design package. Aircell will provide on-site engineering support as provided in Section 8.1.3 of the Agreement. [***] American Airlines, Inc. and Aircell LLC Confidential and Proprietary Information Exhibit P-5 EXHIBIT R-1 757 FLEET LAUNCH PRELIMINARY CALENDAR The Schedule details below dates, expected aircraft quantities and tail numbers. This information is preliminary and is therefore subject to change at American’s sole discretion. Type AC# Fleet Subfleet Dock Span Start Finish [***] [***] [***] [***] [***] [***] [***] [***] A’merican Airlines, Inc. and Aircell LLC Confidential and Proprietary Information EXHIBIT S

Related to Prototype Installation & Certification

  • TERMINATION CERTIFICATION This is to certify that I do not have in my possession, nor have I failed to return, any devices, records, data, notes, reports, proposals, lists, correspondence, specifications, drawings, blueprints, sketches, laboratory notebooks, flow charts, materials, equipment, other documents or property, or copies or reproductions of any aforementioned items belonging to [Company Name], a Delaware corporation, its subsidiaries, affiliates, successors or assigns (collectively, the “Company”). I further certify that I have complied with all the terms of the Company’s Confidential Information and Invention Assignment Agreement signed by me, including the reporting of any Inventions (as defined therein), conceived or made by me (solely or jointly with others) covered by that agreement. I further agree that, in compliance with the Confidential Information and Invention Assignment Agreement, I will preserve as confidential all trade secrets, confidential knowledge, data or other proprietary information relating to products, processes, know-how, designs, formulas, developmental or experimental work, computer programs, data bases, other original works of authorship, customer lists, business plans, financial information or other subject matter pertaining to any business of the Company or any of its employees, clients, consultants or licensees. I further agree that for twelve (12) months from the date of this Certification, I shall not either directly or indirectly solicit, induce, recruit or encourage any of the Company’s employees or consultants to terminate their relationship with the Company, or attempt to solicit, induce, recruit, encourage or take away employees or consultants of the Company, either for myself or for any other person or entity. Further, I agree that for twelve (12) months from the date of this Certification, I shall not use any Confidential Information of the Company to negatively influence any of the Company’s clients or customers from purchasing Company products or services or to solicit or influence or attempt to influence any client, customer or other person either directly or indirectly, to direct any purchase of products and/or services to any person, firm, corporation, institution or other entity in competition with the business of the Company. Date: Employee: (Print Employee’s Name) (Signature)

  • Completion Certificate Upon completion of Construction Works and the Independent Engineer determining the Tests to be successful, it shall forthwith issue to the Concessionaire and the Authority a certificate substantially in the form set forth in Schedule-J (the “Completion Certificate”).

  • COMPENSATION CERTIFICATION Labor Code Section 3700 in relevant part provides: Every employer except the State shall secure the payment of compensation in one or more of the following ways: • By being insured against liability to pay compensation by one or more insurers duly authorized to write compensation insurance in this State. • By securing from the Director of Industrial Relations a certificate of consent to self-insure, which may be given upon furnishing satisfactory proof to the Director of Industrial Relations of ability to self-insure and to pay any compensation that may become due to its employees. I am aware of the provisions of Section 3700 of the Labor Code which require every employer to be insured against liability for workers’ compensation or to undertake self-insurance in accordance with the provisions of that code, and I will comply with such provisions before commencing the performance of the Work of this Contract. Date: Name of Consultant: Signature: Print Name and Title: (In accordance with Article 5 – commencing at Section 1860, Chapter 1, part 7, Division 2 of the Labor Code, the above certificate must be signed and filed with the District prior to performing any Work under this Contract.)

  • CHILD SUPPORT CERTIFICATION Under Section 231.006, Texas Family Code, the Engineer certifies that the individual or business entity named in this contract, bid, or application is not ineligible to receive the specified grant, loan, or payment and acknowledges that this contract may be terminated and payment may be withheld if this certification is inaccurate. If the above certification is shown to be false, the Engineer is liable to the state for attorney’s fees, the cost necessary to complete the contract, including the cost of advertising and awarding a second contract, and any other damages provided by law or the contract. A child support obligor or business entity ineligible to receive payments because of a payment delinquency of more than thirty (30) days remains ineligible until: all arrearages have been paid; the obligor is in compliance with a written repayment agreement or court order as to any existing delinquency; or the court of continuing jurisdiction over the child support order has granted the obligor an exemption from Subsection (a) of Section 231.006, Texas Family Code, as part of a court- supervised effort to improve earnings and child support payments.

  • Owner Certification During the term of this Contract, the Owner certifies that:

  • RECYCLING CERTIFICATION The Contractor shall certify in writing under penalty of perjury, the minimum, if not exact, percentage of post consumer material as defined in the Public Contract Code Section 12200, in products, materials, goods, or supplies offered or sold to the State regardless of whether the product meets the requirements of Public Contract Code Section 12209. With respect to printer or duplication cartridges that comply with the requirements of Section 12156(e), the certification required by this subdivision shall specify that the cartridges so comply (Pub. Contract Code §12205).

  • Drug-Free Workplace Certification As required by Executive Order No. 90-5 dated April 12, 1990, issued by the Governor of Indiana, the Contractor hereby covenants and agrees to make a good faith effort to provide and maintain a drug-free workplace. The Contractor will give written notice to the State within ten (10) days after receiving actual notice that the Contractor, or an employee of the Contractor in the State of Indiana, has been convicted of a criminal drug violation occurring in the workplace. False certification or violation of this certification may result in sanctions including, but not limited to, suspension of contract payments, termination of this Contract and/or debarment of contracting opportunities with the State for up to three (3) years. In addition to the provisions of the above paragraph, if the total amount set forth in this Contract is in excess of $25,000.00, the Contractor certifies and agrees that it will provide a drug-free workplace by:

  • Punch List If, at any time after the Project has been Physically Completed, there shall exist any item or items requiring completion or correction, then the Developer agrees to use all reasonable diligence to complete or correct such item or items so that each conforms to the Final Plans. The parties shall make a Punch-List of the items requiring completion or correction (the "Punch List"). Each item on the Punch-List shall be assigned a reasonable value based upon the reasonable cost of completion or correction of the same or such other value as may be required by the Owner's lender ("Punch-List Amount"). The Developer shall give its written undertaking to complete each such item within forty-five (45) days (or such other period of time as is mutually agreed upon by the parties).

  • E-VERIFY CERTIFICATION Pursuant to Executive Order RP-80, Engineer certifies and ensures that for all contracts for services, Engineer shall, to the extent permitted by law, utilize the United States Department of Homeland Security’s E-Verify system during the term of this agreement to determine the eligibility of:

  • CERTIFICATION OF NO ASBESTOS CONTAINING MATERIALS OR WORK 8.1 The Contractor shall be responsible for ensuring that no asbestos containing materials or work is included within the scope of the Work. The Contractor shall take whatever measures it deems necessary to insure that all employees, suppliers, fabricators, material men, subcontractors, or their assigns, comply with this requirement.

Time is Money Join Law Insider Premium to draft better contracts faster.