Design and Description Sample Clauses

Design and Description. The VESSEL shall have the BUILDER’s Hull No. 304 and be designed constructed, equipped and completed by the BUILDER in accordance with the provisions of this Contract, based on BUILDER’s Hull No. 299 (BLUE PROTECTOR) as reference vessel for selection of equipment and solutions, including the Specifications dated 15th of November 2013 signed by each of the Parties hereto for identification and attached hereto and made an integral part of this Contract and delivered by the BUILDER to the BUYER, in consideration of the BUYER paying the Contract Price as and on the dates agreed herein. Any change of make from the reference vessel is subject to prior written approval from the BUYER which shall not be unreasonably withheld. In the event of inconsistency between this Contract and the Specifications and this Contract shall prevail. In the event of inconsistency between the specifications and the drawings, the specifications shall prevail. In case of inconsistency between any of the drawings, the later in date shall prevail. All intellectual property allotted to the Design and its Specification shall be the sole property of Ulstein. Any and all modifications, adaptations or improvements of any Design and/or Specifications suggested by Ulstein and/or drafted by the Ulstein at the request of BUILDER or BUYER, shall be the exclusive property of Ulstein”.
Sample 1Sample 2Sample 3See All (4)
AutoNDA by SimpleDocs

Related to Design and Description

  • LOCATION AND DESCRIPTION The subject property is a 3-bedroom apartment and bearing postal address es Unit No. 11-8, 11th Floor, Pangsapuri Jati Selatan, Xx. 0, Xxxxx 0/000X, 00000 Xxxxx Xxxxxx. Accommodation:- Living area, dining area, master bedroom attached bathroom and dressing room, 2 bedrooms, bathroom, kitchen, yard and balcony. RESERVE PRICE:- The property will be sold on an “as is where is basis” subject to a reserve price of RM210,600.00 (RINGGIT MALAYSIA TWO HUNDRED TEN THOUSAND AND SIX HUNDRED ONLY) (subject to any others taxes implemented, whenever applicable) and to the Conditions of Sale by way of an As signment from the above Assignee and subject to the consent being obtained from the Developer and other relevant authorities, if any and all expenses incurred in obtaining the said consent shall be borne by the Purchaser. All intending bidders are required to deposit with the Bank’s Solicitor a sum equivalent to 10% of the reserve price by BANK DRAFT in favour of Citibank Berhad (Xxx Xxxx Xxxxx & Xxxxx Xx Mooi @ Xxxxx Xxxxx Mooi) prior to the commencement of the auction sale. The balance of the purchase money to be settled within ninety (90) days from the date of the sale to Messrs. YH Teh & Quek, Solicitors for the Assignee / Bank. FOR FURTHER PARTICULARS, please apply to Messrs. YH Teh & Quek, Solicitors for the Assignee/Lender, at Unit 15-02, Menara Centara, 000, Xxxxx Xxxxx Xxxxx Xxxxxx, 50100 Kuala Lumpur. (Ref No: CT/WCC/17296/18/LN/s, Tel No: 00-0000 0000 Fax No: 00-0000 0000) or the undermentioned Auctioneer: EHSAN AUCTIONEERS SDN. BHD. (Co. No. 617309-U) DATO’ XXXXX XXXXX BIN P.V. ABDU (D.I.M.P) Xxxxx X-00-0X, Xxxxx 00, Xxxxx X, Xxxxx Xxxxxx II, / XXXXX XXXXX BIN XXXXXX 00, Xxxxx Xxx Xxxx Xxxx, 50450 Kuala Lumpur (Licensed Auctioneers) Tel.: 00-00000000 Fax: 00-00000000 Ref.: HANA/CB1846/YHTQ Bank Code: E/T&Q/000-000-000000/3 E-mail: xxxxxx@xxxxxxxxxxxxxxxx.xxx Website: xxx.xxxxxxxxxxxxxxxx.xxx PERISYTIHARAN JUALAN DALAM PERKARA PERJANJIAN KEMUDAHAN, PENYERAHAN HAK (PIHAK PERTAMA) XXX SURAT KUASA WAKIL KESEMUANYA BERTARIKH 20HB OKTOBER, 2003 DI ANTARA CITIBANK BERHAD [No. Pendaftaran 199401011410 (297089-M)] Pihak Pemegang Serahhak / Bank XXX XXX XXXX XXXXX (NO. KP: 731201-09-5077/A2606771) XXXXX XX MOOI @ XXXXX XXXXX MOOI (NO. KP: 540210-06-5142/4566917) Pihak Penyerahhak / Peminjam Dalam perkara Perjanjian Kemudahan, Penyerahan Hak (Pihak Pertama) xxx Surat Kuasa Wakil kesemuanya bertarikh 20hb Oktober, 2003 di antara Pihak Pemegang Serahhak xxx Pihak Penyerahhak (“Perjanjian Kemudahan (Pihak Pertama) Penyerahan Hak (Pihak Pertama) xxx Surat Kuasa Wakil kesemuanya tersebut”) adalah dengan ini diperisytiharkan bahawa Pihak Pemegang Serahhak dengan dibantu oleh Pelelong yang tersebut dibawah ini akan menjual harta yang ters ebut dibawah secara:- LELONGAN AWAM PADA 26HB MAC, 2021 BERSAMAAN HARI JUMAAT, JAM 11.00 PAGI, XX XXXXX LELONGAN “EHSAN AUCTIONEERS SDN. BHD.” SUITE C-0-3A, TINGKAT UG, BLOK C, MEGAN AVENUE I I, 00, XXXXX XXX XXXX XXXX, 50450 KUALA LUMPUR NOTA:- Xxxxx -xxxxx pembeli adalah dinasihatkan agar: (1) memeriksa hartanah tersebut, (2) meminta nasihat daripada Pihak Xxxxxx mengenai Syarat-syarat Jualan, (3) membuat carian Hakmilik Xxxxx xxxxxx rasmi di Pejabat Tanah xxx Pihak-pihak Berkuasa yang berkenaan, xxx (4) membuat pertanyaan dengan Pihak Pemaju xxx/atau pihak-pihak xxxx xxxx berkenaan mengenai persetujuan untuk jualan ini sebelum jualan lelong. BUTIR-BUTIR HAKMILIK:- Hakmilik strata telah dikeluarkan. No. Hakmilik Strata / No. Lot : Pajakan Negeri 34768/M1/12/189, Lot 43744 berserta dengan Xxxxx Aksesori No. A42 Mukim / Daerah / Negeri : Petaling / Kuala Lumpur / Wilayah Persekutuan Kuala Lumpur No. Xxxxx Pemaju : No. Xxxxx C-11-08, No. Tingkat 11, No. Bangunan Blok C, Desa Seri Puteri – Xxxxx C Pegangan : Pajakan selama 88 tahun, tamat pada 16hb November 2093 Keluasan Lantai : 77 meter persegi (xxxx-xxxx 829 kaki persegi) Penjual / Pemaju : Dwitasik Sdn Bhd (176849-A) Pemilik Berdaftar : The Datuk Bandar Kuala Lumpur Pemilik Benefisial : Xxx Xxxx Xxxxx & Xxxxx Xx Mooi @ Xxxxx Xxxxx Mooi Bebanan : Diserahhak kepada Citibank Berhad [No. Pendaftaran 199401011410 (297089-M)] Kategori Kegunaan Tanah : Xxxxx Kediaman Selain Kos Rendah (Xxxxx) Syarat-Syarat Nyata : Pangsapuri Kos Sederhana Sekatan Kepentingan : Tanah ini tidak boleh dipindahmilik, dipajak, dicagar atau digadai tanpa kebenaran Jawatankuasa Kerja Tanah Wilayah Persekutuan Kuala Lumpur. LOKASI XXX KETERANGAN HARTANAH:- Hartanah tersebut merupakan satu unit apartmen 3-xxxxx tidur xxx beralamat pos di No. Unit 11-8, 11th Floor, Pangsapuri Jati Selatan, Xx. 0, Xxxxx 0/000X, 00000 Xxxxx Xxxxxx. Akomodasi:- Ruang tamu, ruang makan, xxxxx tidur utama berserta xxxxx xxxxx xxx xxxxx salinan, 0 xxxxx xxxxx, xxxxx xxxxx, dapur, xxxxx xxx balkoni. HARGA RIZAB:- Hartanah tersebut akan dijual “sepertimana xxxxx xxx” tertakluk kepada satu harga rizab sebanyak RM210,600.00 (RINGGIT MALAYSIA DUA RATUS SEPULUH XXXX XXX ENAM RATUS SAHAJA) (tertakluk kepada cukai xxxx xxxx dilaksanakan, yang berkenaan) syarat-syarat yang terkandung dalam Perisytiharan Jualan dalam Bahasa Inggeris. Harta ini juga akan dijual melalui Suratcara Pinjaman xxx Penyerahhakkan tertaklu k kepada memperolehi kebenaran daripada Pihak Pemaju/Pihak Berkuasa Negeri di mana semua perbelanjaan untuk memperolehi kebenaran tersebut akan ditanggung oleh pembeli/penawar yang berjaya. Kesemua penawar yang ingin membuat tawaran dikehendaki mendeposi tkan kepada Peguamcara bagi Pihak Bank suatu jumlah yang bersamaan 10% daripada harga rizab secara BANK DERAF di atas nama Citibank Berhad (Xxx Xxxx Xxxxx & Xxxxx Xx Mooi @ Xxxxx Xxxxx Mooi), sebelum lelongan bermula. Baki wang belian hendaklah dijelaskan dalam tempoh sembilan puluh

