Flinders University. 2.2 Staff employed by Flinders University and classified as either Academic staff or Professional staff who work at one of the Flinders University campus locations, with the exception of:
Flinders University Sample Clauses
Related to Flinders University
University Any notice may be served upon the University by delivering it, in writing, to the University at the address set forth on the last page of this Agreement, by depositing it in a United States Postal Service deposit box with the postage fully prepaid and with the notice addressed to the University at the aforementioned address, or by sending a facsimile of it to the University facsimile number set forth on the last page of this Agreement.
Research, Science and Technology Cooperation 1. The aims of cooperation in research, science and technology, carried out in the mutual interest of the Parties and in compliance with their policies, will be: (a) to build on existing agreements already in place for cooperation on research, science and technology; (b) to encourage, where appropriate, government agencies, research institutions, universities, private companies and other research organizations in the Parties to conclude direct arrangements in support of cooperative activities, programs or projects within the framework of this Agreement, specially related to trade and commerce; and (c) to focus cooperative activities towards sectors where mutual and complementary interests exist, with special emphasis on information and communication technologies and software development to facilitate trade between the Parties. 2. The Parties will encourage and facilitate, as appropriate, the following activities including, but not limited to:
Xxxxx, Haldimand, Norfolk (a) An employee shall be granted five working days bereavement leave with pay upon the death of the employee’s spouse, child, stepchild, parent, stepparent, legal guardian, grandchild or step-grandchild.
Washtenaw Community College Eastern Michigan University Xxxxxx Xxxxxxxxxx College of Engineering & Technology Student Services BE 214 xxx_xxxxxxxx@xxxxx.xxx; 734.487.8659 734.973.3398
Millwright Xxxxx be to assist and work under the direction and instructions I or A. He will work alone at times performing assignments in keeping with his training. During the course of his year, training must become proficient in good practices in the areas of fitting, aligning, lubricating and the operation of all shop tools and machines. In addition to the foregoing, he will be exposed to and the process of learning techniques required in trouble shooting key production machinery, pipe fitting, basic welding and machining but not be expected to display a high degree of proficiency in these areas at this point. Millwright Must be capable of performing the tasks of fittings, aligning, lubricating an able to operate all shop tools and machines. Must under direction become proficient in basic welding and pipe fitting as well as dismantling and reassembly of plant equipment. Under direction,will continueto develop skills in trouble shooting all plant equipment and improve his skills at machining part and be exposed to basic principles of hydraulics and pneumatic. He may work alone frequently, but occasionally will require direction and instructions form Millwright I or A. Millwright 11: be capable, without direction of fitting, aligning and lubrication and taking apart and reassembling plant equipment. In addition, is expected to be able to weld, operate shop tools and do pipe fitting as required. Must under direction, become proficient at effective methods of trouble shooting and repairing hydraulic, pneumatic and mechanical faults in plant machinery. I: Must be capable without direction of performing all practices under Xxxxxxxxxx Must under directionbecomeproficient at reading and understanding blueprints, all phases of installing new equipment, laying out hydraulic and mechanical drives and meet speed and power requirements correctly. Xxxxxxxxxx "A": Must he capable without direction, of performing all under Xxxxxxxxxx X, and Must take full responsibility for work done by himself or his assistant. Must he in possession of a Millwright Certificate or a Machinist Certificate or Welder Certificate. Millwrightspresently employed in this classification will not be required to have a Certificate.
Technology Transfer Subject to the terms of the Development Supply Agreement, as soon as reasonably practicable, but in no event later than the fifth (5th) anniversary of the Effective Date, Alnylam shall initiate a technology transfer to MedCo, or to its Third Party manufacturer(s) of Licensed Product, selected by MedCo and reasonably acceptable to Alnylam, of Alnylam Know-How that is reasonably necessary or useful for the Manufacture of the Licensed Product, and shall make available its personnel on a reasonable basis to consult with MedCo or such Third Party manufacturer(s) with respect thereto, all at MedCo’s expense, including the Costs reasonably incurred by Alnylam in connection with such technology transfer activities. MedCo shall reimburse Alnylam such Costs incurred with respect to such Manufacturing technology transfer within [***] days after receipt of an invoice therefor. Alnylam and its Affiliates shall keep complete and accurate records in sufficient detail to enable the payments payable hereunder to be determined. Alnylam shall not be required to perform technology transfer to more than one Third Party manufacturer for each stage of the Licensed Product supply chain (i.e., Bulk Drug Substance, Bulk Drug Product and Finished Product). Promptly after MedCo’s written request, Alnylam shall use Commercially Reasonable Efforts to assign to MedCo any manufacturing agreement between Alnylam and a Third Party that is solely related to the manufacture of Licensed Products. Such assignment shall be subject to the terms and conditions of such agreement, including any required consents of such Third Party and MedCo’s written agreement to assume all the obligations of Alnylam under such agreement to be undertaken after such assignment, but Alnylam shall remain solely responsible for its obligations under such agreement arising prior to such assignment. Except as provided in the immediately preceding sentence, MedCo shall be solely responsible for contracting with such Third Party manufacturer (and any other Third Party manufacture to whom Alnylam has initiated technology transfer as set forth in this Section 5.3) for the supply of such Licensed Product and Alnylam shall have no obligations under such agreement between MedCo and such Third Party manufacturer. Alnylam shall use Commercially Reasonable Efforts to obtain any such consent in a form reasonably acceptable to MedCo.
Faculty Development Faculty who develop and/or teach Distance Education courses shall be provided with reasonable technical support and opportunities for Faculty development, consistent with the needs of the Faculty and availability of Board resources and services for that purpose. In the event that a Faculty member develops and/or teaches a Distance Education course for the first time, the Faculty member shall receive reasonable and appropriate professional development and technical support assistance, consistent with the needs of the Faculty and availability of Board resources and services for that purpose. In instances of succeeding assignments to teach Distance Education courses, the Faculty member is expected to demonstrate a level of technical competence sufficient to teach the course. Ongoing technical support assistance may be available to Faculty who teach succeeding offerings of the same course.
Přetrvávající platnost Tento odstavec 1.3 “Zdravotní záznamy a Studijní data a údaje” zůstane závazný i v případě zániku platnosti či vypršení platnosti této Smlouvy.
University strategies Our aspirations and key priorities for enhancing teaching and learning quality We aspire to produce flexible and creative thinkers – leaders for Australia and the wider world. To do this, we need to provide an enriching university experience that equips our graduates with enquiring minds and essential life skills in critical thinking and communication. Our students must have excellent opportunities to participate in co-curricular activities if they wish to do so, and have access to high quality infrastructure and support services. To maintain and build on our success in these areas, our short- to medium-term priorities will focus on three complementary areas. Our plans Renewing our curriculum and learning environments We will continue to implement our curriculum renewal strategy by pursuing a coordinated University-wide process of reform of our courses. At the heart of this strategy lies a commitment to providing an 'engaged enquiry' learning experience for our students, in order to strengthen the development of our graduate attributes. Such learning experiences reflect the University’s reputation for both research and community engagement. They are consistent with our students' expectations as learners and our staff as teachers. 'Engaged enquiry’ provides the vehicle by which we will focus on further enhancing the research and inquiry learning outcomes that are central to our graduate attributes. We are currently mapping students’ reports of research- enriched learning experiences, and working with our Engaged Enquiry Scholars networks to identify and disseminate examples of approaches that xxxxxx effectively the development of research skills by our undergraduate students. The second aspect of our ‘engaged enquiry' curriculum strategy is the embedding of community- engaged learning, including work-integrated learning (WIL), in our curricula. This commitment will involve professional disciplines in particular, in further strengthening the engagement of employers in our teaching and curriculum development, and in further developing our pedagogical expertise in this area to inform curriculum renewal. One example of how we are pursuing this agenda is seen in the establishment of a new WIL research group in the Faculty of Health Sciences. Our approach to curriculum renewal will continue to be both holistic and sustainable. We will use University-wide agreed principles to link our faculties’ curriculum renewal work explicitly to the need for responsiveness to external drivers. These include employer needs, accreditation and regulatory accountabilities, changes in student and employment market needs, and the renewal of our physical and virtual teaching infrastructure outlined in Section 4.4.2 (Teaching and Learning Infrastructure) of this compact. Building on the findings of recent Office for Learning and Teaching (OLT) projects we will seek, through implementation of our new assessment policy, to develop our assessment practices to provide better direct evidence of student achievement of our graduate attributes. Our unit and course evaluation processes will provide clear accountability mechanisms to assist in monitoring students’ development of graduate attributes, including generic skills. During the next phase of reform we will implement a systematic process of faculty-led curriculum reviews, and support faculties to refine their understanding of how research-enriched and community-engaged pedagogies can deliver an engaged enquiry experience for students in different disciplines. This pedagogical work will build on the substantial body of excellent practice already in place in many parts of the University. It will also respond to the outcomes of relevant OLT projects, and will be supported by the development of new institutional datasets on our students’ experiences of the development of graduate attributes through engaged enquiry. There will also be new support for enhanced curriculum governance and review through our central teaching and curriculum committees. We will initiate new strategic curriculum projects and establish additional Teaching Scholars Networks to develop agreed curriculum benchmark standards and xxxxxx curriculum and teaching expertise across the faculties. Through collaboration between disciplines and faculties, our curriculum renewal projects will generate new resources and benchmark standards for use in future curriculum reviews and professional development for our staff. Enhancing teaching quality, support and recognition