  • Design and Construction In complying with the requirements of the specification both with respect to arrangement and detail, design is to conform to the best current engineering practice. Each of the several parts of the material is to be of the maker’s standard design provided that this design is in general accordance with the specification. The essence of design should be simplicity and reliability in order to give long continuous service with high economy and low maintenance cost. Particular attention should be paid to internal and external access in order to facilitate inspection, cleaning and maintenance. The design dimensions and materials of all parts are to be such that they will not suffer damage as a result of stresses under the most severe conditions. Fully detailed specifications of the several parts of the material are to be submitted describing particularly the materials to be used. The materials used in the construction of the material are to be of the highest quality and selected particularly to meet the duties required of them. Mechanisms are to be constructed to avoid sticking due to rust or corrosion. Workmanship and general finish are to be of the highest class throughout. All similar parts of the material are to be interchangeable. All equipment is to operate without undue vibration and with the least possible amount of noise and is not to cause a nuisance. All equipment is to be designed to minimize the risk of fire and any damage, which may be caused in the event of fire. The equipment is also to be designed to prevent ingress of all vermin, accidental contact with live parts and to minimize the ingress of dust and dirt. The use of materials, which may be liable to attack by termites or other insects, is to be avoided.

  • Project Description In two or three brief sentences, provide a concise description of your exhibition. Include the subject matter, type of objects to be included (paintings, sculpture, manuscripts, etc.), those responsible for organizing the exhibition, and catalogue author(s).

  • LOCATION AND DESCRIPTION OF THE PROPERTY The subject property is a service apartment unit bearing postal address of No. B-04-09, Block B, Apartment Dwi Danga, Xxxxx Xxxxxx, Xxxxxxx Xxxxxx Xxxxx, 00000 Xxxxx Xxxxx, Xxxxx Xxxxx Xxxxxx.

  • System Description The wet detention basin is designed to trap 80% of sediment in runoff and maintain pre-development downstream peak flows. The basin has two forebays (smaller ponds) located at the low end of two grass xxxxxx. In addition to runoff conveyance, the grass xxxxxx also allow infiltration and filtering of pollutants, especially from smaller storms. The forebays are each 4 feet deep. They are connected to the main pool by 18 and 24-inch metal pipes that outlet onto a rock chute. The forebays will trap coarse sediments in runoff, such as road sands, thus reducing maintenance of the main basin. The main pool will trap the finer suspended sediment. To do this, the pond size, water level and outlet structures must be maintained as specified in this Agreement (see Figures 1, 2 and 3). The main basin receives runoff from a 67.1 acre drainage area (41.2 acres within the subdivision and 25.9 acres off-site drainage coming from the east). During high rainfall or snow melt events, the water level will temporarily rise and slowly drain down to the elevation of the control structure. The water level is controlled by a 12-inch concrete pipe extending through the berm in the northwest corner of the basin (see Figures 1 and 3). On the face of the 12-inch pipe, there is metal plate with a 3-inch drilled hole (orifice) with stone in front of it. This orifice controls the water level and causes the pond to temporarily rise during runoff events. Washed stone (1- 2” diameter) is placed in front of the orifice to prevent clogging. High flows may enter the grated concrete riser or flow over the rock lined emergency spillway. “As-built” construction drawings of the basin, showing actual dimensions, elevations, outlet structures, etc. will be recorded as an addendum(s) to this agreement within 60 days after [Municipality Name] accepts verification of construction from the project engineer.

  • Site Description 2.5.1 If reasonably requested by the A/E as necessary for the Project, the Owner shall furnish a legal description and a certified land survey of the Site, giving, as applicable, grades and lines of streets, alleys, pavements and adjoining property; rights-of-way, restrictions, easements, encroachments, zoning, deed restrictions, boundaries and contours of the Site; locations, dimensions, and complete data pertaining to existing buildings, other improvements, and trees; and full information concerning available service and utility lines, both public and private, above and below grade, including inverts and depths.

  • Work Description T-804 Opening Roads - Removal of closure devices, cleaning ditches, removing berms, and blading the traveled-way T-811 Closing Roads - Entrance treatment for 150' cross-rip; debris block (slash, earth, berm, rocks, etc.) + seed + water bar T-811 Closing Roads - Water bar frequency per BMPs for remainder of road T-811 Closing Roads - Engineering Rep. or Construction Inspector must be notified prior to performing closeout NFSR Road No. Lane Width & Maintenance Level Mile Marker Begin End 9312 Single Lane / Level 1 NFSR 300 0.00 END 0.40

  • General Description Employer shall provide Employee with the compensation, incentives, benefits, and business expense reimbursement specified elsewhere in this agreement.

  • Service Descriptions Available services for Transitional and Enhanced Supervision Services a. One (1) one-to-one meeting with the Contractor per week for case management services.

  • Service Description The Parties will provide Common Channel Signaling (CCS) to one another via Signaling System 7 (SS7) network Interconnection, in accordance with prevailing industry standards. Use of a third party provider of SS7 trunks is permitted.

Time is Money Join Law Insider Premium to draft better contracts faster.