Alongside and supporting the process of curriculum reform is our work on enhancing and further valuing the high quality of teaching and curriculum across the institution. Following consistent improvements over the past five years in our performance against measures of student experience of their courses (Student Course Experience Questionnaires) we recently developed and introduced the first stage of a new University-wide strategy to enhance the quality of our students' experiences in all units of study. Through compacts on faculty teaching standards, we will continue to use a University-agreed teaching standards framework to help faculties address teaching quality issues. This process will be supported by new institutional data reporting processes. Each year, faculties will be required to negotiate improvement targets aligned to University-agreed standards and their own strategic priorities, and will be supported to identify and address quality issues. Longer term, we will embed these compacts in an annual cycle of planning, reporting and monitoring. We will extend the scope of our faculty teaching compacts to draw on a broader range of data than that relating to units of study, and will include additional institutional standards in relation to other institutional teaching priorities, such as engaged enquiry. During the life of our 2014-16 compact, we will extend this support to individual teachers through the rollout of the new Academic Planning and Development process for teaching, as well as through research and ongoing enhancements to our range of professional development opportunities for University teachers and research higher degree supervisors. This will complement the University’s enhancement and support for the career opportunities for teachers through the University’s new academic promotion process. It will also allow us to develop further the University and faculty teaching award and grants schemes. We will build institutional recognition for our talented teachers by engaging them in our curriculum renewal process, connecting them with each other through the establishment of additional Teaching Scholars Networks and by providing opportunities for their further professional development. Recognition of the importance of excellence in teaching will also be supported by the annual Sydney Teaching Colloquium, a successful initiative launched in 2011, which brings together the university teaching community to celebrate their achievements, critically debate key educational initiatives and share their expertise and exemplary practice. Improving the student experience Our Teaching and Learning strategies recognise that student wellbeing and the general quality of their experience while at university must underpin our efforts to improve teaching and learning. During the timeframe of our 2014-16 compact, we will deliver a greater coherence across all aspects of the student experience. This will include improvements in priority areas such as: enhancing the student enrolment and ongoing administration process by completing the Sydney Student project providing specialist services and resources to support the emotional and mental wellbeing of students, such as personal counselling and psychological resilience resources establishing early identification systems for students, particularly those from underrepresented groups and international students, who may be struggling in the early phase of their studies developing and expanding existing formal and informal support networks through consistent mentor training and staff development programs collaborating with our student representative organisations, to ensure that income from the Student Services and Amenities Fee (SSAF) is used effectively to enhance access to amenities such as sports and cultural activities, the social dimensions of clubs and societies, and also to improve the quality and affordability of food and beverages available on campus endeavouring to maintain the high ratings we have received from the National Union of Students for our approach to involving students in decisions about the allocation of SSAF funds expanding affordable accommodation options around our campuses. Note: All calendar year references below relate to projects and awards in that calendar year. Principal Performance Indicators Baseline 2012 Progressive Target 2013 Progressive Target 2014 Progressive Target 2015 Target 2016
NO HARDSTOP/PASSIVE LICENSE MONITORING Unless an Authorized User is otherwise specifically advised to the contrary in writing at the time of order and prior to purchase, Contractor hereby warrants and represents that the Product and all Upgrades do not and will not contain any computer code that would disable the Product or Upgrades or impair in any way its operation based on the elapsing of a period of time, exceeding an authorized number of copies, advancement to a particular date or other numeral, or other similar self-destruct mechanisms (sometimes referred to as “time bombs,” “time locks,” or “drop dead” devices) or that would permit Contractor to access the Product to cause such disablement or impairment (sometimes referred to as a “trap door” device). Contractor agrees that in the event of a breach or alleged breach of this provision that Authorized User shall not have an adequate remedy at law, including monetary damages, and that Authorized User shall consequently be entitled to seek a temporary restraining order, injunction, or other form of equitable relief against the continuance of such breach, in addition to any and all remedies to which Authorized User shall be entitled.
